UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C.  20549

FORM 10-K

☒     Annual report pursuant to Section 13 or 15(d) of the Securities Exchange Act of  1934

For the fiscal year ended June 28, 2020.

☐     Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

Commission File Number 0-25150

STRATTEC SECURITY CORPORATION

(Exact name of registrant as specified in its charter)

3333 West Good Hope Road, Milwaukee, WI 53209

(Address of principal executive offices)

(414) 247-3333

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. ☐Yes  ☒No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.

☐Yes  ☒No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. ☒Yes  ☐No

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).

☒Yes  ☐No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.:

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.     ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management's assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.☒

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).      ☐Yes   ☒No

The aggregate market value of the voting Common Stock held by non-affiliates of the registrant as of December 29, 2019 (the last business day of the Registrant’s most recently completed second quarter), was approximately $79,564,000 (based upon the last reported sale price of the Common Stock at December 27, 2019 on the NASDAQ Global Market). Shares of common stock held by any executive officer or director of the registrant have been excluded from this computation because such persons may be deemed to be affiliates. This determination of affiliate status is not a conclusive determination for other purposes.

On July 31, 2020, there were outstanding 3,819,669 shares of the Registrant’s $.01 par value Common Stock (which includes any unvested restricted shares previously awarded).

Documents Incorporated by Reference

STRATTEC SECURITY CORPORATION

ANNUAL REPORT IN FORM 10-K

June 28, 2020

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

A number of the matters and subject areas discussed in this Form 10-K as well as in portions of the Company’s Proxy Statement, dated September 3, 2020, which is incorporated herein by reference, contain “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995.  These statements may be identified by the use of forward-looking words or phrases such as “anticipate,” “believe,” “would,” “expect,” “intend,” “may,” “planned,” “potential,” “should,” “will” and “could,” or the negative of these terms or words of similar meaning.  These statements include expected future financial results, product offerings, global expansion, liquidity needs, financing ability, planned capital expenditures, management’s or the Company’s expectations and beliefs, and similar matters discussed, or otherwise incorporated herein by reference, in this Form 10-K.  The discussions of such matters and subject areas are qualified by the inherent risks and uncertainties surrounding future expectations generally, and also may materially differ from the Company’s actual future experience.  

The Company’s business, operations and financial performance are subject to certain risks and uncertainties, which could result in material differences in actual results from the Company’s current expectations. These risks and uncertainties include, but are not limited to, general economic conditions, in particular relating to the automotive industry, consumer demand for the Company’s and its customers’ products, competitive and technological developments, customer purchasing actions, changes in warranty provisions and customers’ product recall policies, work stoppages at the Company or at the location of its key customers as a result of labor disputes, foreign currency fluctuations, uncertainties stemming from U.S. trade policies, tariffs and reactions to same from foreign countries, changes in the costs of operations, changes in the volume and scope of product returns and warranty claims, adverse business and operational issues resulting from the Coronavirus (COVID-19) pandemic and other matters described under “Risk Factors” in Part I, Item 1A of this report.

Shareholders, potential investors and other readers are urged to consider these factors carefully in evaluating the forward-looking statements and are cautioned not to place undue reliance on such forward-looking statements.  The forward-looking statements made herein are only made as of the date of this Form 10-K and the Company undertakes no obligation to publicly update such forward-looking statements to reflect subsequent events or circumstances occurring after the date of this Form 10-K.

1

PART I

ITEM 1. BUSINESS

Basic Business

STRATTEC SECURITY CORPORATION designs, develops, manufactures and markets automotive access control products including mechanical locks and keys, electronically enhanced locks and keys, passive entry passive start systems (PEPS), steering column and instrument panel ignition lock housings, latches, power sliding side door systems, power tailgate systems, power lift gate systems, power deck lid systems, door handles and related products for primarily North American automotive customers. We also supply global automotive manufacturers through a unique strategic relationship with WITTE Automotive (“WITTE”) of Velbert, Germany and ADAC Plastics Inc., doing business as ADAC Automotive (“ADAC”), of Grand Rapids, Michigan called VAST Automotive Group (“VAST”). Under this unique strategic relationship STRATTEC, WITTE and ADAC market the products of each company to global customers under the “VAST Automotive Group” brand name (as more fully described under Vehicle Access Systems Technology LLC herein). STRATTEC products are shipped to customer locations in the United States, Canada, Mexico, Europe, South America, Korea, China and India, and we provide full service and aftermarket support for each VAST Automotive Group partners’ products.

History

The product line that became STRATTEC was part of Briggs & Stratton Corporation’s founding business in 1908. In 1995, STRATTEC was spun off from Briggs & Stratton through a tax-free distribution to the then-existing Briggs & Stratton shareholders and has been an independent public company for over twenty-five years.

Our history in the automotive security business spans over 110 years. STRATTEC has been the world’s largest producer of automotive locks and keys since the late 1920s, and we currently maintain a significant share of the North American markets for these products.

Products

Our traditional products are lock sets (locks and keys) for cars and light trucks. Typically, two keys are provided with each vehicle lockset.  Most of the vehicles we currently supply are using keys with sophisticated radio frequency identification technology for additional theft prevention. Keys with remote entry devices integrated into a single unit and bladeless electronic keys as well as turn-key passive entry passive start systems (PEPS) have been added to our product line and are gaining in popularity.

Ignition lock housings represent another access control product for us. These housings are the mating part for our ignition locks and typically are part of the steering column structure, although there are instrument panel-mounted versions for certain vehicle applications. These housings are either die cast from zinc or injection molded plastic and may include electronic components for theft deterrent systems.  

We have developed and are continuing to develop access control products, including trunk latches, lift gate latches, tailgate latches, hood latches, side door latches and related hardware. With our acquisition of Delphi Corporation’s Power Products Group in fiscal 2009, we are now supplying power access devices for sliding side doors, tailgates, lift gates and trunk lids. Through a joint venture formed with ADAC Automotive during fiscal 2007, we also supply painted and non-painted door handles and components and related vehicle access hardware.

In recent years, more and more vehicle access systems have moved from purely mechanical components to integrated electro-mechanical systems. STRATTEC has been at the forefront of this new technology, working with Original Equipment Manufacturers’ (OEMs) product development and purchasing groups to provide cost-effective, innovative solutions to the challenges facing our customers.

STRATTEC’s customer-focused structure and formalized product development process helps us identify and meet customer needs in the shortest time possible. From concept and design, through implementation and into the aftermarket, STRATTEC delivers products that provide the optimum value solution to security and access control requirements. We have a comprehensive Products & Solutions portfolio that can be viewed on our website at www.strattec.com (see “Available Information” below for additional information).

To maintain a strong focus on each of these access control products, we have Product Business Managers who oversee the product’s entire life cycle, including product concept, application, manufacturing, warranty analysis, service/aftermarket, and financial/commercial issues. The Product Business Managers work closely with our sales organization, our engineering group, and our manufacturing operations to ensure their products are receiving the right amount of quality attention so that their value to STRATTEC and the market place is enhanced.

2

Markets

We are a direct supplier to OEM automotive and light truck manufacturers as well as other transportation-related manufacturers. Our largest customers are Fiat Chrysler Automobiles, General Motors Company and Ford Motor Company. Our access control product mix varies by customer, but generally our overall sales tend to be highest in lock and key, including aftermarket produced by STRATTEC de Mexico, followed by door handles and trim components produced by ADAC-STRATTEC de Mexico, power access products produced by STRATTEC Power Access de Mexico, and latch mechanisms and ignition lock housing produced by STRATTEC de Mexico. See Operations discussion included herein for further description.

Direct sales to various OEMs represented approximately 77% of our total sales for fiscal 2020.  The remainder of our revenue is received primarily through sales to the OEM service channels, the aftermarket and Tier 1 automotive supplier customers, and sales of certain products to non-automotive commercial customers.

Sales to our major automotive customers, both OEM and Tier 1, are coordinated through direct sales personnel located in our Detroit-area office. Sales are also facilitated through daily interaction between our Program Managers, Application Engineers and other product engineering personnel. Sales to other OEM customers are accomplished through a combination of our sales personnel located in Detroit and personnel in our Milwaukee headquarters office.

The majority of our OEM products are sold in North America. While some exporting is done to Tier 1 and automotive assembly plants in Europe, Asia and South America, we are in the process of expanding our presence in these markets and elsewhere through the Vehicle Access Systems Technology LLC (VAST LLC) joint venture we jointly own with WITTE Automotive and ADAC Automotive.  VAST is described in more detail on pages 4, 5, and 43 through 45 in this Form 10-K.

OEM service and replacement parts are sold to the OEM’s own service operations. In addition, we distribute our components and security products to the automotive aftermarket through approximately 50 authorized wholesale distributors, as well as other marketers and users of component parts, including export customers. Increasingly, our products find their way into the retail channel, specifically the hardware store channel. Our ability to provide a full line of keys to that channel has been accomplished through the introduction of the STRATTEC “XL” key line. This extension to our product line includes keys that we currently do not supply on an OEM basis, including keys for Toyota, Honda and other popular domestic and import vehicles. This extended line of keys enables automotive repair specialists to satisfy consumer needs for repair or replacement parts. Our aftermarket activities are serviced through a warehousing operation in El Paso, Texas.

Customer Sales Focus

To bring the proper focus to the relationships with our major customers, we have six customer-focused teams, each with a Director of Sales, one or two Engineering Program Managers and various Customer Application Engineers. In addition to customer teams for General Motors, Ford and Fiat Chrysler, we currently have teams for New Domestic Vehicle Manufacturers (primarily the Japanese and Korean automotive manufactures), Driver Control/Ignition Lock Housing customers, Tier 1 customers, and Service and Aftermarket customers. Sales and engineering for ADAC-STRATTEC LLC (described in greater detail below) are supported by our partner in this joint venture, ADAC Automotive.  

Each Sales Director is responsible for the overall relationship between STRATTEC and a specific customer group.  Program Managers are responsible for coordinating cross functional activities while managing new product programs for their customers.

