strt-10k_20180701.htm

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C.  20549

 

FORM 10-K

 

[ x ]Annual report pursuant to Section 13 or 15(d) of the Securities Exchange Act of  1934

For the fiscal year ended July 1, 2018.

 

[    ]Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

 

Commission File Number 0-25150

 

STRATTEC SECURITY CORPORATION

(Exact name of registrant as specified in its charter)

Wisconsin

39-1804239

(State of Incorporation)

(I.R.S. Employer Identification No.)

 

3333 West Good Hope Road, Milwaukee, WI  53209

(Address of principal executive offices)

 

(414) 247-3333

(Registrant’s telephone number, including area code)

 

Securities registered pursuant to Section 12(b) of the Act:

Title of each class

Name of exchange on which registered

Common Stock, $.01 par value

The NASDAQ Global Stock Market

 

Securities registered pursuant to Section 12(g) of the Act:

None

(Title of Class)

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  [   ]Yes   [ x ]No


Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.           [   ]Yes   [ x ]No

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  [ x ]Yes   [  ]No

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  [ x ]Yes   [  ]No

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment of this Form 10-K.           [ X ]

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer,  a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large accelerated filer [   ]     Accelerated filer [ x ]     

Non-accelerated filer [   ] (do not check if a smaller reporting company)Smaller Reporting Company [  ]      Emerging Growth Company [  ]  

1

 


If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. [   ]

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).      [   ]Yes   [ x ]No

 

The aggregate market value of the voting Common Stock held by non-affiliates of the registrant as of December 29, 2017 (the last business day immediately preceding the Registrant's most recently completed fiscal second quarter), was approximately $155,324,000 (based upon the last reported sale price of the Common Stock at December 29, 2017 on the NASDAQ Global Market).  Shares of common stock held by any executive officer or director of the registrant have been excluded from this computation because such persons may be deemed to be affiliates.  This determination of affiliate status is not a conclusive determination for other purposes.


On August 3, 2018, there were outstanding 3,704,565 shares of the Registrant's $.01 par value Common Stock (which includes any unvested restricted shares previously awarded).

 

Documents Incorporated by Reference

 

 

Part of the Form 10-K

Document

 

into which incorporated

Portions of the Annual Report to Shareholders for the

fiscal year ended July 1, 2018

 

I, II, IV

 

 

 

Portions of the Proxy Statement dated on or about September 6, 2018, for the

Annual Meeting of Shareholders to be held on October 9, 2018.

 

III

 

PROSPECTIVE INFORMATION

A number of the matters and subject areas discussed in this Form 10-K as well as in portions of the Company’s 2018 Annual Report to Shareholders and the Company’s Proxy Statement, dated September 6, 2018, which are incorporated herein by reference, contain “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995.  These statements may be identified by the use of forward-looking words or phrases such as “anticipate,” “believe,” “would,” “expect,” “intend,” “may,” “planned,” “potential,” “should,” “will” and “could,” or the negative of these terms or words of similar meaning.  These statements include expected future financial results, product offerings, global expansion, liquidity needs, financing ability, planned capital expenditures, management’s or the Company’s expectations and beliefs, and similar matters discussed, or otherwise incorporated herein by reference, in this Form 10-K.  The discussions of such matters and subject areas are qualified by the inherent risks and uncertainties surrounding future expectations generally, and also may materially differ from the Company’s actual future experience.  

The Company’s business, operations and financial performance are subject to certain risks and uncertainties, which could result in material differences in actual results from the Company’s current expectations.  These risks and uncertainties include, but are not limited to, general economic conditions, in particular relating to the automotive industry, consumer demand for the Company’s and its customers’ products, competitive and technological developments, customer purchasing actions, changes in warranty provisions and customers’ recall policies, foreign currency fluctuations, fluctuations in costs of operations (including fluctuations in the cost of raw materials), the volume and scope of product returns and warranty claims, uncertainties stemming from U.S. trade policies, tariffs and reactions to same from foreign countries and other matters described under “Risk Factors” in the Management’s Discussion and Analysis section of the Company’s 2018 Annual Report to Shareholders, which is incorporated herein by reference in Part I, Item 1A of this report and in the Company’s other filings with the Securities and Exchange Commission.

Shareholders, potential investors and other readers are urged to consider these factors carefully in evaluating the forward-looking statements and are cautioned not to place undue reliance on such forward-looking statements.  The forward-looking statements made herein are only made as of the date of this Form 10-K and the Company undertakes no obligation to publicly update such forward-looking statements to reflect subsequent events or circumstances occurring after the date of this Form 10-K.


2

 


PART I

 

Item 1.  Business

The information set forth under “Company Description” which appears on pages 5 through 12 of the Company’s 2018 Annual Report to Shareholders is incorporated herein by reference.  For information as to export sales, see the information set forth under “Notes to Financial Statements-Export Sales” included on page 57 of the Company’s 2018 Annual Report to Shareholders, which is incorporated herein by reference.

 

Emerging Technologies

Automotive vehicle access systems, which are both theft deterrent and consumer friendly, are trending toward electro-mechanical devices.  Electronic companies are developing user identification systems such as bio-systems, card holder (transmitter) systems, etc., while mechanical locks, keys, housings, and latches are evolving to accommodate electronics. The Company believes it is positioning itself as a vehicle access control supplier by building its product, engineering and manufacturing expertise in the required electro-mechanical products, which include vehicle access latches, keys with remote entry electronic systems, and ignition interface systems with passive start capabilities. As the automotive industry continues developing various levels of autonomous vehicles, we believe that we are well positioned to continue the development and incorporation of power sliding doors, power end gates and other consumer convenience features into these types of vehicles.

 

These technologies benefit the Company by increasing its potential customer base as a Tier 2 supplier while maintaining the Company’s Tier 1 status on some product lines and by adding additional product line availability.

 

Sources and Availability of Raw Materials

The Company’s primary raw materials are high-grade zinc, brass, nickel silver, steel, aluminum and plastic resins. These materials are generally available from a number of suppliers, but the Company has chosen to concentrate its sourcing with one primary vendor for each commodity. The Company believes its sources for raw materials are very reliable and adequate for its needs. The Company has not experienced any significant long term supply problems in its operations and does not anticipate any significant supply problems in the foreseeable future.  See further discussion under “Risk Factors-Sources of and Fluctuations in Market Prices of Raw Materials” included on page 29 of the Company’s 2018 Annual Report to Shareholders, which is incorporated herein by reference.

 

Patents, Trademarks and Other Intellectual Property

The Company believes that the success of its business will not only result from the technical competence, creativity and marketing abilities of its employees but also from the protection of its intellectual property through patents, trademarks and copyrights. As part of its ongoing research, development and manufacturing activities, the Company has a policy of seeking patents on new products, processes and improvements when appropriate.

 

Although, in the aggregate, the intellectual property discussed herein are of considerable importance to the manufacturing and marketing of many of its access control products, the Company does not consider any single patent or trademark or group of related patents or trademarks to be material to its business as a whole, except for the STRATTEC and STRATTEC with logo trademarks.

 

The Company also relies upon trade secret protection for its confidential and proprietary information. The Company maintains confidentiality agreements with its key executives. In addition, the Company enters into confidentiality agreements with selected suppliers, consultants and employees as appropriate to evaluate new products or business relationships pertinent to the success of the Company. However, there can be no assurance that others will not independently obtain similar information and techniques or otherwise gain access to the Company's trade secrets or that the Company can effectively protect its trade secrets.

 

Dependence Upon Significant Customers

A very significant portion of the Company’s annual sales are to General Motors Company, Ford Motor Company, and Fiat Chrysler Automobiles.  These three customers accounted for approximately 59 percent of the Company’s net sales in 2018, 60 percent of the Company’s net sales in 2017 and 63 percent of the Company’s net sales in 2016.  Further information regarding sales to the Company’s largest customers is set forth under the caption “Risk Factors - Loss of Significant Customers, Vehicle Content, Vehicle Models and Market Share” and “Risk Factors – Production Slowdowns by Customers” included on page 27 of the Company’s 2018 Annual Report to Shareholders and “Notes to Financial Statements-Sales and Receivable Concentration” included on page 57 of the Company’s 2018 Annual Report to Shareholders, all of which are incorporated herein by reference.  