Product Engineering Focus

To best serve our customers’ product needs, STRATTEC’s engineering resources are organized into groups which focus on specific access control applications. We currently have six engineering groups:  Locks and Keys, Aftermarket, Latches, Power Access Devices, Driver Control/Ignition Lock Housings and Electrical. Each group has a Product Business Manager, an Engineering Manager and a complement of skilled engineers who design and develop products for specific applications. In doing this, each engineering group works closely with both the customer and product teams, Engineering Program Managers, and Application Engineers.

Underlying this organization is a formalized product development process to identify and meet customer needs in the shortest possible time. By following this streamlined development system, we shorten product lead times, tighten our response to market changes and provide our customers with the optimum value solution to their security/access control requirements. STRATTEC is also IATF 16949:2016 and ISO 14001 certified. This means we embrace the philosophy that quality should exist not only in the finished product, but in every step of our processes as well.

3

Operations

A significant number of the components that go into our products are manufactured at our headquarters in Milwaukee, Wisconsin. This facility produces zinc die cast components, stampings and milled key blades. We have three owned production facilities currently in operation in Juarez, Mexico operating as STRATTEC de Mexico. Plant No. 1 houses assembly operations for locksets and ignition lock housings. Plant No. 2 houses our key finishing and plastic injection molding operations, as well as containing dedicated space for the assembly operations of ADAC-STRATTEC de Mexico. Plant No. 3 houses both latch and power access assembly operations for STRATTEC Power Access de Mexico. Plant No. 4 is in Leon, Mexico and houses our custom paint system for door handles and assembly for ADAC-STRATTEC de Mexico and is owned by the ADAC-STRATTEC de Mexico joint venture.

Vehicle Access Systems Technology LLC

In fiscal 2001, we entered into a formal alliance with WITTE-Velbert GmbH, an automotive supplier based in Germany which designs, develops, manufactures and markets automotive access control products for European-based customers. This alliance consisted of two initiatives. The first was a set of legal agreements which allowed STRATTEC to manufacture and market WITTE’s core products in North America, and WITTE to manufacture and market STRATTEC’s core products in Europe. The second initiative was a 50:50 joint venture, WITTE-STRATTEC LLC, to invest in operations with local partners in strategic markets outside of Europe and North America.

In February of 2006, we announced the expansion of this alliance and related joint venture with the addition of a third partner, ADAC Plastics, Inc.  ADAC, of Grand Rapids, Michigan, adds North American expertise in door handles, a part of WITTE’s core product line that STRATTEC did not support, and an expertise in color-matched painting of these components.

With the expansion of the alliance, we can offer a full range of access control related products available on a global basis to support customer programs. To identify this powerful combination of independent companies focused on working together, we renamed the joint venture Vehicle Access Systems Technology LLC (VAST LLC). We now refer to the combination of the alliance structure and joint venture as “VAST Automotive Group” (VAST). WITTE is now called WITTE Automotive, and ADAC is now doing business as ADAC Automotive. We have adopted a common graphic image in which we share a logo mark and colors, and a specific VAST logo used on the partners’ printed and electronic presentation materials. What is now VAST made investments with a local partner in Brazil in September, 2001, and local partners in China in March, 2002. However, during fiscal 2010, VAST LLC purchased the remaining 40 percent interest of its local partners in the China venture. VAST China is now wholly owned by VAST LLC and had annual net sales of approximately $152 million and $162 million during fiscal 2020 and 2019, respectively. This was an important step which gives STRATTEC a one-third interest in VAST China’s activities in the important growing Chinese/Asian market for manufacturing and assembly of painted door handles, locksets and latch products. VAST China currently operates out of two manufacturing facilities in Taicang and Fuzhou, China and is in the process of constructing a third manufacturing facility in Jingzhou, China, which became operational during the fourth quarter of our fiscal 2020 to support new growth in the China market. In March, 2014, VAST LLC purchased the remaining 49 percent interest of its local partner in Brazil, which had annual net sales of approximately $1.4 million and $724,000 during fiscal years 2020 and 2019, respectively.

On April 30, 2015 VAST LLC executed a purchase agreement to become a 50:50 Joint Venture partner with Minda Management Services Limited, an affiliate of both Minda Corporation Limited and Spark Minda, Ashok Minda Group of New Delhi, India (collectively, “Minda”). As part of this transaction, VAST acquired a fifty percent equity interest in the former Minda-Valeo Security Systems joint venture entity, based in Pune, India. This joint venture entity was renamed Minda-VAST Access Systems (“Minda-VAST”). Minda-VAST has operations in Pune and Delhi and had annual sales of approximately $18 million and $30 million during fiscal years 2020 and 2019, respectively. Minda is a leading manufacturer of security & access products and handles, for both OEMs and the aftermarket in India. Minda-VAST financial results are accounted for on the equity method of accounting by VAST LLC.

For further VAST LLC financial information, see “Equity (Loss) Earnings of Joint Ventures” included in Notes to Financial Statements under Item 8 in this Form 10-K.

VAST is the embodiment of STRATTEC’s, WITTE’s and ADAC’s globalization strategy. We are developing VAST as a global brand with which we are jointly pursuing business with identified global customers. Those identified customers are General Motors, Ford, Fiat/Chrysler, Volkswagen, Honda, Volvo, Renault/Nissan and Hyundai/Kia.

4

To manage our customer relationships and coordinate global ventures and activities, we have established a VAST Management Group led by a President. The Management Group includes three Vice Presidents, one each from WITTE, STRATTEC and ADAC. With the focus provided by this Management Group, VAST is able to manage global programs with a single point of contact for customers, with the added advantage of providing regional support from the partners’ operating entities. Combined with VAST LLC’s ventures in China and Brazil, and sales/engineering offices in Japan and Korea, this structure establishes our global footprint.

5

STRATTEC de MEXICO

We have formed STRATTEC de Mexico as a wholly owned subsidiary of STRATTEC to own and operate three production facilities in Juarez, Mexico. At these three facilities we house our assembly operations for locksets and ignition lock housings, our key finishing and plastic injection molding operations, our assembly operations for ADAC-STRATTEC de Mexico noted below and our latch and power access assembly operations for STRATTEC POWER ACCESS de Mexico noted below.

ADAC-STRATTEC LLC and ADAC-STRATTEC de MEXICO

During fiscal 2007, we formed a new entity with ADAC Automotive called ADAC-STRATTEC LLC including a wholly owned Mexican subsidiary ADAC-STRATTEC de Mexico (collectively, ASdM). The purpose of this joint venture is to produce certain ADAC and STRATTEC products utilizing ADAC’s plastic molding injection expertise and STRATTEC’s assembly capability. ASdM currently operates out of defined space in STRATTEC de Mexico Plant No. 2 located in Juarez, Mexico. Products from this joint venture include non-painted door handle components and exterior trim components for OEM customers producing in North America. STRATTEC owns 51% of this joint venture and its financial results are consolidated into STRATTEC’s financial statements. In our fiscal years ending 2020 and 2019, ASdM was profitable and represented $98.2 million and $117.0 million, respectively, of our consolidated net sales. STRATTEC de Mexico Plant No. 4 is in Leon, Mexico and houses our custom paint system for door handles and assembly for ADAC-STRATTEC de Mexico.

6

STRATTEC POWER ACCESS LLC and STRATTEC POWER ACCESS de MEXICO

During fiscal year 2009, we formed a new subsidiary with WITTE Automotive called STRATTEC POWER ACCESS LLC (SPA) to acquire the North American business of the Delphi Power Products Group.  WITTE is a 20 percent minority owner. SPA in turn owns 100 percent of a Mexican subsidiary, STRATTEC POWER ACCESS de Mexico. The purpose of this subsidiary is to produce power access devices for sliding side doors, lift gates and trunk lids. STRATTEC POWER ACCESS de Mexico currently operates out of defined space in STRATTEC de Mexico Plant No. 3 located in Juarez, Mexico. Financial results for SPA are consolidated in STRATTEC’s financial statements. For fiscal year 2020, SPA was unprofitable due to the COVID-19 pandemic (COVID-19) and represented $63.8 million of our net sales. For fiscal year 2019, SPA was profitable and represented $92.7 million of our consolidated net sales.

STRATTEC Advanced Logic LLC

During the fourth quarter of fiscal year 2013, we formed a new joint venture with Actuator Systems LLC called NextLock LLC, which was subsequently renamed STRATTEC Advanced Logic LLC. STRATTEC owned 51% of this joint venture and its financial results were accounted for on the equity method of accounting. The purpose of this joint venture was to assemble and sell the next generation of biometric security products based upon the residential and commercial designs of Actuator Systems. This joint venture had minimal sales activity in both fiscal 2020 and 2019. During fiscal 2018, we, along with our joint venture partner, reduced operating the business of STRATTEC Advanced Logic LLC to selling only RTS commercial biometric locks. STRATTEC Advanced Logic LLC was dissolved during the fourth quarter of fiscal 2020.

Seasonal Nature of the Business

The manufacturing of components used in automobiles is driven by the normal peaks and valleys associated with the automotive industry. Typically, the months of July and August are relatively slow as summer vacation shutdowns and model year changeovers occur at the automotive assembly plants. September volumes increase rapidly as each new model year begins. This volume strength continues through October and into early November. As the holiday and winter seasons approach, the demand for automobiles slows, as does production.  March usually brings a major sales and production increase, which then continues through most of June. This results in our first fiscal quarter sales and operating results typically being our weakest, with the remaining quarters being more consistent.  

7

Vehicle List

2021 Vehicles

We are proud to be associated with many of the quality vehicles produced in North America and elsewhere.  

The following cars and light trucks are equipped with STRATTEC components during our 2021 fiscal year:

* Vehicles produced outside of North America, or both in and outside North America.

8

Emerging Technologies

Automotive vehicle access systems, which are both theft deterrent and consumer friendly, are trending toward electro-mechanical and connected devices.  Electronic companies are developing user identification systems such as bio-systems, card holder (transmitter) systems, etc., while mechanical locks, keys, housings, and latches are evolving to accommodate electronics. We believe we are positioning ourselves as a vehicle access control supplier by building our product, engineering and manufacturing expertise in the required electro-mechanical products, which include vehicle access latches, keys with remote entry electronic systems, ignition interface systems with passive start and phone as a key (PaaK) capabilities. In both 2018 and 2019, we were awarded the Automotive News Pace Award for Excellence and Innovation for our Invis-A-Rise^TM Power Liftgate and Invis-A-Rise^TM Power Tailgate products. As the automotive industry continues developing various levels of autonomous vehicles, we believe that we are well positioned to continue the development and incorporation of power sliding doors, power tailgates and other consumer convenience features into these types of vehicles.

These technologies benefit us by increasing our potential customer base as a Tier 2 supplier while maintaining our Tier 1 status on some product lines and by adding additional product line availability.

Sources and Availability of Raw Materials

Our primary raw materials are high-grade zinc, brass, nickel silver, steel, aluminum and plastic resins. These materials are generally available from a number of suppliers, but we have chosen to concentrate our sourcing with one primary vendor for each commodity. We believe our sources for raw materials are very reliable and adequate for our needs. We have not experienced any significant long term supply problems in our operations and do not anticipate any significant supply problems in the foreseeable future. See further discussion under “Risk Factors-Sources of and Fluctuations in Market Prices of Raw Materials” included under Item 1A of this Form 10-K.

Patents, Trademarks and Other Intellectual Property

We believe that the success of our business will not only result from the technical competence, creativity and marketing abilities of our employees but also from the protection of our intellectual property through patents, trademarks and copyrights. As part of our ongoing research, development and manufacturing activities, we have a policy of seeking patents on new products, processes and improvements when appropriate.

Although, in the aggregate, the intellectual property discussed herein are of considerable importance to the manufacturing and marketing of many of our access control products, we do not consider any single patent or trademark or group of related patents or trademarks to be material to our business as a whole, except for the STRATTEC and STRATTEC with logo trademarks.

We also rely upon trade secret protection for our confidential and proprietary information. We maintain confidentiality agreements with our key executives. In addition, we enter into confidentiality agreements with selected suppliers, consultants and employees as appropriate to evaluate new products or business relationships pertinent to our success. However, there can be no assurance that others will not independently obtain similar information and techniques or otherwise gain access to our trade secrets or that we can effectively protect our trade secrets.

Dependence Upon Significant Customers

A very significant portion of our annual sales are to General Motors Company, Ford Motor Company, and Fiat Chrysler Automobiles.  These three customers accounted for approximately 62 percent our net sales in 2020 and 60 percent of our net sales in 2019.  Further information regarding sales to our largest customers is set forth under the caption “Risk Factors - Loss of Significant Customers, Vehicle Content, Vehicle Models and Market Share” and “Risk Factors – Production Slowdowns by Customers” included under Item 1A of this Form 10-K and “Notes to Financial Statements-Sales and Receivable Concentration” included in Notes to Financial Statements under Item 8 in this Form 10-K.  

The products sold to these customers are model specific, fitting only certain defined applications. Consequently, we are highly dependent on our major customers for their business, and on these customers' ability to produce and sell vehicles which utilize our products. We have enjoyed good relationships with General Motors Company, Fiat Chrysler Automobiles, Ford Motor Company and other customers in the past, and expect to continue to do so in the future. However, a significant change in the purchasing practices of, or a significant loss of volume from, one or more of these customers could have a detrimental effect on our financial performance. We cannot provide any assurance that any lost sales volume could be replaced despite our historical relationships with our customers.

9

Sales and Marketing; Backlog

We provide our customers with engineered access control products including locksets, fobs, push button passive entry passive start ignition systems, steering column lock housings, electromechanical latches, power sliding door systems, power tailgate systems, power liftgate systems, power decklids, painted and non-painted door handles, door handle components and trim and other access products which are unique to specific vehicles. Any given vehicle will typically take 1 to 3 years of development and engineering design time prior to being offered to the public. The access control products are designed concurrently with the vehicle. Therefore, commitment to STRATTEC as the production source for such products and components occurs 1 to 3 years prior to the start of production for such components. We employ an engineering staff that assists in providing design and technical solutions to our customers. We believe that our engineering expertise is a competitive advantage and contributes toward our strong market position in our industry. For example, we regularly provide innovative design proposals for our product offerings to our customers that we believe will improve customer access, vehicle security system quality, theft deterrence and system cost.

The typical process used by automotive manufacturers in selecting a supplier for access control products is to offer the business opportunity to us and several of our competitors. Each competitor will pursue the opportunity, doing its best to provide the customer with the most attractive proposal. Price pressure is strong during this process but once an agreement is reached, a commitment is made for each year of the product program. Typically, price reductions resulting from productivity improvement by STRATTEC over the life of the product program are included in the contract and are estimated in evaluating each of these opportunities. A blanket purchase order, a contract indicating a specified part will be supplied at a specified price during a defined time period, is issued by customers for each model year. Production quantity releases or quantity commitments are made to that purchase order for weekly deliveries to the customer. As a consequence and because we are a "Just-in-Time" supplier to the automotive industry, we do not maintain a backlog of orders in the classic sense for future production and shipment and, accordingly, we are unable to provide a meaningful backlog comparison from year to year.

Competition

We compete with domestic and foreign-based competitors on the basis of custom product design, engineering support, quality, delivery and price. While the number of direct competitors in our product markets is currently relatively small, the automotive manufacturers actively encourage competition between potential suppliers. We have a large share of the North American market for our access control products because of our ability to provide optimal value, which is a beneficial combination of price, quality, technical support, program management, innovation and aftermarket support. In order to reduce access control product production costs while still offering a wide range of technical support, we utilize assembly operations and certain light manufacturing operations in Mexico, which results in lower labor costs as compared to the United States.

As locks and keys become more sophisticated and involve additional electronics, competitors with specific electronic expertise may emerge to challenge us. To address this, we have in recent years strengthened our electrical engineering knowledge and service. We are also working with several electronics suppliers to jointly develop and supply these advanced products.

Our lockset, steering column lock housing, latches and power access competitors include Huf North America, Ushin, Valeo, Tokai-Rika, Alpha-Tech, Honda Lock, Shin Chang, Magna, Edscha, Stabilus, Aisin, Brose, Mitsuba, Ohi, Kiekert, Inteva, Novares and Gecom. For additional information related to competition, see the information set forth under “Risk Factors-Highly Competitive Automotive Supply Industry” included under Item 1A of this Form 10-K.

Research and Development

We engage in research and development activities pertinent to automotive access control. A major area of focus for research is the expanding role of vehicle access via electronic interlocks and modes of communicating authorization data between consumers and vehicles. Development activities include new products, applications and product performance improvements. In addition, specialized data collection equipment is developed to facilitate increased product development efficiency and continuous quality improvements. For fiscal years 2020 and 2019, we incurred approximately $9.8 million and $13.8 million, respectively, on research and development. We believe that, historically, we have committed sufficient resources to research and development and we intend to continue to invest in the future as required to support additional product programs associated with both existing and new customers. Patents are pursued and will continue to be pursued as appropriate to protect our interests resulting from these activities.

Customer Tooling

We incur costs related to tooling used in component production and assembly.  Some of these costs are reimbursed by customers who then own the tools involved.  See the information set forth under “Organization and Summary of Significant Accounting Policies-Customer Tooling in Progress” included in Notes to Financial Statements under Item 8 in this Form 10-K.

10

Environmental Compliance

As is the case with other manufacturers, we are subject to Federal, state, local and foreign laws and other legal requirements relating to the generation, storage, transport, treatment and disposal of materials as a result of our manufacturing and assembly operations. These laws include the Resource Conservation and Recovery Act (as amended), the Clean Air Act (as amended), the Clean Water Act of 1990 (as amended) and the Comprehensive Environmental Response, Compensation and Liability Act (as amended). We have an environmental management system that is ISO-14001 certified.  We believe that our existing environmental management system is adequate and we have no current plans for substantial capital expenditures in the environmental area.    

As discussed in “Commitments and Contingencies” under Notes to Financial Statement under Item 8 in this Form 10-K, a site at our Milwaukee facility is contaminated by a solvent spill from a former above-ground solvent storage tank located on the east side of the facility, which spill occurred in 1985. We continue to monitor this situation.

We do not currently anticipate any materially adverse impact on our financial statements or competitive position as a result of compliance with Federal, state, local and foreign environmental laws or other legal requirements. However, risk of environmental liability and charges associated with maintaining compliance with environmental laws is inherent in the nature of our business and there is no assurance that material liabilities or charges could not arise.  

Employees

At June 28, 2020, we had approximately 3,831 full-time employees, of which approximately 200 or 5.2 percent were represented by a labor union, which accounts for all production employees at our Milwaukee facility.  The current contract with the unionized employees is effective through September 17, 2021.  During June 2001, there was a 16-day strike by the represented employees at our Milwaukee facility. Further information regarding the strike, work stoppages and other labor matters are discussed under “Risk Factors - Disruptions Due to Work Stoppages and Other labor Matters” under Item 1A in this Form 10-K.

Available Information

We maintain our corporate website at www.strattec.com and make available, free of charge, through this website our code of business ethics, annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, proxy statements for annual shareholder meetings and amendments to those reports that we file with, or furnish to, the Securities and Exchange Commission (the "Commission") as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Commission.  We are not including all the information contained on or made available through our website as a part of, or incorporating such information by reference into, this Annual Report on Form 10-K.  However, this report includes (or incorporates by reference) all material information about STRATTEC that is included on our website which is otherwise required to be included in this report.