 


3

 


The products sold to these customers are model specific, fitting only certain defined applications. Consequently, the Company is highly dependent on its major customers for their business, and on these customers' ability to produce and sell vehicles which utilize the Company's products. The Company has enjoyed good relationships with General Motors Company, Fiat Chrysler Automobiles, Ford Motor Company and other customers in the past, and expects to continue to do so in the future. However, a significant change in the purchasing practices of, or a significant loss of volume from, one or more of these customers could have a detrimental effect on the Company's financial performance.  We cannot provide any assurance that any lost sales volume could be replaced despite our historical relationships with our customers.

 

Sales and Marketing

The Company provides its customers with engineered access control products including locksets, fobs, push button ignition systems, steering column lock housings, seatback and secondary latches, power sliding door systems, power liftgate systems, power decklids, door handles, door handle components and trim and other access products which are unique to specific vehicles. Any given vehicle will typically take 1 to 3 years of development and engineering design time prior to being offered to the public. The access control products are designed concurrently with the vehicle. Therefore, commitment to the Company as the production source for such products and components occurs 1 to 3 years prior to the start of production for such components.  The Company employs an engineering staff that assists in providing design and technical solutions to its customers.  The Company believes that its engineering expertise is a competitive advantage and contributes toward its strong market position in its industry.  For example, the Company believes it regularly provides innovative design proposals for its product offerings to its customers that will improve customer access, vehicle security system quality, theft deterrence and system cost.

 

The typical process used by automotive manufacturers in selecting a supplier for access control products is to offer the business opportunity to the Company and several of the Company's competitors. Each competitor will pursue the opportunity, doing its best to provide the customer with the most attractive proposal. Price pressure is strong during this process but once an agreement is reached, a commitment is made for each year of the product program. Typically, price reductions resulting from productivity improvement by the Company over the life of the product program are included in the contract and are estimated in evaluating each of these opportunities by the Company. A blanket purchase order, a contract indicating a specified part will be supplied at a specified price during a defined time period, is issued by customers for each model year.  Production quantity releases or quantity commitments are made to that purchase order for weekly deliveries to the customer. As a consequence and because the Company is a "Just-in-Time" supplier to the automotive industry, it does not maintain a backlog of orders in the classic sense for future production and shipment and, accordingly, it is unable to provide a meaningful backlog comparison from year to year.

 

Competition

The Company competes with domestic and foreign-based competitors on the basis of custom product design, engineering support, quality, delivery and price.  While the number of direct competitors is currently relatively small, the automotive manufacturers actively encourage competition between potential suppliers. The Company has a large share of the North American market for its access control products because of its ability to provide optimal value, which is a beneficial combination of price, quality, technical support, program management, innovation and aftermarket support.  In order to reduce access control product production costs while still offering a wide range of technical support, the Company utilizes assembly operations and certain light manufacturing operations in Mexico, which results in lower labor costs as compared to the United States.

 

As locks and keys become more sophisticated and involve additional electronics, competitors with specific electronic expertise may emerge to challenge the Company.  To address this, the Company has in recent years strengthened its electrical engineering knowledge and service.  It is also working with several electronics suppliers to jointly develop and supply these advanced products.

 

The Company’s lockset, steering column lock housing, latches and power access competitors include Huf North America, Ushin, Valeo, Tokai-Rika, Alpha-Tech, Honda Lock, Shin Chang, Magna, Edscha, Stabilus, Aisin, Brose, Mitsuba, Ohi, Kiekert, Inteva, Key Plastics and Gecom. For additional information related to competition, see the information set forth under “Risk Factors-Highly Competitive Automotive Supply Industry” included on page 30 of the Company’s 2018 Annual Report to Shareholders, which is incorporated herein by reference.

 

 

 

 

 


4

 


Research and Development

The Company engages in research and development activities pertinent to automotive access control. A major area of focus for research is the expanding role of vehicle access via electronic interlocks and modes of communicating authorization data between consumers and vehicles. Development activities include new products, applications and product performance improvements. In addition, specialized data collection equipment is developed to facilitate increased product development efficiency and continuous quality improvements. For fiscal years 2018, 2017, and 2016, the Company spent approximately $4.8 million, $4.6 million, and $430,000, respectively, on research and development. The Company believes that, historically, it has committed sufficient resources to research and development and it intends to continue to invest in the future as required to support additional product programs associated with both existing and new customers. Patents are pursued and will continue to be pursued as appropriate to protect the Company's interests resulting from these activities.

 

Customer Tooling

The Company incurs costs related to tooling used in component production and assembly.  Some of these costs are reimbursed by customers who then own the tools involved.  See the information set forth under “Notes to Financial Statements-Organization and Summary of Significant Accounting Policies-Customer Tooling in Progress” included on page 39 of the Company’s 2018 Annual Report to Shareholders, which is incorporated herein by reference.

 

Environmental Compliance

As is the case with other manufacturers, the Company is subject to Federal, state, local and foreign laws and other legal requirements relating to the generation, storage, transport, treatment and disposal of materials as a result of its  manufacturing and assembly operations. These laws include the Resource Conservation and Recovery Act (as amended), the Clean Air Act (as amended), the Clean Water Act of 1990 (as amended) and the Comprehensive Environmental Response, Compensation and Liability Act (as amended). The Company has an environmental management system that is ISO-14001 certified.  The Company believes that its existing environmental management system is adequate and it has no current plans for substantial capital expenditures in the environmental area.

    

As discussed in “Notes to Financial Statements-Commitments and Contingencies” beginning on page 50 of the Company’s 2018 Annual Report to Shareholders, a site at the Company’s Milwaukee facility is contaminated by a solvent spill from a former above-ground solvent storage tank located on the east side of the facility, which spill occurred in 1985.   This situation is being monitored by the Company.

 

The Company does not currently anticipate any materially adverse impact on its financial statements or competitive position as a result of compliance with Federal, state, local and foreign environmental laws or other legal requirements. However, risk of environmental liability and charges associated with maintaining compliance with environmental laws is inherent in the nature of the Company's business and there is no assurance that material liabilities or charges could not arise.

 

Employees

At July 1, 2018, the Company had approximately 4,420 full-time employees, of which approximately 260 or 5.9 percent were represented by a labor union, which accounts for all production employees at the Company’s Milwaukee facility.  The current contract with the unionized employees is effective through September 17, 2018.  During June 2001, there was a 16-day strike by the represented employees at the Company's Milwaukee facility. Further information regarding the strike, work stoppages and other labor matters are discussed under “Risk Factors-Disruptions Due to Work Stoppages and Other labor Matters” included on page 29 of the Company’s 2018 Annual Report to Shareholders, which is incorporated herein by reference.

 

Available Information

The Company maintains its corporate website at www.strattec.com and makes available, free of charge, through this website its code of business ethics, annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, proxy statements for annual shareholder meetings and amendments to those reports that the Company files with, or furnishes to, the Securities and Exchange Commission (the "Commission") as soon as reasonably practicable after the Company electronically files such material with, or furnishes it to, the Commission.  The Company is not including all the information contained on or made available through its website as a part of, or incorporating such information by reference into, this Annual Report on Form 10-K.  However, this report includes (or incorporates by reference) all material information about the Company that is included on the Company’s website which is otherwise required to be included in this report.

 

 

 

 

5

 


Item 1A.  Risk Factors

The information set forth under “Risk Factors” which appears on pages 27 through 31 of the Company’s 2018 Annual Report to Shareholders is incorporated herein by reference.  The risks described in the section “Risk Factors” in the Company’s 2018 Annual Report to Shareholders are not the only risks the Company faces.  Additional risks that the Company does not yet know of or that it currently thinks are immaterial may also impair its business operations.  If any of the events or circumstances described in those risks actually occur, the Company’s business, financial condition or results of operations could be materially adversely affected.  In such cases, the trading price of the Company’s common stock could decline.

 

Item 1B.  Unresolved Staff Comments

None.

 

Item 2.   Properties

The Company has four manufacturing plants, one warehouse, and one sales office. These facilities are described as follows:

 

Location

 

Type

 

Sq. Ft.

 

Owned or Leased

Milwaukee, Wisconsin

 

Headquarters and General Offices; Component Parts Manufacturing

 

352,000

 

Owned

Juarez, Chihuahua Mexico

 

Subsidiary Offices and Assembly

 

97,000

 

Owned

Juarez, Chihuahua Mexico

 

Subsidiary Offices and Assembly

 

76,000

 

Owned

Juarez, Chihuahua Mexico

 

Subsidiary Offices, Key Finishing, Injection Molding and Assembly Operations

 

140,000

 

Owned

Leon, Mexico

 

Subsidiary Offices, Door Handle Injecting Molding, Painting and Assembly

 

135,000

 

Owned

El Paso, Texas

 

Finished Goods and Service Parts Distribution Warehouse

 

114,715

 

Leased**

Auburn Hills, Michigan

 

Sales and Engineering Office for Detroit Customer Area

 

58,700

 

Owned

 

**Leased unit within a complex.

 

Item 3.  Legal Proceedings

In the normal course of business the Company may be involved in various legal proceedings from time to time.  The Company does not believe it is currently involved in any claim, action or proceeding the ultimate disposition of which would have a material adverse effect on the Company’s financial statements.

 

Item 4.   Mine Safety Disclosures

None.

 

 

 


6

 


PART II

 

Item 5.   Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

The Company’s Board of Directors authorized a stock repurchase program on October 16, 1996, and the program was publicly announced on October 17, 1996.  Since inception of the stock repurchase program, the Board of Directors has periodically increased the number of shares authorized for repurchase under the program.  At July 1, 2018, the number of shares of the Company’s common stock authorized for repurchase under the program totaled 3,839,395.  The program currently authorizes the repurchase of the Company’s common stock from time to time, directly or through brokers or agents, and has no expiration date.  Over the life of the repurchase program through July 1, 2018, a total of 3,655,322 shares have been repurchased at a cost of approximately $136.4 million.  No shares were repurchased during the quarter or year ended July 1, 2018.

 

The Company’s common stock is traded on the NASDAQ Global Market under the symbol “STRT.”  

 

The information set forth under “Financial Summary – Quarterly Financial Data (Unaudited)” included on page 62 of the Company’s 2018 Annual Report to Shareholders is incorporated herein by reference.

 

Item 6.   Selected Financial Data

The information set forth under “Financial Summary – Five Year Financial Summary,” which appears on page 61 of the Company’s 2018 Annual Report to Shareholders, is incorporated herein by reference.   Such information should be read along with the Company’s financial statements and the notes to those financial statements and with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” incorporated by reference elsewhere herein.

 

Item 7.   Management’s Discussion and Analysis of Financial Condition and Results of Operations

The information set forth under “Management’s Discussion and Analysis,” which appears on pages 14 through 31 of the Company’s 2018 Annual Report to Shareholders, is incorporated herein by reference.

 

Item 7A.   Quantitative and Qualitative Disclosures About Market Risk

Our exposure to market risk is limited to interest rate fluctuations on borrowings under our secured revolving credit facilities, foreign currency exchange rate risk associated with our foreign operations, and fluctuations in raw material commodity prices.  We do not utilize financial instruments for trading purposes.

 

Interest Rates:  We are subject to interest rate fluctuations on borrowings under our revolving credit facilities.  At July 1, 2018, we (including our majority owned subsidiary, ADAC-STRATTEC LLC) had $51 million of outstanding borrowings under our credit facilities.  The interest expense related to borrowings under these credit facilities during the year ended July 1, 2018 was $1.1 million.  A 10% increase or decrease in the interest rate on borrowings would not have a material effect on our financial position, results of operations or cash flows.

Foreign Currency:  We are subject to foreign currency exchange rate exposure related to the U.S. dollar costs of our manufacturing operations in Mexico. A portion of our manufacturing costs are incurred in Mexican pesos, which causes our earnings and cash flows to fluctuate due to changes in the U.S. dollar/Mexican peso exchange rate.  We executed contracts with Bank of Montreal that provide for monthly Mexican peso currency forward contracts for a portion of our estimated peso denominated operating costs. These peso currency forward contracts include settlement dates that began on October 16, 2015 and end on December 17, 2018. Our objective in entering into these currency forward contracts is to minimize our earnings volatility resulting from changes in exchange rates affecting the U.S. dollar cost of our Mexican operations. The Mexican peso forward contracts are not used for speculative purposes and are not designated as hedges.  As a result, all currency forward contracts are recognized in our accompanying consolidated financial statements at fair value and changes in the fair value are reported in current earnings as part of Other Income, net.

The following table quantifies the outstanding Mexican peso forward contracts as of July 1, 2018 (thousands of dollars, except average forward contractual exchange rates):

 

 

Effective Dates

 

Notional Amount

 

 

Average Forward Contractual Exchange Rate

 

 

Fair Value

 

Buy MXP/Sell USD

 

July 16, 2018 - December 17, 2018

 

$

6,000

 

 

 

20.02

 

 

$

(39

)

7

 


The fair market value of all outstanding Mexican peso forward contracts in the accompanying Consolidated Balance Sheets was as follows (thousands of dollars):

 

 

July 1, 2018

 

 

July 2, 2017

 

Not designated as hedging instruments:

 

 

 

 

 

 

 

 

Other current (liabilities) assets:

 

 

 

 

 

 

 

 

Mexican peso forward contracts

 

$

(39

)

 

$

1,121

 

 

The pre-tax effects of the Mexican peso forward contracts on the accompanying Consolidated Statements of Income and Comprehensive Income (Loss) consisted of the following (thousands of dollars):

 

 

Other Income, net

 

 

 

Years Ended

 

 

 

July 1, 2018

 

 

July 2, 2017

 

 

July 3, 2016

 

Not Designated as Hedging Instruments:

 

 

 

 

 

 

 

 

 

 

 

 

Realized gain (loss)

 

$

1,140

 

 

$

(1,650

)

 

$

(1,196

)

Unrealized (loss) gain

 

$

(1,160

)

 

$

2,010

 

 

$

(889

)

 

See “Risk Factors – Currency Exchange Rate Fluctuations” included on page 29 of the Company’s 2018 Annual Report to Shareholders, which is incorporated herein by reference, for more information.

 

Raw Materials Commodity Prices:  Our primary raw materials are high-grade zinc, brass, nickel silver, aluminum, steel and plastic resins. These materials are generally available from a number of suppliers, but we have chosen to concentrate our sourcing with one primary vendor for each commodity or purchased component. We believe our sources of raw materials are reliable and adequate for our needs. However, the development of future sourcing issues related to using existing or alternative raw materials and the global availability of these materials as well as significant fluctuations in the market prices of these materials may have an adverse effect on our financial results if the increased raw material costs cannot be recovered from our customers. Given the significant financial impact on us relating to changes in the cost of our primary raw materials, commencing with fiscal 2008, we began quoting quarterly material price adjustments for changes in our zinc costs in our negotiations with our customers. Our success in obtaining these quarterly price adjustments in our customer contracts is dependent on separate negotiations with each customer. It is not a standard practice for our customers to include such price adjustments in their contracts. We have been successful in obtaining quarterly price adjustments in some of our customer contracts. However, we have not been successful in obtaining the adjustments with all of our customers.  See “Risk Factors –Sources of and Fluctuations in Market Prices of Raw Materials” included on page 29 of the Company’s 2018 Annual Report to Shareholders, which is incorporated herein by reference, for more information.

 

Item 8.   Financial Statements and Supplementary Data

The financial statements, together with the report thereon of Deloitte & Touche LLP dated September 6, 2018, the report of management on internal control over financial reporting and the report of Deloitte & Touche LLP on internal control over financial reporting dated September 6, 2018, which appear on pages 32 through 60 of the Company’s 2018 Annual Report to Shareholders, are incorporated herein by reference.  

 

Our quarterly results of operations included under “Financial Summary-Quarterly Financial Data (Unaudited)” which appears on page 62 of the Company’s 2018 Annual Report to Shareholders is incorporated herein by reference.

 

Item 9.   Changes In and Disagreements with Accountants on Accounting and Financial Disclosure

None.



8

 


Item 9A.  Controls and Procedures

The Company maintains disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)), that are designed to ensure that information required to be disclosed by the Company in reports that it files or submits under the Exchange Act, is recorded, processed, summarized and reported within the time periods specified in the U.S. Securities and Exchange Commission’s rules and forms, and that the information required to be disclosed by the Company in reports that it files or submits under the Exchange Act is accumulated and communicated to its management, including its Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.  The Company carried out an evaluation as of the end of the period covered by this report, under the supervision and with the participation of the Company’s management, including its Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of the Company’s disclosure controls and procedures.  Based on such evaluation, the Company’s Chief Executive Officer and Chief Financial Officer concluded that the Company’s disclosure controls and procedures were effective as of the end of the period covered by this report at reaching a level of reasonable assurance.   It should be noted that in designing and evaluating the disclosure controls and procedures, management recognized that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and management was necessarily required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures.  The Company has designed its disclosure controls and procedures to reach a level of reasonable assurance of achieving the desired control objectives.