ITEM 1A.  RISK FACTORS

We recognize we are subject to the following risk factors based on our operations and the nature of the automotive industry in which we operate:

Coronavirus or Other Health Epidemics – The Coronavirus (COVID-19) pandemic is adversely affecting, and is expected to continue to adversely affect, our operations and supply chains and we have experienced and expect to continue to experience reductions in demand for certain of our products and services as a result of the pandemic. Because we manufacture our products in facilities around the world, including in Mexico and through our joint venture partners in Europe, China and India, we are and will continue to be vulnerable to an outbreak of COVID-19 (or the resurgence of such an outbreak) or other contagious diseases in those regions as well as in the United States. The effects of COVID-19 and other contagious diseases have included and may continue to include disruptions or restrictions on our ability to travel, our ability to manufacture our affected products and our ability to ship these affected products to customers as well as disruptions that have and may continue to affect our key customers and suppliers, including those in these regions or other affected regions of the world, including in the United States, Mexico, China and neighboring countries. Current and future disruption of our ability to manufacture or distribute our products or of the ability of our customers to take orders of our products or our suppliers to deliver key raw materials on a timely basis has had and could continue to have a material adverse effect on our sales and operating results. In addition, the COVID-19 outbreak (or a worsening of this outbreak) and future outbreaks of contagious diseases in the human population has resulted in and could continue to result in a widespread health crisis that adversely affects the economies and financial markets of many countries (including those where we operate or where our products are ultimately used), resulting in an economic downturn that has and could continue to affect demand for our products and impact our operating results.

11

We have been adhering to guidelines and mandates from governmental and health organizations in the territories that we have locations and production facilities, and have implemented various risk mitigation plans to reduce the risk of spreading COVID-19. To that end, we have encouraged working remotely where applicable, adopted social distancing where appropriate, implemented travel restrictions, and we are taking actions to ensure that locations and facilities are cleaned and sanitized regularly. All of these actions may impact our operations and profitability. Further, we have complied with and may be required to comply with additional foreign, national, state or local governmental authority recommendations, guidelines, and/or mandates, which have resulted in and may result in additional temporary reduction in or suspension in work at certain of our locations and production facilities. All of these additional actions have and will continue to adversely impact our operating results.

Loss of Significant Customers, Vehicle Content, Vehicle Models and Market Share – Sales to General Motors Company, Ford Motor Company and Fiat Chrysler Automobiles represented approximately 62 percent of our annual net sales (based on fiscal 2020 results) and, accordingly, these customers account for a significant percentage of our outstanding accounts receivable. The contracts with these customers provide for supplying the customer’s requirements for a particular model. The contracts do not specify a specific quantity of parts. The contracts typically cover the life of a model, which averages approximately four to five years. Components for certain customer models may also be “market tested” annually. Therefore, the loss of any one of these customers, the loss of a contract for a specific vehicle model, a reduction in vehicle content, the early cancellation of a specific vehicle model, technological changes or a significant reduction in demand for certain key models could occur, and if so, could have a material adverse effect on our existing and future revenues and net income.

Our major customers also have significant under-funded legacy liabilities related to pension and postretirement health care obligations. The loss in our major customers’ North American automotive market share to the New Domestic automotive manufacturers (primarily the Japanese and Korean automotive manufacturers) and/or a significant decline in the overall market demand for new vehicles may ultimately result in severe financial difficulty for these customers, including bankruptcy. If our major customers cannot fund their operations, we may incur significant write-offs of accounts receivable, incur impairment charges or require restructuring actions.  

Production Slowdowns by Customers – Our major customers and many of their suppliers were significantly impacted by the Great Recession of 2008/2009. Many of our major customers instituted production cuts during our fiscal 2009 and 2010. While production subsequently increased after the cuts made in 2009, additional economic slowdowns or pandemics could bring about new production cuts which could have a material adverse effect on our existing and future revenues and net income.

Financial Distress of Automotive Supply Base – During the Great Recession, which impacted calendar years 2009 and 2010, deteriorating automotive industry conditions adversely affected STRATTEC and our supply base. Lower production levels at our major customers, volatility in certain raw material and energy costs and the global credit market crisis resulted in severe financial distress among many companies within the automotive supply base. During the above time frame, several automotive suppliers filed for bankruptcy protection or ceased operations. The potential continuation or renewal of financial distress within the supply base (whether from COVID-19 or otherwise) and suppliers’ inability to obtain credit from lending institutions could lead to commercial disputes and possible supply chain interruptions. In addition, the potential for future adverse industry conditions (including from COVID-19 or otherwise) may require us to provide financial assistance or other measures to ensure uninterrupted production. The continuation or renewal of these industry conditions could have a material adverse effect on our existing and future revenues and net income.

Shortage of Raw Materials or Components Supply – In the event of catastrophic acts of nature such as fires, tsunamis, hurricanes and earthquakes or a rapid increase in production demands, either we or our customers or other suppliers may experience supply shortages of raw materials or components. This could be caused by a number of factors, including a lack of production line capacity or manpower or working capital constraints. In order to manage and reduce the costs of purchased goods and services, we and others within our industry have been rationalizing and consolidating our supply base. As a result, there is greater dependence on fewer sources of supply for certain components and materials used in our products, which could increase the possibility of a supply shortage of any particular component. If any of our customers experience a material supply shortage, either directly or as a result of supply shortages at another supplier, that customer may halt or limit the purchase of our products. Similarly, if we or one of our own suppliers experience a supply shortage, we may become unable to produce the affected products if we cannot procure the components from another source. Such production interruptions could impede a ramp-up in vehicle production and could have a material adverse effect on our business, results of operations and financial condition.  

We consider the production capacities and financial condition of suppliers in our selection process, and expect that they will meet our delivery requirements. However, there can be no assurance that strong demand, capacity limitations, shortages of raw materials, labor disputes or other problems will not result in any shortages or delays in the supply of components to us.

Cost Reduction – There is continuing pressure from our major customers to reduce the prices we charge for our products. This requires us to generate cost reductions, including reductions in the cost of components purchased from outside suppliers. If we are unable to generate sufficient production cost savings in the future to offset pre-programmed price reductions, our gross margin and profitability will be adversely affected.

12

Cyclicality and Seasonality in the Automotive Market – The automotive market is cyclical and is dependent on consumer spending, on the availability of consumer credit and to a certain extent, on customer sales incentives. Economic factors adversely affecting consumer demand for automobiles and automotive production, such as rising fuel costs, could adversely impact our net sales and net income. We typically experience decreased sales and operating income during the first fiscal quarter of each year due to the impact of scheduled customer plant shut-downs in July and new model changeovers during that period.

Foreign Operations – We own and operate manufacturing operations in Mexico. As discussed below under “Investment in Joint Ventures and Majority Owned Subsidiaries” included in Notes to Financial Statements under Item 8 in this Form 10-K, we also have joint venture and majority owned investments in Mexico, Brazil, China and India. As these operations continue to expand, their success will depend, in part, on our and our partners’ ability to anticipate and effectively manage certain risks inherent in international operations, including: enforcing agreements and collecting receivables through certain foreign legal systems, payment cycles of foreign customers, compliance with foreign tax laws, general economic and political conditions in these countries and compliance with foreign laws and regulations. The success of these joint venture operations may be impacted by our partners’ ability to influence business decisions and therefore the operating results of the joint ventures could be adversely impacted. These influences, as well as conflicts or disagreements with our joint venture partners, could negatively impact the operations and financial results of our joint venture investments, which could have an adverse impact on our financial results. In addition, failure of our partners to be able to continue to fund their portion of the joint venture operations could have a material adverse effect on the financial condition and financial results of our joint venture investments, which could have a material adverse effect on our financial results. The joint venture investments in China generated losses in 2012 and 2013 due to relocation costs associated with moves to a new facility and start-up costs associated with a new product line. These relocation costs and start-up costs have been financed internally and externally by VAST China. Additionally, our VAST LLC joint ventures in Brazil and India continue to report losses due to the weak automotive build in those regions. The impact of any future planned capital expenditures or future expansion by VAST LLC in China, Brazil and India, may result in the need for additional future capital contributions to fund the operations of these joint venture investments.

Cross-border Trade Issues or Tariffs – Our business is impacted by international or cross-border trade, including the import and export of products and goods into and out of the United States and trade tensions among nations.  The shipping of goods across national borders is often more expensive and complicated than domestic shipping. Customs and duty procedures and reviews, including duty-free thresholds in various key markets, the application of tariffs, and security related governmental processes at international borders, may increase costs, discourage cross-border purchases, delay transit and create shipping uncertainties.  Further, uncertainties stemming from changes in U.S. trade policies in particular with European countries and China, tariffs and the reaction of other countries thereto, could have an adverse effect on our business and may adversely impact our results of operations or financial condition or reduce profitability on certain of our products.

Currency Exchange Rate Fluctuations – Our sales are denominated in U.S. dollars. We have manufacturing operations in Mexico, and as a result, a portion of our manufacturing costs are incurred in Mexican pesos. Therefore, fluctuations in the U.S. dollar/Mexican peso exchange rate may have a material effect on our profitability, cash flows, financial position, and may significantly affect the comparability of our results between financial periods. Any depreciation in the value of the U.S. dollar in relation to the value of the Mexican peso will adversely affect the cost of our Mexican operations when translated into U.S. dollars. Similarly, any appreciation in the value of the U.S. dollar in relation to the value of the Mexican peso will decrease the cost of our Mexican operations when translated into U.S. dollars.  

Sources of and Fluctuations in Market Prices of Raw Materials – Our primary raw materials are high-grade zinc, brass, nickel silver, aluminum, steel and plastic resins. These materials are generally available from a limited number of suppliers, but we have chosen to concentrate our sourcing with one primary vendor for each commodity or purchased component. We believe our sources of raw materials are reliable and adequate for our needs. However, the development of future sourcing issues related to using existing or alternative raw materials and the global availability of these materials as well as significant fluctuations in the market prices of these materials may have an adverse effect on our financial results if the increased raw material costs cannot be recovered from our customers.

Given the significant financial impact on us relating to changes in the cost of our primary raw materials, commencing with fiscal 2008 and thereafter, we began quoting quarterly material price adjustments for changes in our zinc costs in our negotiations with our customers. Our success in obtaining these quarterly price adjustments in our customer contracts is dependent on separate negotiations with each customer. It is not a standard practice for our customers to include such price adjustments in their contracts. We have been successful in obtaining quarterly price adjustments in some of our customer contracts. However, we have not been successful in obtaining the adjustments with all of our customers.

13

Disruptions Due to Work Stoppages and Other Labor Matters – Our major customers and many of their suppliers have unionized work forces. Work stoppages or slow-downs experienced by our customers or their suppliers could result in slow-downs or closures of assembly plants where our products are included in assembled vehicles. For example, strikes by a critical supplier called by the United Auto Workers led to extended shut-downs of most of General Motors’ North American assembly plants in February 2008 and September 2019. A material work stoppage experienced by one or more of our customers could have an adverse effect on our business and our financial results. In addition, all production associates at our Milwaukee facility are unionized. A sixteen-day strike by these associates in June 2001 resulted in increased costs as all salaried associates worked with additional outside resources to produce the components necessary to meet customer requirements. The current contract with our unionized associates is effective through September 17, 2021. We may encounter further labor disruption and we may also encounter unionization efforts in our other plants or other types of labor conflicts, any of which could have an adverse effect on our business and our financial results. Labor contracts between General Motors Company, Ford Motor Company and Fiat Chrysler Automobiles and their unionized associates under the United Auto Workers union expire in September 2023. In addition, their respective labor agreements with the Canadian auto workers union expire in September and October 2020. Labor disruptions encountered by our customers during the contract period could have an adverse effect on our business and our financial results.

Compliance Related to Regulations Related to Conflict Minerals – We are required to disclose the use of tin, tantalum, tungsten and gold (collectively, “conflict minerals”) mined from the Democratic Republic of the Congo and adjoining countries (the “covered countries”) if a conflict mineral(s) is necessary to the functionality of a product manufactured, or contracted to be manufactured, by us. We may determine, as part of our compliance efforts, that certain products or components we obtain from our suppliers could contain conflict minerals. If we are unable to conclude that all our products are free from conflict minerals originating from covered countries, this could have a negative impact on both our existing and future business, reputation and/or results of operations. We may also encounter challenges to satisfy customers who require that our products be certified as conflict free, which could place us at a competitive disadvantage if we are unable to substantiate such a claim. Compliance with these rules could also affect the sourcing and availability of some of the minerals used in the manufacture of products or components we obtain from our suppliers, including our ability to obtain products or components in sufficient quantities and/or at competitive prices to sell to our customers.

Environmental, Safety and Other Regulations – We are subject to Federal, state, local and foreign laws and other legal requirements related to the generation, storage, transport, treatment and disposal of materials as a result of our manufacturing and assembly operations. These laws include, among others, the Resource Conservation and Recovery Act (as amended), the Clean Air Act (as amended) and the Comprehensive Environmental Response, Compensation and Liability Act (as amended). We have an environmental management system that is ISO-14001 certified. We believe that our existing environmental management system is adequate for current and anticipated operations and we have no current plans for substantial capital expenditures in the environmental area. An environmental reserve was established in 1995 for estimated costs to remediate a site at our Milwaukee facility. The site was contaminated from a former above-ground solvent storage tank, located on the east side of the facility. The contamination occurred in 1985 and is being monitored in accordance with Federal, state and local requirements. We do not currently anticipate any material adverse impact on our results of operations, financial condition or competitive position as a result of compliance with Federal, state, local and foreign environmental laws or other related legal requirements. However, risk of environmental liability and changes associated with maintaining compliance with environmental laws is inherent in the nature of our business and there is no assurance that material liabilities or changes could not arise.

Highly Competitive Automotive Supply Industry – The automotive component supply industry is highly competitive. Some of our competitors are companies, or divisions or subsidiaries of companies, that are larger than STRATTEC and have greater financial, global and technology capabilities. Our products may not be able to compete successfully with the products of these other companies, which could result in loss of customers and, as a result, decreased sales and profitability. Some of our major customers have previously announced that they will be reducing their supply base. This could potentially result in the loss of these customers and consolidation within the supply base. The loss of any of our major customers could have a material adverse effect on our existing and future net sales and net income.

In addition, our competitive position in the North American automotive component supply industry could be adversely affected in the event that we are unsuccessful in making strategic investments, acquisitions or alliances or in establishing joint ventures that would enable us to expand globally, in particular, with the VAST Automotive Group and their ability to fund and service global vehicle platforms. We principally compete for new business at the beginning of the development of new models and upon the redesign of existing models by our major customers. New model development generally begins two to five years prior to the marketing of such new models to the public. The failure to obtain new business on new models or to retain or increase business on redesigned existing models could adversely affect our business and financial results. In addition, as a result of relatively long lead times for many of our components, it may be difficult in the short-term for us to obtain new sales to replace any unexpected decline in the sale of existing products. Finally, we may incur significant product development expense in preparing to meet anticipated customer requirements which may not be recovered.

14

Program Volume and Pricing Fluctuations – We incur costs and make capital expenditures for new program awards based upon certain estimates of production volumes over the anticipated program life for certain vehicles. While we attempt to establish the price of our products for variances in production volumes, if the actual production of certain vehicle models is significantly less than planned, our net sales and net income may be adversely affected. We cannot predict our customers’ demands for the products we supply either in the aggregate or for particular reporting periods.

Investments in Customer Program Specific Assets – We make investments in machinery and equipment used exclusively to manufacture products for specific customer programs. This machinery and equipment is capitalized and depreciated over the expected useful life of each respective asset. Therefore, the loss of any one of our major customers, the loss of specific vehicle models or the early cancellation of a vehicle model could result in impairment in the value of these assets which may have a material adverse effect on our financial results.

Warranty Claims – We are exposed to warranty claims in the event that our products fail to perform as expected, and we may be required to participate in the repair costs incurred by our customers for such products. Our largest customers have recently extended and/or expanded their warranty protection for their vehicles. Other automotive OEMs have similarly extended and/or expanded their warranty programs. We are engaged in ongoing discussions with our customers regarding warranty information and potential claims. The results of these discussions could result in additional warranty charges/claims in future periods. Depending on the nature of and the volume of vehicles involved in the potential warranty claims, these charges could be material to our financial statements. The extended and/or expanded warranty trend may also result in higher cost recovery claims by OEMs from suppliers whose products incur a higher rate of warranty claims above an OEM derived nominal level. Prior to fiscal 2010, we had experienced relatively low warranty charges from our customers due to our commercial arrangements and improvements in the quality, reliability and durability of our products. Due to our largest customers’ extension and/or expansion of their warranty protection programs and demands for higher warranty cost sharing arrangements from their suppliers in their terms and conditions of purchase, including from STRATTEC, we increased our provision to cover warranty exposures since fiscal year 2010. In 2015 and 2018, our increased warranty provision was the result of various known or expected customer warranty issues outstanding and estimated future warranty costs to be incurred as of June 2015 and June 2018, respectively, for which amounts were reasonably estimable. As additional information becomes available, actual results may differ from recorded estimates. If our customers demand higher warranty-related cost recoveries, or if our products fail to perform as expected, it could have a material adverse impact on our results of operations and financial condition.  

Cyber Vulnerability – Cyber attacks or security breaches could compromise confidential, business critical information, cause a disruption in our operations or harm our reputation. While we have a cyber security monitoring program, a significant cyber attack could result in loss of critical business information and/or could negatively impact our operations, any of which could have a negative impact on our financial results.

Income Taxes – We are a U.S.-based multinational company subject to tax in multiple U.S. and foreign tax jurisdictions. Significant judgment is required in determining our global provision for income taxes, deferred tax assets or liabilities and in evaluating our tax positions on a worldwide basis. While we believe our tax positions are consistent with the tax laws in the jurisdictions in which we conduct our business, it is possible that these positions may be overturned by jurisdictional tax authorities, which may have a significant impact on our global provision for income taxes. Tax laws are dynamic and subject to change as new laws are passed and new interpretations of these laws are issued or applied. We are also subject to ongoing tax audits. These audits can involve complex issues, which may require an extended period of time to resolve and can be highly subjective. Tax authorities may disagree with certain tax reporting positions taken by us and, as a result, assess additional taxes against us. We regularly assess the likely outcomes of these audits in order to determine the appropriateness of our tax provision.

Qualified Personnel – Our business success depends, to a significant degree, on attracting and retaining qualified personnel. Our ability to sustain and grow our business requires us to hire, retain, develop and motivate a highly skilled and diverse management team and workforce. These types of employees are in high demand and often have competing employment opportunities. The labor market for skilled employees is highly competitive and we may lose key employees or be forced to increase their compensation to retain these types of employees.  Failure to ensure that we have the leadership capacity with the necessary skill set and experience could impede our ability to deliver our growth objectives and execute our strategic plan. Organizational and reporting changes resulting from any future leadership transition or corporate initiatives could result in increased turnover. Additionally, any unplanned turnover or inability to attract and retain key employees could have a negative effect on our results of operations, including by significantly increasing our recruitment, training and other related employee costs.  The loss of key personnel, or the failure to attract qualified personnel, could have a material adverse effect on our business, financial condition or results of operations.

Credit Facilities – Historically, from time to time we have relied on our existing credit facilities to provide us with adequate working capital to operate our business and fund our capital expenditures, including our expansion initiatives.  We cannot provide assurance that we will be able to refinance, extend the maturity of, or otherwise amend the terms of our existing credit facilities, or that any refinancing, extension, or amendment will be on terms favorable to us or even on commercially reasonable terms. If our lenders reduce or terminate our access to amounts under our credit facilities, we may not have sufficient capital to fund our working capital needs and/or we may need to secure additional capital or financing to fund our working capital requirements or to repay

15

outstanding debt under our credit facilities.  Moreover, new credit facilities resulting from any refinancing of our existing facilities could have a significantly higher rate of interest and greater borrowing costs than our existing facilities. We can make no assurance that we will be successful in ensuring our availability of amounts under our credit facilities or in connection with raising additional capital and that any amount, if raised, will be sufficient to meet our cash flow requirements.  If we are not able to maintain our borrowing availability under our credit facilities and/or raise additional capital when needed, we may be forced to sharply curtail our efforts to manufacture and promote the sale of our products or to curtail our operations.