 

There was no change in the Company's internal control over financial reporting (as defined in Rules 13a‑15(f) and 15d‑15(f) under the Exchange Act) that occurred during the quarter ended July 1, 2018 that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting.

 

The report of management required under this Item 9A is included on page 58 of the Company’s 2018 Annual Report to Shareholders under the heading “Report on Management’s Assessment of Internal Control over Financial Reporting” and is incorporated herein by reference.

 

The attestation report required under this Item 9A is included on page 59 of the Company’s 2018 Annual Report to Shareholders under the heading “Report of Independent Registered Public Accounting Firm” and is incorporated herein by reference.

 

Item 9B. Other Information

Not applicable.


9

 


PART III

 

Item 10.  Directors, Executive Officers and Corporate Governance

The information included in the Company’s Proxy Statement, dated on or about September 6, 2018, under “Proposal 1: Election of Directors,”  “Corporate Governance Matters-Code of Business Ethics,” “Audit Committee Matters-Audit Committee Financial Expert,” “Executive Officers,”  “Section 16(a) Beneficial Ownership Reporting Compliance”, and “Corporate Governance Matters-Director Nominations” is incorporated herein by reference.

 

The Audit Committee of the Company’s Board of Directors is an “audit committee” for purposes of Section 3(a)(58)(A) of the Securities Exchange Act of 1934.  The members of the Audit Committee consist of three outside independent directors, David R. Zimmer, Audit Committee Chairman, Thomas W. Florsheim, Jr., and Michael J. Koss.

 

Item 11.  Executive Compensation

The information included in the Company’s Proxy Statement, dated on or about September 6, 2018, under “Director Compensation” and “Executive Compensation” is incorporated herein by reference.  

 

The information incorporated by reference from “Report of the Compensation Committee” in the Company’s Proxy Statement, dated on or about September 6, 2018, shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, nor shall it be deemed incorporated by reference in any filing under the Securities Act of 1933 or the Securities Exchange Act of 1934, except as shall be expressly set forth by specific reference in such filing.

 

Item 12.  Security Ownership of Certain Beneficial Owners and Management and Related Shareholder Matters

The information included in the Company’s Proxy Statement, dated on or about September 6, 2018, under “Security Ownership” is incorporated herein by reference.

 

Equity Compensation Plan Information

The following table summarizes share information, as of July 1, 2018, for the Company's Amended and Restated Stock Incentive Plan.

 

Plan Category

Number of
common shares to be
issued upon exercise
of outstanding options,
warrants, and rights

Weighted-average
exercise price of
outstanding options,
warrants, and rights

Number of
common shares
available for future
issuance under equity
compensation plans

 

 

 

 

Equity compensation plans approved by shareholders

 

133,074

 

$29.37

 

181,264

Equity compensation plans not approved by shareholders


            -


          -


           -

Total

133,074

$29.37

181,264

 

Item 13.  Certain Relationships and Related Transactions, and Director Independence

The information included in the Company’s Proxy Statement, dated on or about September 6, 2018, under “Transactions With Related Persons” and “Corporate Governance Matters-Director Independence” is incorporated herein by reference.

 

Item 14. Principal Accountant Fees and Services

The information included in the Company’s Proxy Statement, dated on or about September 6, 2018, under “Audit Committee Matters-Fees of Independent Registered Public Accounting Firm” is incorporated herein by reference.

 

 

 

 


10

 


PART IV

 

Item 15.  Exhibits and Financial Statement Schedules

 

(a)

The following documents are filed as part of this report:

 

 

(1)

Financial Statements - The following financial statements of the Company, included on pages 32 through 60 of the Company’s 2018 Annual Report to Shareholders, are incorporated by reference in Item 8 of this Form 10-K annual report:

 

Reports of Independent Registered Public Accounting Firm (Deloitte & Touche LLP)

 

Consolidated Balance Sheets - as of July 1, 2018 and July 2, 2017

 

Consolidated Statements of Operations and Comprehensive Income (Loss) - years ended July 1, 2018, July 2, 2017 and July 3, 2016

 

Consolidated Statements of Shareholders’ Equity – years ended July 1, 2018, July 2, 2017 and July 3, 2016

 

Consolidated Statements of Cash Flows - years ended July 1, 2018, July 2, 2017 and July 3, 2016

 

Notes to Financial Statements

 

(2)Financial Statement Schedule

 

All schedules have been omitted because they are not applicable or are not required, or because the required information has been included in the Financial Statements or Notes thereto.

 

 

(3)

Exhibits.  See “Exhibit Index” beginning on page 12 of this report.

 

 

(b)

Exhibits

 

See “Exhibit Index” and the exhibits attached hereto or previously filed as described in the “Exhibit Index” beginning on page 12 of this report.

 

 

(c)

Financial Statement Schedules

 

None required.

 

11

 


EXHIBIT INDEX TO ANNUAL REPORT

ON FORM 10-K

 

Exhibit

 

 

 

3.1 (17)

 

Amended and Restated Articles of Incorporation of the Company

*

3.2 (1)

 

Amended By-laws of the Company

*

4.1 (2)

 

Credit Agreement, dated as of August 1, 2011, between STRATTEC SECURITY CORPORATION and BMO Harris Bank N.A., as lender

*

4.2 (16)

 

Amendment No. 1 to Amended and Restated Security Agreement, dated as of June 26, 2017, between STRATTEC SECURITY CORPORATION and BMO Harris Bank N.A., as lender

*

4.3 (17)

 

Amended and Restated Security Agreement, dated as of June 28, 2012, made by STRATTEC SECURITY CORPORATION in favor of BMO Harris Bank N.A., as lender

*

4.4 (7)

 

Amendment No. 1 to Credit Agreement, dated as of December 27, 2013, between STRATTEC SECURITY CORPORATION and BMO Harris Bank N.A., as lender

*

4.5 (8)

 

Amendment No. 2 to Credit Agreement, dated as of June 25, 2015, between STRATTEC SECURITY CORPORATION and BMO Harris Bank N.A., as lender

*

4.6 (14)

 

Amendment No. 3 to Credit Agreement, dated as of June 24, 2016, between STRATTEC SECURITY CORPORATION and BMO Harris Bank N.A., as lender

*

4.7 (16)

 

Amendment No. 4 to Credit Agreement, dated as of June 26, 2017, between STRATTEC SECURITY CORPORATION and BMO Harris Bank N.A., as lender

*

4.8 (8)

 

Credit Agreement, dated as of June 28, 2012, between ADAC-STRATTEC LLC and BMO Harris Bank N.A., as lender

*

4.9 (8)

 

Amendment No. 1 to Credit Agreement, dated as of January 22, 2014, between ADAC-STRATTEC LLC and BMO Harris Bank N.A., as lender

*

4.10 (8)

 

Amendment No. 2 to Credit Agreement, dated as of June 25, 2015, between ADAC-STRATTEC LLC and BMO Harris Bank N.A., as lender

*

4.11 (13)

 

Amendment No. 3 to Credit Agreement, dated as of April 27, 2016, between ADAC-STRATTEC LLC and BMO Harris Bank N.A., as lender

*

4.12 (16)

 

Amendment No. 4 to Credit Agreement, dated as of June 26, 2017, between ADAC-STRATTEC LLC and BMO Harris Bank N.A., as lender

*

4.13 (18)

 

Amendment No. 5 to Credit Agreement, dated as of March 27, 2018, between ADAC-STRATTEC LLC and BMO Harris Bank N.A., as lender

*

10.1 (9)**

 

Amended and Restated STRATTEC SECURITY CORPORATION Stock Incentive Plan

*

10.2 (11)**

 

Form of Restricted Stock Grant Agreement with employees

*

10.3 (12)**

 

Amended STRATTEC SECURITY CORPORATION Economic Value Added Bonus Plan for Executive Officers and Senior Managers

*

10.4 (4) **

 