There can be no assurance that the financial terms or covenants of any new credit facility will be the same or as favorable as those under our existing facilities. Additionally, our ability to complete a refinancing of our existing credit facilities prior to their respective maturities is subject to a number of conditions beyond our control. For example, if a disruption in the financial markets were to occur at the time that we intended to refinance our credit facilities, we might be restricted in our ability to access the credit lines. The restrictive covenants in any such new credit facility may limit our ability to engage in acts that may be in our best long term interests.  A breach of any of these types of restrictive covenants in our credit facilities could result in a default under these facilities.  If a default occurs, the lenders under our credit facilities may elect to declare all outstanding borrowings, together with accrued interest, to be immediately due and payable, to terminate any commitments they have to provide further borrowings and to exercise any other rights they have under the facilities or applicable law.

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

ITEM 2. PROPERTIES

We have four manufacturing plants, one warehouse, and one sales office. These facilities are described as follows:

ITEM 3. LEGAL PROCEEDINGS

In the normal course of business we may be involved in various legal proceedings from time to time. We do not believe we are currently involved in any claim, action or proceeding the ultimate disposition of which would have a material adverse effect on our financial statements.

ITEM 4. MINE SAFETY DISCLOSURES

None.

16

PART II

ITEM 5.   MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Our common stock is traded on the NASDAQ Global Market under the symbol “STRT.”

Registered shareholders of record at June 28, 2020, were 1,040.

The Company’s Board of Directors authorized a stock repurchase program on October 16, 1996, and the program was publicly announced on October 17, 1996.  Since inception of the stock repurchase program, the Board of Directors has periodically increased the number of shares authorized for repurchase under the program.  At June 28, 2020, the number of shares of the Company’s common stock authorized for repurchase under the program totaled 3,839,395.  The program currently authorizes the repurchase of the Company’s common stock from time to time, directly or through brokers or agents, and has no expiration date.  Over the life of the repurchase program through June 28, 2020, a total of 3,655,322 shares have been repurchased at a cost of approximately $136.4 million.  No shares were repurchased during the year ended June 28, 2020.

ITEM 6.   SELECTED FINANCIAL DATA

The financial data for each period presented below reflects the consolidated results of STRATTEC SECURITY CORPORATION, its wholly owned Mexican subsidiary and its majority owned subsidiaries. Fiscal years 2016 and 2017 have been retrospectively adjusted for the adoption of an update to the accounting guidance for the presentation of net periodic pension cost and net periodic postretirement benefit cost which requires the service cost component of net periodic benefit cost to be reported in the same line items as other compensation costs arising from services rendered by the pertinent employees during the applicable period while remaining components of net periodic benefit cost are required to be presented separately outside a subtotal of income from operations. The information below should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and the Financial Statements and Notes thereto included elsewhere herein. The following data are in thousands of dollars except per share amounts.

17

ITEM 7.   MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following Discussion and Analysis should be read in conjunction with STRATTEC SECURITY CORPORATION’s accompanying Financial Statements and Notes thereto included in this Form 10-K. Unless otherwise indicated, all references to years or quarters refer to fiscal years or fiscal quarters of STRATTEC.

Executive Overview

Historically, a significant portion of our total net sales have been to domestic automotive OEMs (General Motors, Ford and Fiat Chrysler). During the past two decades these customers lost North American market share to the New Domestic automotive manufacturers (primarily the Japanese and Korean automotive manufacturers). In addition to our dependence on our customers’ maintaining their market share, our financial performance depends in large part on conditions in the overall automotive industry, which in turn, are dependent upon the U.S. and global economies. During fiscal years 2020 and 2019, the above domestic automotive OEMs together represented 62 percent and 60 percent, respectively, of our total net sales.

During fiscal years 2020 and 2019, we experienced stronger sales demand for our components from our major North American customers noted above as it relates to light trucks and both sport utility and car based utility vehicles in comparison to passenger cars, which was likely influenced by lower gas prices and customer preferences. If gas prices continue to remain flat or slightly higher over the next several years, we anticipate this consumer buying trend will continue, which is approximately 70 percent light trucks and sport utility vehicles in comparison to 30 percent passenger car vehicle purchases today. During the last 3-5 years our major customers General Motors, Ford and Fiat Chrysler eliminated passenger car production on several models in North America in anticipation to improve their overall profitability going forward.

Fiscal 2020 net sales were $385 million compared to $487 million in 2019. The reduced sales in fiscal year 2020 was attributed to the General Motors labor strike with the United Auto Workers in September and October 2019 which reduced net sales to General Motors by approximately $10 million and as a result of the COVID-19 pandemic. During March, April and May 2020, the North American OEM assembly plant operations were shut down for the COVID-19 pandemic reducing our net sales to our customers by approximately $78 million during that period. Net loss attributable to STRATTEC for fiscal 2020 was $7.6 million primarily attributed to the lost net sales previously described above. In response to the COVID -19 pandemic, the Company implemented temporary layoffs of production workers in our Milwaukee, WI and Mexico plant operations, reduced the US Salaried workforce by ten percent, reduced salaried working hours by ten percent, allowed remote working from home, significantly reduced nonessential operating costs, delayed capital expenditures and temporarily suspended the quarterly cash dividend to preserve cash flow during the fourth quarter of fiscal year 2020. In addition, during the fourth quarter the Company produced additional finished goods inventory in anticipation of our OEM customers pipeline fill to their dealers once vehicle production began starting up in June, 2020. Also, the Mexican Government has continued to limit our operating capacity to restart production since June 2020 due to COVID -19. Net Loss attributable to STRATTEC in fiscal 2019 was $17.0 million (which included non-cash pension settlement and compensation expense charges of approximately $28.0, net of tax relating to termination our defined pension benefit plan which is described in more detail below).

As described in "Retirement Plans and Postretirement Costs" in the Notes to Financial Statements under Item 8 in this Form 10-K, our Board of Directors approved the termination of the STRATTEC qualified, noncontributory defined benefit pension plan. During our fiscal 2019, we completed a substantial portion of the termination by (1) making distributions from the qualified pension plan trust to participants electing lump sum distributions and (2) entering into an agreement with an insurance company whereby we sold, through a series of annuity contracts, our remaining obligations under the qualified pension plan and, therefore, settled the remaining obligations under this plan with use of funds remaining in the plan. No additional cash contributions to the pension trust were required from STRATTEC to settle these pension obligations. In connection with those actions, we incurred a pre-tax settlement charge of $31.9 million during fiscal 2019. We also incurred a $4.2 million noncash compensation charge during fiscal 2019 related to the future transfer of the remaining excess pension plan assets to a STRATTEC defined contribution plan for subsequent pay-out to eligible participating STRATTEC employees based on a plan approved by the Board of Directors in June 2019. An additional $4.8 million non-cash compensation expense charge related to the final transfer and pay-out of the excess Qualified Pension Plan assets was recorded during fiscal 2020. With these final actions, we completed the full termination of the qualified pension plan during fiscal 2020 and removed significant financial risk associated with the pension liability from the Company’s overall financial position going forward.

As we look out into the future, the July 2020 projections from our third-party forecasting service indicate that North American light vehicle production will show a significant decline in the 2020 vehicle production build due to the COVID-19 pandemic and then increase and remain steady to flat production for the next four years. By model year, based on these projections we are expecting a 2020 build of 12.8 million vehicles, 15.1 million vehicles for 2021, 15.1 million vehicles for 2022, 15.5 million vehicles for 2023 and 15.8 million vehicles for 2024. These vehicle production estimates going forward were significantly reduced due to the impact of COVID-19. As part of this third party projection, the Ford Motor Company and General Motors are expected to experience flat vehicle production volumes in their production levels during this time period. Fiat Chrysler, however, is expected to slightly decrease production as they eliminate or reduce car production on certain models during this time horizon. Of course, all of these forecasts are subject to variability based on what happens in the overall North American and global economies, especially as it relates to the world wide status of the COVID-19 pandemic that may shut down our customers assembly facilities and supply chains in the foreseeable future, potential tariff enactment by the United States Government or other foreign countries, the current levels of employment, availability of consumer credit, home equity values, fluctuating fuel prices, changes in customer vehicle and option preferences, product quality issues, including related to recall and product warranty coverage issues, and other key factors that we believe could determine whether consumers can or will purchase new vehicles or particular brands.

18

Focus and Strategy Going Forward

STRATTEC’s long-term strategy is focused on maximizing long-term shareholder value by driving profitable growth. Our management believes productivity improvements and cost reductions are critical to our competitiveness, while enhancing the value we deliver to our customers. In order to accomplish this, we have been pursuing, and we intend to continue to pursue over the foreseeable future, the following objectives as summarized below:

We use several key performance indicators to gauge progress toward achieving these objectives. These indicators include net sales growth, operating margin improvement, return on capital employed and cash flow from operations.

Results of Operations

2020 Compared to 2019

Net Sales to each of our customers or customer groups in the current year and prior year were as follows (millions of dollars):

Sales to each of our customers or customer groups decreased in the current year as compared to the prior year. As discussed in our prior filings with the Securities and Exchange Commission, we were impacted in fiscal 2020 by the General Motors UAW strike, which reduced our net sales by approximately $10 million in the current year. Additionally, during the period late March 2020 through mid-June 2020, our OEM customers reduced production schedules and closed their assembly plants due to COVID-19.  The impact of these plant closures and resulting production schedule reductions reduced our net sales in the current year by approximately $78 million.

Direct material costs are the most significant component of our cost of goods sold and comprised $218.1 million or 62.3 percent of cost of goods sold in the current year compared to $280.5 million or 65.4 percent of cost of goods sold in the prior year. This dollar value decrease in our direct material costs of $62.4 million or 22.2 percent was due to decreased sales volumes in the current year as compared to the prior year and reduced scrap costs resulting from efforts to reduce nonconforming costs resulting from internal manufacturing process quality issues. The decrease in our direct material costs as a percentage of our cost of goods sold in the current year as compared to the prior year was due to reduced scrap costs and a reduction in sales of our power access products as a percentage of our consolidated sales. Power access products have a higher purchased content percentage as compared to our other products. Thus, the decreased sales mix of power access products between periods further reduced our direct material costs as a percentage of our cost of goods sold.

19

The remaining components of cost of goods sold consist of labor and overhead costs which decreased $16.9 million or 11.4 percent to $131.8 million in the current year from $148.7 million in the prior year as the variable portion of these costs decreased due to the reduction in sales volumes between years. Additionally, the decrease in labor and overhead costs in the current year as compared to the prior year was impacted by cost reduction initiatives implemented during our fiscal 2020 fourth quarter as a result of COVID-19 and the impact of a favorable Mexican peso to U.S. dollar exchange rate affecting our operations in Mexico. Cost reduction initiatives included temporary and permanent layoffs at our U.S. and Mexico locations, reductions in pay for our officers, reductions in working hours for most salaried associates, and a reduction in our U.S. salaried workforce. The U.S. dollar value of our Mexican operations was favorably impacted by approximately $2.4 million in the current year as compared to the prior year due to a favorable Mexican peso to U.S. dollar exchange rate between these annual periods. The average U.S. dollar / Mexican peso exchange rate increased to approximately 20.50 pesos to the dollar in the current year from approximately 19.34 pesos to the dollar in the prior year. These favorable impacts were partially offset by an increase in the Mexican minimum wage for our Mexican workforce, which was effective January 1, 2019 and resulted in higher costs during the six month period ended December 2019 as compared to the prior year period. Additionally, labor and overhead costs in both the current year and prior year periods included non-cash compensation expense charges related to the transfer of excess Qualified Pension Plan assets, as discussed above. These non-cash compensation expense charges increased labor and overhead costs by $3.0 million in the current year and $2.5 million in the prior year.

The decrease in gross profit dollars in the current year as compared to the prior year was attributed to the decrease in sales, partially offset by the decrease in cost of goods sold as discussed above. Gross profit as a percentage of net sales decreased between years due to the reduction in sales as discussed above, which resulted in under absorption of our fixed costs.

Engineering, Selling and Administrative Expenses in the current year and prior year were as follows:

Engineering, selling and administrative expenses decreased $3.1 million between years. Due to the impacts of COVID-19, during our fiscal 2020 fourth quarter, we implemented reductions in pay for our officers, reductions in working hours for most salaried associates, and a reduction in our U.S. salaried workforce, which reduced our 2020 engineering, selling, and administrative costs. These costs were further reduced by a reduction in expenditures for new product development costs associated with utilizing third party vendors for a portion of our development work. Additionally, Engineering, selling and administrative expenses in both the current year and prior year periods included non-cash compensation expense charges related to the transfer of excess Qualified Pension Plan assets, as discussed above. These non-cash compensation expense charges increased engineering, selling and administrative expense by $1.9 million in the current year and $1.7 million in the prior year.

Loss from operations in the current year was $8.7 million compared to income from operations of $10.6 million in the prior year. This change was the result of reduced sales, which were partially offset by a reduction in cost of goods sold and decreased engineering, selling and administrative expenses in the current year as compared to the prior year, all as discussed above.  

The equity (loss) earnings of joint ventures was comprised of the following in the current year and prior year (thousands of dollars):

20

Lower profitability from our Vehicle Access Systems Technology LLC (“VAST LLC”) joint ventures was due to lower profitability in our VAST China operation related to extended OEM customer plant shutdowns associated with the COVID-19 outbreak during the period January 2020 through March 2020 and higher development costs for new programs and startup costs associated with a new plant in Jingzhou, China, which we believe will give VAST added capacity, efficiencies, and a broader geographic footprint in the China market going forward. The current year equity loss of joint ventures for VAST LLC also included a $2 million impairment charge related to its Minda-VAST Access Systems joint venture in India. STRATTEC’s portion of this impairment charge for 2020 totaled $667,000. Our VAST LLC joint ventures in India and Brazil continue to report losses due to our limited amount of business in both regions as well as the impact of COVID-19. SAL LLC was dissolved during fiscal 2020. STRATTEC was not the primary beneficiary and did not control SAL LLC. Current year equity earnings of SAL LLC included a gain on dissolution of $342,000.

Included in other income (expense), net in the current year and prior year were the following items (thousands of dollars):

Foreign currency transaction gains and losses resulted from activity associated with foreign denominated assets held by our Mexican subsidiaries. The Rabbi Trust assets fund our amended and restated supplemental executive retirement plan. The investments held in the Trust are considered trading securities. We entered into the Mexican peso currency forward contracts during fiscal 2020 and 2019 to minimize earnings volatility resulting from changes in exchange rates affecting the U.S. dollar cost of our Mexican operations. Unrealized gains and losses on the peso forward contracts recognized as a result of mark-to-market adjustments as of June 28, 2020 may or may not be realized in future periods, depending on actual Mexican peso to U.S. dollar exchange rates experienced during the balance of the contract period. Pension and postretirement plan costs include the components of net periodic benefit cost other than the service cost component. During fiscal 2020, other miscellaneous income net includes $450,000 of  favorable valued added tax adjustments realized by our Mexican entities and $434,000 of experience gains from asset returns related to the termination of our Qualified Pension Plan as discussed under Retirement Plans and Postretirement Costs within our Notes to Financial Statements under Item 8 of this report on Form 10-K.

Our effective income tax rate for 2020 was 27.9 percent compared to 37.9 percent in 2019. During 2020, our effective tax rate was impacted by the carry-back of losses to tax years with a higher statutory tax rate. During 2019, our effective tax rate was impacted by a $372,000 benefit resulting from measurement period adjustments to the one-time transition tax on non-previously taxed post 1986 accumulated foreign earnings occurring as a result of the enactment of the Tax Cuts and Jobs Act of 2017.  Additionally, our income tax provision for each year 2020 and 2019 was affected by the non-controlling interest portion of our pre-tax income. The non-controlling interest impacts the effective tax rate as our ADAC-STRATTEC LLC and STRATTEC POWER ACCESS LLC entities are taxed as partnerships for U.S. tax purposes.

Liquidity and Capital Resources

Working Capital (millions of dollars)

21

Outstanding Receivable Balances from Major Customers

Our primary source of cash flow is from our major customers, which include Fiat Chrysler Automobiles LLC, General Motors Company and Ford Motor Company. As of the date of filing this Annual Report with the Securities and Exchange Commission, all of our customers are making payments on their outstanding accounts receivable in accordance with the payment terms included on their purchase orders. A summary of our outstanding receivable balances from our major customers as of June 28, 2020 was as follows (millions of dollars):

The reduction in accounts receivable balances during the current year reflected reduced sales levels from the end of March 2020 through June 2020 as compared to our fiscal 2019 fourth quarter, which reduction was primarily due to our OEM customers reducing production schedules and closing their assembly plants, which reduced orders for our products, due to the COVID-19 outbreak.

Cash Balances in Mexico

We earn a portion of our operating income in Mexico. As of June 28, 2020, $3.4 million of our $11.8 million cash and cash equivalents balance was held in Mexico. These funds are available for repatriation as deemed necessary.

Cash Flow Analysis

The decrease in cash provided by operating activities between 2019 and 2020 was due to a reduction in operating income as previously discussed. The reduction in operating income was partially offset by a net reduction in working capital requirements between the two years of $9.6 million, with the net decrease in our working capital requirements being made up of the following working capital changes (millions of dollars):

The year over year change in the accounts receivable balances is the result of the amount and timing of sales during each year. The reduction in accounts receivable balances during the current year reflected reduced sales levels from the end of March 2020 through June 2020 as compared to the end of our prior year, which reduction was primarily due to our OEM customers reducing production schedules and closing their assembly plants, which reduced orders for our products, due to the COVID-19 outbreak. The increase in accounts receivable balances during the prior year reflected increased sales levels toward the end June 2019 as compared to the end of June 2018. The year over year change in inventory reflected an increase in inventory balances during the current year due to an inventory build-up resulting from our OEM customers reducing production schedules and closing their assembly plants due to COVID-19. The year over year change in customer tooling balances, which consisted of costs incurred for the development of tooling that will be directly reimbursed by the customer whose parts are produced from the tool, was the result of the timing of tooling development spending required to meet customer production requirements and related billings for customer reimbursements. The year over year change in other assets was the result of a decrease in the income tax recoverable balance in 2019, which changes were based on the required income tax provision, the timing and amounts of Federal, state and foreign tax payments made, and the timing of the utilization of foreign tax credits and research and development tax credits. The year over year change in accounts payable and accrued liability balances reflected an increase in working capital requirements during the current year and a reduction in working capital

22

requirements during the prior year. The current year increase in working capital requirements resulted from a decrease in account payable and accrued liability balances, which resulted from a reduction in purchases from our vendors due to the impact of COVID-19. Current year payments to our vendors were based on our normal payment terms. The prior year reduction in working capital requirements was the result of an increase in accounts payable and accrual balances, which resulted from the timing of purchases and payments with our vendors based on our normal payment terms.

Net cash used by investing activities of $12.3 million during 2020 and $17.6 million during 2019 included capital expenditures of $12.4 million and $17.5 million, respectively. Capital expenditures during each year were made in support of requirements for new product programs and the upgrade and replacement of existing equipment. Net cash used by investing activities during 2019 also included an investment in our VAST LLC joint venture of $200,000. The investment was made for the purpose of funding general operating expenses for Sistema de Acesso Veicular Ltda, our Brazilian joint venture.

Net cash used in financing activities of $9.0 million during 2020 included repayments of borrowings under credit facilities of $15.0 million, $1.6 million of regular quarterly dividend payments to shareholders and $980,000 of dividend payments to non-controlling interests in our subsidiaries, partially offset by $8 million in additional borrowings under credit facilities as well as $560,000 received for the exercise of stock options under our stock incentive plan and purchases under our employee stock purchase plan. Net cash used in financing activities of $12.2 million during 2019 included repayments of borrowings under credit facilities of $14.0 million, $2.1 million of regular quarterly dividend payments to shareholders and $1.4 million of dividend payments to non-controlling interests in our subsidiaries, partially offset by $5 million in additional borrowings under credit facilities as well as $271,000 received for the exercise of stock options under our stock incentive plan and purchases under our employee stock purchase plan.