Amended STRATTEC SECURITY CORPORATION Economic Value Added Bonus Plan for Non-employee Members of the Board of Directors

*

10.5 (10) **

 

Amended and Restated STRATTEC SECURITY CORPORATION Supplemental Executive Retirement Plan

*

10.6 (3)**

 

Employment Agreement between the Company and Frank J. Krejci made as of May 5, 2010

*

10.7 (3)**

 

Employment Agreement between the Company and Patrick J. Hansen made as of May 5, 2010

*

10.8 (3)**

 

Employment Agreement between the Company and Rolando J. Guillot made as of May 5, 2010

*

10.9 (3)**

 

Employment Agreement between the Company and Brian J. Reetz made as of May 5, 2010

*

10.10 (3)**

 

Employment Agreement between the Company and Richard P. Messina made as of May 5, 2010

*

10.11 (17) **

 

Employment Agreement between the Company and Al Hamdan made as of May 4, 2017

*

10.12 (15) **

 

Change of Control Employment Agreement between the Company and Frank J. Krejci made as of July 1, 2016

*

10.13 (15) **

 

Change of Control Employment Agreement between the Company and Patrick J. Hansen  made as of July 1, 2016

*

10.14 (15) **

 

Change of Control Employment Agreement between the Company and Rolando J. Guillot made as of July 1, 2016

*

10.15 (15) **

 

Change of Control Employment Agreement between the Company and Brian J. Reetz made as of July 1, 2016

*

10.16 (15) **

 

Change of Control Employment Agreement between the Company and Richard P. Messina made as of July 1, 2016

*

10.17 (17)**

 

Change of Control Employment Agreement between the Company and Al Hamdan made as of May 4, 2017

*

10.18 (11)**

 

Form of Restricted Stock Grant Agreement with non-employee directors

*

10.19 (6)**

 

Amended STRATTEC SECURITY CORPORATION Employee Stock Purchase Plan

*

10.20 (5)**

 

Letter Agreement between the Company and Harold M. Stratton II made as of September 1, 2012

*

12

 


13

 

Annual Report to Shareholders for the year ended July 1, 2018

 

21

 

Subsidiaries of the Company

 

23

 

Consent of Independent Registered Public Accounting Firm dated September 6, 2018

 

31.1

 

Rule 13a-14(a) Certification for Frank J. Krejci, Chief Executive Officer

 

31.2

 

Rule 13a-14(a) Certification for Patrick J. Hansen, Chief Financial Officer

 

32 (19)

 

18 U.S.C. Section 1350 Certifications

 

101

 

Interactive Data Files pursuant to Rule 405 of Regulation S-T

 

 

*

Previously filed

**

Management contract or compensatory plan or arrangement

 

(1)

Incorporated by reference from the exhibit to the Form 8-K filed on October 7, 2005.

(2)

Incorporated by reference from the exhibit to the Form 8-K filed on August 4, 2011.

(3)

Incorporated by reference from the exhibit to the March 28, 2010 Form 10-Q filed on May 6, 2010.

(4)

Incorporated by reference from the exhibit to the July 3, 2011 Form 10-K filed on September 8, 2011.

(5)

Incorporated by reference from the exhibit to the July 1, 2012 Form 10-K filed on September 6, 2012.

(6)

Incorporated by reference from the exhibit to the Form 8-K filed on January 2, 2013.

(7)

Incorporated by reference from the exhibit to the Form 8-K filed on December 27, 2013.

(8)

Incorporated by reference from the exhibit to the Form 8-K filed on June 25, 2015.

(9)

Incorporated by reference from the exhibit to the Form 10-Q filed on November 6, 2014.

(10)

Incorporated by reference from the exhibit to the Form 8-K filed on October 10, 2013.

(11)

Incorporated by reference from the exhibit to the Form 10-K filed on September 5, 2014.

(12)

Incorporated by reference from the exhibit to the Form 10-K filed on September 4, 2015.

(13)

Incorporated by reference from the exhibit to the Form 8-K filed on April 29, 2016.

(14)

Incorporated by reference from the exhibit to the Form 8-K filed on June 24, 2016.

(15)

Incorporated by reference from the exhibit to the Form 10-K filed on September 8, 2016.

(16)

Incorporated by reference from the exhibit to the Form 8-K filed on June 27, 2017.

(17)

Incorporated by reference from the exhibit to the Form 10-K filed on September 7, 2017.

(18)

Incorporated by reference from the exhibit to the Form 8-K filed on March 27, 2018.

(19)

This certification is not "filed" for purposes of Section 18 of the Securities Exchange Act of 1934, as amended, or incorporated by reference into any filing under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended.

13

 


SIGNATURES

Pursuant to the requirements of Section 13 of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

 

STRATTEC SECURITY CORPORATION

 

 

 

 

By:

/s/ Frank J. Krejci

 

Frank J. Krejci

 

President and Chief Executive Officer

 

Date:  September 6, 2018

Pursuant to the requirement of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.

 

Signature

 

Title

 

Date

 

 

 

 

 

/s/ Frank J. Krejci

 

President, Chief Executive Officer,

 

September 6, 2018

Frank J. Krejci

 

and Director

 

 

 

 

(Principal Executive Officer)

 

 

 

 

 

 

 

/s/ Harold M. Stratton II

 

Chairman and Director

 

August 22, 2018

Harold M. Stratton II

 

 

 

 

 

 

 

 

 

/s/ Michael J. Koss

 

Director

 

August 22, 2018

Michael J. Koss

 

 

 

 

 

 

 

 

 

/s/ Thomas W. Florsheim, Jr.

 

Director

 

August 22, 2018

Thomas W. Florsheim, Jr.

 

 

 

 

 

 

 

 

 

/s/ David R. Zimmer

 

Director

 

August 22, 2018

David R. Zimmer

 

 

 

 

 

 

 

 

 

/s/ Patrick J. Hansen

 

Senior Vice President, Chief

 

September 6, 2018

Patrick J. Hansen

 

Financial Officer,

 

 

 

 

Secretary and Treasurer

 

 

 

 

(Principal Financial and

 

 

 

 

Accounting Officer)

 

 

 

14

 

EX-13

LOGO


LOGO


LOGO


LOGO

LETTER TO THE SHAREHOLDERS

 

 

Dear STRATTEC Shareholders,

We made progress on many fronts this year.

Thanks to all of our Associates for their efforts. Over the past two years, we have been challenged to deliver on two to three times the number of product launches than is typical for STRATTEC. I wish that I could say that everything went flawlessly, but that is not the case. We incurred some added costs as we ramped up manufacturing and incurred premium freight in order to properly serve our customers. For this coming year, as we digest the new business, there is opportunity for us to improve our efficiencies at the same time as we add the impact of more sales.

While the new tax law certainly benefitted our bottom line for one half of our fiscal year, we still would have shown significant progress without it. With the encouragement of our Board of Directors, we were pleased to share some of the tax law benefits with our Associates in recognition of their efforts and the progress we made this past year.

INNOVATION

Despite the short term challenges of delivering on our commitments, we continue to maintain a focus on innovation for the future, thus keeping a pipeline of opportunity ahead of us.

We are very proud of being a winner of the very prestigious PACE Award and for being featured on the front page of the April 16 edition of Automotive News Magazine for our Invis-A-Rise power tailgate system (see inside cover for a description of benefits). We competed against many companies, many much larger than STRATTEC.

In addition to creating an innovative concept, it took the cooperation of the engineers at Honda to make modifications to their Odyssey vehicle and put it in production to make us eligible for the award. While there was a dedicated group of people involved, it was an opportunity for the entire company to celebrate and take pride in our collective accomplishments.

We also drew much attention by introducing a power end gate on the Chevrolet Silverado pick-up truck at the Detroit Auto Show in January 2018. This product allows the consumer to both lower and raise the gate on the back of their pick-up truck automatically. This is a new product in a market segment with very significant growth potential, with production beginning this fiscal year.    

We continue to see many opportunities in offering more power assisted products. Convenience continues to be an increasing expectation. It also appears that power doors which automatically open and close will play an important role in the longer term development of autonomous vehicles.

OPERATIONS

With the unusually high number of program launches recently, it stretched our organization to deliver product launches on a timely basis. We are now in the phase of moving from a time when we spent significant money and effort on developing products for new business to a time where those new projects will evolve into sales. That now gives us the opportunity to focus on improved process efficiency and asset utilization. It also gives us the opportunity to redeploy our people to focus on new initiatives.

Our capital spending was higher than normal. We invested in equipment to support new business as well as improve efficiencies. We should soon benefit from lower rates of

 

 

2018  STRATTEC  Annual  Report    2


LETTER TO THE SHAREHOLDERS

 

 

capital expenditures and the higher utilization of new equipment, thus helping both earnings and cash flow.

The Leon, Mexico plant is still in its start-up phase. While we are beginning to produce painted door handles, it is still negatively impacting our profitability. We expect to see continued improvement as operational performance is enacted and additional volume is realized.

We had another good year of winning business. While it will take some time for these wins to convert into sales, it makes us confident that we will continue to be busy.

With the current talk of tariffs and trade wars, it is certainly a concern which may negatively impact overall market volumes. How it may specifically impact our primary customers is difficult to predict. Whatever happens in the overall market, any negative impacts on STRATTEC will be tempered by our increase in content per vehicle.

VAST

This unique partnership, that was formed nearly two decades ago, continues to grow and create opportunities. It is interesting to see how more partnerships are now being formed in automotive and other industries. More companies are recognizing the opportunity to mutually benefit each other without trying to blend organizations together or taking on debt to finance an acquisition.

With our family owned partners, WITTE Automotive of Germany and ADAC Automotive of Michigan, we continue to find ways to better collaborate with each other. We originally created an alliance to give each of us global support of our North American and European customers. That included joint investments in China and India. We are now experiencing the benefits of the rapidly growing Chinese market. Through cooperative efforts and support, our VAST China operations experienced significant growth in sales and profitability this year and we are optimistic that this trend will continue.

SUMMARY

In 1908, Steve Briggs and Harry Stratton saw a time full of change and opportunity in the early days of the automobile industry. While the path was not always smooth, they launched a business that has grown into what STRATTEC is today. We are thankful for their foresight and perseverance.

As we celebrate our 110th anniversary, we are part of an automotive industry which is vastly different. It is full of rapid global and technological shifts, but once again, full of change and opportunity.

I am pleased to report that this 110th year was both a year of significant progress and a year that positions us to take advantage of more opportunity in the future.

Thank you to our Shareholders, our Directors, our Customers and our Associates.

Sincerely,

 

LOGO

Frank J. Krejci

President & Chief Executive Officer

 

 

2018  STRATTEC  Annual  Report    3


LOGO

FINANCIAL HIGHLIGHTS

(IN MILLIONS)

 

 

        2018         2017         2016
    

 

 

 

Net Sales

     $ 439.2        $ 417.3        $ 401.4

Gross Profit

       54.4          61.0          65.7

Income from Operations

       13.3          14.8          22.2

Net Income Attributable to STRATTEC

       12.3          7.2          9.1

Total Assets

       307.2          273.7          242.2

Total Debt

       51.0          30.0          20.0

STRATTEC Shareholders’ Equity

       162.2          151.1          139.3

ECONOMIC VALUE ADDED (EVA®)

We believe that EVA® represents an accurate measure of STRATTEC’s overall performance and shareholder value. All U.S. associates and many of our Mexico-based salaried associates participate in incentive plans that are based upon our ability to add economic value to the enterprise. The EVA® performance for 2018 was a negative $3.3 million which represents a $0.9 million reduction from 2017. (For further explanation of our EVA® Plan and suggested changes for fiscal 2019, see our 2018 definitive Proxy Statement.)

 

Net Operating Profit After Cash-Basis Taxes

            $ 12.3

Average Monthly Net Capital Employed

     $ 155.8       

Cost of Capital

       10%         
    

 

 

        

Capital Charge

                 15.6
           

 

 

 

Economic Value Added

            $ (3.3 )
           

 

 

 

EVA® is not a traditional financial measurement under U.S. GAAP and may not be similar to EVA® calculations used by other companies. However, STRATTEC believes the reporting of EVA® provides investors with greater visibility of economic profit. The following is a reconciliation of the relevant GAAP financial measures to the non-GAAP measures used in the calculation of STRATTEC’s EVA®.

 

Net Operating Profit After Cash-Basis Taxes:

    

2018 Net Income Attributable to STRATTEC as Reported

     $ 12.3

Deferred Tax Provision

       1.0

Other

       (1.0 )
    

 

 

 

Net Operating Profit After Cash-Basis Taxes

     $ 12.3
    

 

 

 

Average Monthly Net Capital Employed:

    

Total STRATTEC Shareholders’ Equity as Reported July 1, 2018

     $ 162.2

Long-Term Liabilities

       55.1

Long-Term Assets – Other than Property, Plant and Equipment

       (39.5 )

Other

       (6.0 )
    

 

 

 

Net Capital Employed At July 1, 2018

     $ 171.8

Impact of 12 Month Average

       (16.0 )
    

 

 

 

Average Monthly Net Capital Employed

     $ 155.8
    

 

 

 

 

EVA® is a registered trademark of Stern, Stewart & Co.

 

 

2018  STRATTEC  Annual  Report    4


COMPANY DESCRIPTION

 

 

BASIC BUSINESS

STRATTEC SECURITY CORPORATION designs, develops, manufactures and markets automotive access control products including mechanical locks and keys, electronically enhanced locks and keys, steering column and instrument panel ignition lock housings, latches, power sliding side door systems, power lift gate systems, power deck lid systems, door handles and related products for North American automotive customers. We also supply global automotive manufacturers through a unique strategic joint venture relationship with WITTE Automotive of Velbert, Germany and ADAC Automotive of Grand Rapids, Michigan called VAST Automotive Group (“VAST”). Under this relationship STRATTEC, WITTE and ADAC market each company’s products to global customers under the VAST Automotive Group brand name. Our products are shipped to customer locations in the United States, Canada, Mexico, Europe, South America, Korea, China and India, and we provide full service and aftermarket support.

 

 

LOGO

HISTORY

The product line that became STRATTEC was part of Briggs & Stratton Corporation’s founding business in 1908. In 1995, STRATTEC was spun off from Briggs & Stratton through a tax-free distribution to the then-existing Briggs & Stratton shareholders and has been an independent public company for over twenty-three years.

Our history in the automotive security business spans 110 years. STRATTEC has been the world’s largest producer of automotive locks and keys since the late 1920s, and we currently maintain a dominant share of the North American markets for these products.

 

LOGO

PRODUCTS

Our traditional products are lock sets (locks and keys) for cars and light trucks. Typically, two keys are provided with each vehicle lockset. Most of the vehicles we currently supply are using keys with sophisticated radio frequency identification technology for additional theft prevention. Keys with remote entry devices integrated into a single unit and bladeless electronic keys have been added to our product line and are gaining in popularity.

Ignition lock housings represent a growing access control product for us. These housings are the mating part for our ignition locks and typically are part of the steering column structure, although there are instrument panel-mounted versions for certain vehicle applications. These housings are either die cast from zinc or injection molded plastic and may include electronic components for theft deterrent systems.

We have developed and are continuing to develop access control products, including trunk latches, lift gate latches, tailgate latches, hood latches, side door latches and related hardware. With our acquisition of Delphi Corporation’s Power Products Group in fiscal 2009, we are now supplying power access devices for sliding side doors, lift gates and trunk lids. Through

 

LOGO

 

LOGO

 

LOGO

 

LOGO

 

 

2018  STRATTEC  Annual  Report    5


LOGO

COMPANY DESCRIPTION

 

 

a joint venture formed with ADAC Automotive during fiscal 2007, we also supply painted and non-painted door handle components and related vehicle access hardware.

To maintain a strong focus on each of these access control products, we have Product Business Managers who oversee the product’s entire life cycle, including product concept, application, manufacturing, warranty analysis, service/aftermarket, and financial/commercial issues. The Product Business Managers work closely with our sales organization, our engineering group, and our manufacturing operations to assure their products are receiving the right amount of quality attention so that their value to STRATTEC and the market place is enhanced.

 

LOGO

 

LOGO

 

 

LOGO

MARKETS

We are a direct supplier to OEM automotive and light truck manufacturers as well as other transportation-related manufacturers. Our largest customers are Fiat Chrysler Automobiles, General Motors Company and Ford Motor Company. Our access control product mix varies by customer, but generally our overall sales tend to be highest in lock and key, followed by power access (produced by STRATTEC Power Access), ignition lock housings, the door handle and trim components produced by ADAC-STRATTEC de Mexico and latch mechanisms.