Dividends

On May 13, 2020, our Board of Directors took action to temporarily suspend payment of our quarterly dividend for the foreseeable future in order to conserve cash as a result of the economic downturn caused by COVID-19. During the first nine months of fiscal 2020, approximately $1.6 million of cash dividends were paid to our shareholders.

VAST LLC Cash Requirements

VAST China maintains debt facilities to cover operating and capital requirements. If COVID-19 continues in China causing their operations to be unprofitable, VAST China may not be able to renew working capital loans, which may require a capital call from the VAST partners. No capital contributions were made to VAST LLC during 2020. During 2019, capital contributions totaling $600,000 were made to VAST LLC for purposes of funding operations in Brazil. STRATTEC’s portion of the capital contributions totaled $200,000. We anticipate the Brazilian entity will require a capital contribution of approximately $375,000 collectively by all VAST partners to fund operations during fiscal 2021. STRATTEC’s portion of the capital contributions is anticipated to be $125,000. Due to Minda-VAST Access Systems recently experiencing losses and being shut-down for an extended period due to the COVID-19 outbreak, future capital contributions by the VAST partners, including STRATTEC, may be required during fiscal 2021.

Future Capital Expenditures

We anticipate capital expenditures will be approximately $12 million in fiscal 2021 in support of requirements for new product programs and the upgrade and replacement of existing equipment.

Stock Repurchase Program

Our Board of Directors has authorized a stock repurchase program to buy back outstanding shares of our common stock. Shares authorized for buy back under the program totaled 3,839,395 at June 28, 2020. A total of 3,655,322 shares have been repurchased over the life of the program through June 28, 2020, at a cost of approximately $136.4 million. No shares were repurchased during fiscal 2020 or 2019. Additional repurchases may occur from time to time and are expected to continue to be funded by cash flow from operations and current cash balances. At this time, we anticipate minimal or no stock repurchase activity in fiscal year 2021.

Credit Facilities

STRATTEC has a $40 million secured revolving credit facility (the “STRATTEC Credit Facility”) with BMO Harris Bank N.A. ADAC-STRATTEC LLC has a $25 million secured revolving credit facility (the “ADAC-STRATTEC Credit Facility”) with BMO Harris Bank N.A., which is guaranteed by STRATTEC. The credit facilities both expire August 1, 2022. Borrowings under either credit facility are secured by our U.S. cash balances, accounts receivable, inventory, and fixed assets located in the U.S. Interest on borrowings under the STRATTEC Credit Facility and interest on borrowings under the ADAC-STRATTEC Credit Facility prior to December 31, 2018 were at varying rates based, at our option, on the London Interbank Offering Rate (“LIBOR”) plus 1.0 percent or the bank’s prime rate. Effective December 31, 2018 and thereafter, interest on borrowings under the ADAC-STRATTEC Credit Facility is at varying rates based, at our option, on LIBOR plus 1.25 percent or the bank’s prime rate. Both credit facilities contain a

23

restrictive financial covenant that requires the applicable borrower to maintain a minimum net worth level. As of June 28, 2020, we were in compliance with all financial covenants required by these credit facilities. Outstanding borrowings under the STRATTEC Credit Facility totaled $18 million at both June 28, 2020 and June 30, 2019. The average outstanding borrowings and weighted average interest rate on the STRATTEC Credit Facility loans were approximately $13.8 million and 2.6 percent, respectively, during 2020. The average outstanding borrowings and weighted average interest rate on the STRATTEC Credit Facility loans were approximately $21.2 million and 3.3 percent, respectively, during 2019. Outstanding borrowings under the ADAC-STRATTEC Credit Facility totaled $17 million at June 28, 2020 and $24.0 million at June 30, 2019. The average outstanding borrowings and weighted average interest rate on the ADAC-STRATTEC Credit Facility loans were approximately $19.1 million and 2.9 percent, respectively, during 2020. The average outstanding borrowings and weighted average interest rate on the ADAC-STRATTEC Credit Facility loans were approximately $25.9 million and 3.4 percent, respectively, during 2019. We believe that the credit facilities are adequate, along with existing cash flows from operations, to meet our anticipated capital expenditure, working capital, dividend, and operating expenditure requirements.

Inflation and Other Changes in Prices

Over the past several years, we have been impacted by rising health care costs, which have increased our cost of associate medical coverage. A portion of these increases have been offset by plan design changes and associate wellness initiatives. We have also been impacted by increases in the market price of zinc and brass and inflation in Mexico, which impacts the U. S. dollar costs of our Mexican operations. We have negotiated raw material price adjustment clauses with certain, but not all, of our customers to offset some of the market price fluctuations in the cost of zinc. We own and operate manufacturing operations in Mexico.  As a result, a portion of our manufacturing costs are incurred in Mexican pesos. We have from time to time entered into contracts with Bank of Montreal that provide for bi-weekly and monthly Mexican peso currency forward contracts for a portion of our estimated peso denominated operating costs to minimize our earnings volatility resulting from changes in exchange rates affecting the U.S. dollar cost of our Mexican operations. Refer to the discussion of Derivative Instruments under Organization and Summary of Significant Accounting Policies included in the Notes to Financial Statements included as part of Item 8 within this Form 10-K.

Joint Ventures and Majority Owned Subsidiaries

Refer to the discussion of Investment in Joint Ventures and Majority Owned Subsidiaries and discussion of Equity (Loss) Earnings of Joint Ventures included in the Notes to Financial Statements included within this Form 10-K.

Critical Accounting Policies

We believe the following represents our critical accounting policies:

Liability for Uncertain Tax Positions – We are subject to income taxation in many jurisdictions around the world. Significant management judgment is required in the accounting for income tax contingencies because the outcomes are often difficult to determine. We are required to measure and recognize uncertain tax positions that we have taken or expect to take in our income tax returns. The benefit of an uncertain tax position can only be recognized in the financial statements if management concludes that it is more likely than not that the position will be sustained with the tax authorities. For a position that is likely to be sustained, the benefit recognized in the financial statements is measured at the largest amount that is greater than 50 percent likely of being realized. A reserve is established for the difference between a position taken in an income tax return and the amount recognized in the financial statements. Refer to the discussion of Income Taxes included in the Notes to Financial Statements included as part of Item 8 within this Form 10-K.

Other Reserves – We have reserves such as a warranty reserve and an excess and obsolete inventory reserve. These reserves require the use of estimates and judgment with regard to risk exposure, ultimate liability and net realizable value.

Warranty Reserve – We have a warranty liability recorded related to our exposure to warranty claims in the event our products fail to perform as expected, and we may be required to participate in the repair costs incurred by our customers for such products. The recorded warranty liability balance involves judgment and estimates. Our liability estimate is based on an analysis of historical warranty data as well as current trends and information, including our customers’ recent extension or expansion of their warranty programs. Actual warranty costs might differ from estimates due to the level of actual claims varying from our claims experience and estimates and final negotiations and settlements reached with our customers. Therefore, future actual claims experience could result in changes in our estimates of the required liability. Refer to the discussion of Warranty Reserve under Organization and Summary of Significant Accounting Policies included in the Notes to Financial Statements included as part of Item 8 within this Form 10-K.

24

Excess and Obsolete Inventory Reserve – We record a reserve for excess and obsolete inventory based on historical and estimated future demand and market conditions. The reserve level is determined by comparing inventory levels of individual materials and parts to historical usage and estimated future sales by analyzing the age of the inventory in order to identify specific material and parts that are unlikely to be sold. Technical obsolescence and other known factors are also considered in evaluating the reserve level. Actual future write-offs of inventory may differ from estimates and calculations used to determine reserve levels due to changes in customer demand, changes in technology and other factors. Refer to the discussion of Inventories under Organization and Summary of Significant Accounting Policies included in the Notes to Financial Statements included as part of Item 8 within this Form 10-K.

We believe the reserves discussed above are estimated using consistent and appropriate methods. However, changes to the assumptions could materially affect the recorded reserves.

New Accounting Standards

Refer to the discussion of New Accounting Standards under Organization and Summary of Significant Accounting Policies included in the Notes to Financial Statements included as part of Item 8 within this Form 10-K.

ITEM 7A.   QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Not applicable.

25

ITEM 8.   FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

26

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the shareholders and the Board of Directors of STRATTEC SECURITY CORPORATION

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of STRATTEC SECURITY CORPORATION and subsidiaries (the "Company") as of June 28, 2020 and June 30, 2019, the related consolidated statements of loss and comprehensive (loss) income, shareholders’ equity, and cash flows, for each of the two years in the period ended June 28, 2020, and the related notes (collectively referred to as the "financial statements"). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of June 28, 2020 and June 30, 2019, and the results of its operations and its cash flows for each of the two years in the period ended June 28, 2020, in conformity with accounting principles generally accepted in the United States of America.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company's internal control over financial reporting as of June 28, 2020, based on criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated September 3, 2020, expressed an unqualified opinion on the Company's internal control over financial reporting.

Change in Accounting Principle

As discussed in the notes to the financial statements, the Company changed its method of accounting for leases in the year ended June 28, 2020 due to the adoption of Accounting Standard Update 2016-02, Leases, using the modified retrospective method.

Basis for Opinion

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

/s/ Deloitte & Touche LLP

Milwaukee, Wisconsin  

September 3, 2020

We have served as the Company's auditor since 2010.

27

CONSOLIDATED STATEMENTS OF LOSS AND COMPREHENSIVE (LOSS) INCOME

(IN THOUSANDS, EXCEPT PER SHARE AMOUNTS)

The accompanying Notes to Financial Statements are an integral part of these Consolidated Statements of Loss and Comprehensive (Loss) Income.

28

CONSOLIDATED BALANCE SHEETS

(IN THOUSANDS, EXCEPT SHARE AMOUNTS AND PER SHARE AMOUNTS)

The accompanying Notes to Financial Statements are an integral part of these Consolidated Balance Sheets.

29

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY

(IN THOUSANDS, EXCEPT PER SHARE AMOUNTS)