Direct sales to various OEMs represented approximately 76% of our total sales for fiscal 2018. The remainder of our revenue is received primarily through sales to the OEM service channels, the aftermarket and Tier 1 automotive supplier customers, and sales of certain products to non-automotive commercial customers.

Sales to our major automotive customers, both OEM and Tier 1, are coordinated through direct sales personnel located in our Detroit-area office. Sales are also facilitated through daily interaction between our Program Managers, Application Engineers and other product engineering personnel. Sales to other OEM customers are accomplished through a combination of our sales personnel located in Detroit and personnel in our Milwaukee headquarters office.

The majority of our OEM products are sold in North America. While some exporting is done to Tier 1 and automotive assembly plants in Europe, Asia and South America, we are in the process of expanding our presence in these markets and elsewhere through the Vehicle Access Systems Technology LLC (VAST LLC) joint venture we jointly own with WITTE Automotive and ADAC Automotive. VAST is described in more detail on pages 8, 9 and 10.

OEM service and replacement parts are sold to the OEM’s own service operations. In addition, we distribute our components and security products to the automotive aftermarket through approximately 50 authorized wholesale distributors, as well as other marketers and users of component parts, including export customers. Increasingly, our products find their way into the retail channel, specifically the hardware store channel. Our ability to provide a full line of keys to that channel has been accomplished through the introduction of the STRATTEC “XL” key line. This extension to our line includes keys that we

 

LOGO

 

 

2018  STRATTEC  Annual  Report    6


COMPANY DESCRIPTION

 

 

currently do not supply on an OEM basis, including keys for Toyota, Honda and other popular domestic and import vehicles. This extended line of keys enables automotive repair specialists to satisfy consumer needs for repair or replacement parts. Our aftermarket activities are serviced through a warehousing operation in El Paso, Texas.

CUSTOMER SALES FOCUS

To bring the proper focus to the relationships with our major customers, we have seven customer-focused teams, each with a Director of Sales, one or two Engineering Program Managers and various Customer Application Engineers. In addition to customer teams for General Motors, Ford and Fiat Chrysler, we currently have teams for New Domestic Vehicle Manufacturers (primarily the Japanese and Korean automotive manufactures), Driver Control/Ignition Lock Housing customers, Tier 1 customers, and Service and Aftermarket customers. Sales and engineering for ADAC-STRATTEC LLC are supported by our partner in this joint venture, ADAC Automotive.

Each Sales Director is responsible for the overall relationship between STRATTEC and a specific customer group. Program Managers are responsible for coordinating cross functional activities while managing new product programs for their customers.

 

LOGO

 

LOGO

 

LOGO

PRODUCT ENGINEERING FOCUS

To best serve our customers’ product needs, STRATTEC’s engineering resources are organized into groups which focus on specific access control applications. We currently have six engineering groups: Locks and Keys, Aftermarket, Latches, Power Access Devices, Driver Control/Ignition Lock Housings and Electrical. Each group has a Product Business Manager, an Engineering Manager and a complement of skilled engineers who design and develop products for specific applications. In doing this, each engineering group works closely with the Customer teams, Engineering Program Managers, and Application Engineers.

Underlying this organization is a formalized product development process to identify and meet customer needs in the shortest possible time. By following this streamlined development system, we shorten product lead times, tighten our response to market changes and provide our customers with the optimum value solution to their security/access control requirements. STRATTEC is also IATF 16949:2016 and ISO 14001 certified. This means we embrace the philosophy that quality should exist not only in the finished product, but in every step of our processes as well.

 

LOGO

 

LOGO

 

LOGO

 

 

2018  STRATTEC  Annual  Report    7


LOGO

COMPANY DESCRIPTION

 

 

OPERATIONS

A significant number of the components that go into our products are manufactured at our headquarters in Milwaukee, Wisconsin. This facility produces zinc die cast components, stampings and milled key blades. We have three owned production facilities currently in operation in Juarez, Mexico operating as STRATTEC de Mexico. Plant No. 1 houses assembly operations for locksets and ignition lock housings. Plant No. 2 was built during fiscal 2009 to replace a leased facility. It houses our key finishing and plastic injection molding operations, as well as dedicated space for the assembly operations of ADAC-STRATTEC de Mexico. Plant No. 3 was purchased in fiscal 2015 and houses both latch and power access assembly operations for STRATTEC Power Access de Mexico. Plant No. 4 is in Leon, Mexico and houses our custom paint system for door handles and assembly for ADAC-STRATTEC de Mexico and is owned by the ADAC-STRATTEC de Mexico joint venture. This facility was operational during the second quarter of fiscal year 2018.

 

LOGO

 

LOGO

ADVANCED DEVELOPMENT

Research and development activities are centered around a dedicated research engineering staff we call our Advanced Development Group. This group has the responsibility for developing future products that will keep us in the forefront of the markets we serve. We primarily focus on electronic and mechanical access control products and modularization of related access/security control components. Once our Advanced Development Group establishes a proof-of-concept product utilizing new technology, any further product development is then shifted to our engineering groups for commercialization and product applications.

 

LOGO

 

LOGO

VEHICLE ACCESS SYSTEMS TECHNOLOGY LLC (VAST)

In fiscal 2001, we entered into a formal alliance with WITTE-Velbert GmbH, an automotive supplier based in Germany which designs, develops, manufactures and markets automotive access control products for European-based customers. This alliance consisted of two initiatives. The first was a set of legal agreements which allowed STRATTEC to manufacture and market WITTE’s core products in North America, and WITTE to manufacture and market STRATTEC’s core products in Europe. The second initiative was a 50:50 joint venture, WITTE-STRATTEC LLC, to invest in operations with local partners in strategic markets outside of Europe and North America.

In February of 2006, we announced the expansion of this alliance and related joint venture with the

 

 

2018  STRATTEC  Annual  Report    8


COMPANY DESCRIPTION

 

 

 

 

LOGO

 

LOGO

addition of a third partner, ADAC Plastics, Inc. ADAC, of Grand Rapids, Michigan, adds North American expertise in door handles, a part of WITTE’s core product line that STRATTEC did not support, and an expertise in color-matched painting of these components.

With the expansion of the alliance, we can offer a full range of access control related products available on a global basis to support customer programs. To identify this powerful combination of independent companies focused on working together, we renamed the joint venture Vehicle Access Systems Technology LLC (VAST LLC). We now refer to the combination of the alliance structure and joint venture as “VAST Automotive Group” (VAST). WITTE is now called WITTE Automotive, and ADAC is now doing business as ADAC Automotive. We have adopted a common graphic image in which we share a logo mark and colors, and a specific VAST logo used on the partners’ printed and electronic presentation materials. What is now VAST made investments with a local partner in Brazil in September, 2001, and local partners in China in March, 2002. However, during fiscal 2010, VAST LLC purchased the remaining 40 percent interest of its local partners in the China venture. VAST China is now wholly owned by VAST LLC and had annual net sales of approximately $174 million and $128 million during fiscal 2018 and 2017, respectively. This was an important step which gives STRATTEC a one-third interest in VAST China’s activities in the important growing Chinese/Asian market for manufacturing and assembly of painted door handles, locksets and latch products. VAST China currently operates out of two manufacturing facilities in Taicang and Fuzhou, China, with plans to open a third facility within the next two years to support new growth in the China market. In March, 2014, VAST LLC purchased the remaining 49 percent interest of its local partner in Brazil, which had annual net sales of approximately $1 million during fiscal years 2018 and 2017.

 

LOGO

 

 

2018  STRATTEC  Annual  Report    9


LOGO

COMPANY DESCRIPTION

 

 

On April 30, 2015 VAST LLC executed a purchase agreement to become a 50:50 Joint Venture partner with Minda Management Services Limited, an affiliate of both Minda Corporation Limited and Spark Minda, Ashok Minda Group of New Delhi, India (collectively, “Minda”). As part of this transition, VAST acquired a fifty percent equity interest in the former Minda-Valeo Security Systems joint venture entity, based in Pune, India, for approximately $12 million. This joint venture entity was renamed Minda-VAST Access Systems (“Minda-VAST”). Minda-VAST has operations in Pune and Delhi and had annual sales of approximately $36 million and $34 million during fiscal years 2018 and 2017, respectively. Minda is a leading manufacturer of security & access products and handles, for both OEMs and the aftermarket in India. Minda-VAST financial results are accounted for on the equity method of accounting by VAST LLC.

For further VAST LLC financial information, see “Equity Earnings (Loss) of Joint Ventures” on pages 47 through 49 included in this 2018 Annual Report.

VAST is the embodiment of STRATTEC’s, WITTE’s and ADAC’s globalization strategy. We are developing VAST as a global brand with which we are jointly pursuing business with identified global customers. Those identified customers are General Motors, Ford, Fiat/Chrysler, Volkswagen, Honda, Toyota, Renault/Nissan and Hyundai/Kia.

To manage our customer relationships and coordinate global ventures and activities, we have established a VAST Management Group led by a President. The Management Group includes three Vice Presidents, one each from WITTE, STRATTEC and ADAC. With the focus provided by this Management Group, VAST is able to manage global programs with a single point of contact for customers, with the added advantage of providing regional support from the partners’ operating entities.    Combined with VAST LLC’s ventures in China and Brazil, and sales/engineering offices in Japan and Korea, this structure establishes our global footprint.

 

LOGO

 

 

2018  STRATTEC  Annual  Report    10


COMPANY DESCRIPTION

 

 

 

LOGO

ADAC-STRATTEC de MEXICO

During fiscal 2007, we formed a new entity with ADAC Automotive called ADAC-STRATTEC LLC including a wholly owned Mexican subsidiary ADAC-STRATTEC de Mexico (ASdM). The purpose of this joint venture is to produce certain ADAC and STRATTEC products utilizing ADAC’s plastic molding injection expertise and STRATTEC’s assembly capability. ASdM currently operates out of defined space in STRATTEC de Mexico Plant No. 2 located in Juarez, Mexico. Products from this joint venture include non-painted door handle components and exterior trim components for OEM customers producing in North America. STRATTEC owns 51% of this joint venture and its financial results are consolidated into STRATTEC’s financial statements. In our fiscal years ending 2018 and 2017, ASdM was profitable and represented $88.8 and $67.7 million, respectively, of our consolidated net sales. STRATTEC de Mexico Plant No. 4 is in Leon, Mexico and houses our custom paint system for door handles and assembly for ADAC-STRATTEC de Mexico. This facility was operational during the second quarter of fiscal year 2018.

 

LOGO

STRATTEC has introduced the BOLT line of products, the world’s first codeable padlock. In a simple one-step process, users can code the padlock to their vehicle key. This provides significant convenience by reducing the number of keys users need to secure their lockers, storage sheds and vehicle accessories such as tool boxes, trailer hitches, etc. You can buy this product direct at www.boltlock.com.

 

 

LOGO

Interior and exterior door handles are painted in our Leon, Mexico facility.

 

2018  STRATTEC  Annual  Report    11


LOGO

COMPANY DESCRIPTION

 

 

STRATTEC POWER ACCESS LLC

During fiscal year 2009, we formed a new subsidiary with WITTE Automotive called STRATTEC POWER ACCESS LLC (SPA) to acquire the North American business of the Delphi Power Products Group. WITTE is a 20 percent minority owner. SPA in turn owns 100 percent of a Mexican subsidiary, STRATTEC POWER ACCESS de Mexico. The purpose of this subsidiary is to produce power access devices for sliding side doors, lift gates and trunk lids. STRATTEC POWER ACCESS de Mexico currently operates out of defined space in STRATTEC de Mexico Plant No. 3 located in Juarez, Mexico. Financial results for SPA are consolidated in STRATTEC’s financial statements. For fiscal years ending 2018 and 2017, SPA was profitable and represented $86.4 and $84.5 million, respectively, of our consolidated net sales.

STRATTEC ADVANCED LOGIC LLC

During the fourth quarter of fiscal year 2013, we formed a new joint venture with Actuator Systems LLC called NextLock LLC subsequently renamed STRATTEC Advanced Logic. The initial capitalization of the joint venture was $1.5 million. The purpose of this joint venture is to assemble and sell the next generation of biometric security products based upon the residential and commercial designs of Actuator Systems. This joint venture had minimal sales activity in both fiscal 2018 and 2017. During fiscal 2018, we, along with our joint venture partner, reduced operating the business of STRATTEC Advanced Logic to winding down and selling only RTS commercial biometric locks. STRATTEC owns 51% of this joint venture and its financial results are accounted for on the equity method of accounting. For further STRATTEC Advanced Logic financial information, see “Equity Earnings (Loss) of Joint Ventures” on pages 47 through 49 included in this 2018 Annual Report.

SEASONAL NATURE OF THE BUSINESS

The manufacturing of components used in automobiles is driven by the normal peaks and valleys associated with the automotive industry. Typically, the months of July and August are relatively slow as summer vacation shutdowns and model year changeovers occur at the automotive assembly plants. September volumes increase rapidly as each new model year begins. This volume strength continues through October and into early November. As the holiday and winter seasons approach, the demand for automobiles slows, as does production. March usually brings a major sales and production increase, which then continues through most of June. This results in our first fiscal quarter sales and operating results typically being our weakest, with the remaining quarters being more consistent.

ECONOMIC VALUE COMMITMENT

The underlying philosophy of our business and the means by which we measure our performance is Economic Value Added (EVA®). Simply stated, economic value is created when our business enterprise yields a return greater than the cost of capital we and our shareholders have invested in STRATTEC. The amount by which our return exceeds the cost of our capital is EVA®. In line with this philosophy, EVA® bonus plans are in effect for all of our U.S. associates, outside directors and many of our Mexico-based salaried associates as an incentive to help positively drive the economic value of our business. During fiscal 2019, we are in the process of reviewing and modifying our existing EVA® bonus plans, however, these plan changes will contain similar concepts as to return on investment and creating shareholder value.

STRATTEC’s significant market presence is the result of a 110-year commitment to creating quality products and systems that are responsive to changing needs. As technologies advance and markets grow, STRATTEC retains that commitment to meeting and exceeding the expectations of our customers, and providing economic value to our shareholders.

 

 

2018  STRATTEC  Annual  Report    12


LOGO

 

2018  STRATTEC  Annual  Report    13


LOGO

MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

The following Discussion and Analysis should be read in conjunction with STRATTEC SECURITY CORPORATION’s accompanying Financial Statements and Notes thereto. Unless otherwise indicated, all references to years or quarters refer to fiscal years or fiscal quarters of STRATTEC.

EXECUTIVE OVERVIEW

Historically, a significant portion of our total net sales are to domestic automotive OEMs (General Motors, Ford and Fiat Chrysler). During the past two decades these customers lost North American market share to the New Domestic automotive manufacturers (primarily the Japanese and Korean automotive manufacturers). In addition to our dependence on our customers’ maintaining their market share, our financial performance depends in large part on conditions in the overall automotive industry, which in turn, are dependent upon the U.S. and global economies. During fiscal years 2018, 2017 and 2016, the above domestic automotive OEMs together represented 59 percent, 60 percent and 63 percent, respectively, of our total net sales.

During fiscal years 2018 and 2017, we experienced stronger sales demand for our components from our major North American customers noted above as it relates to light trucks and both sport utility and car based utility vehicles in comparison to passenger cars, which was likely influenced by lower gas prices. If gas prices continue to remain flat or slightly higher over the next year, we anticipate this consumer buying trend will continue.

Fiscal 2018 net sales were $439 million compared to $417 million in 2017 and $401 million in 2016. Net income attributable to STRATTEC for fiscal 2018 was $12.3 million compared to $7.2 million in 2017 and $9.1 million in 2016. The financial health of our three largest customers continues to be stable. General Motors, Ford and Fiat Chrysler continued to report profitable results after implementing significant restructuring plans that modified their cost structures by closing manufacturing facilities, reducing benefits and wages and eliminating certain models and brands in 2009 and 2010. With the new United Auto Workers contracts signed in the United States during November 2015, our major customers planned to move passenger car production from the United States into Mexico over the next 3-5 years to improve their overall profitability on these vehicles. Ford and Fiat Chrysler’s plans have changed subsequent to the above contract date and have started eliminating passenger car production on certain models in North America entirely. STRATTEC and our joint venture partner ADAC Automotive just completed a new production facility in Leon, Mexico to capture these new opportunities as well as other OEM’s as it relates to painted door handles and assemblies in the expanding Mexican market.

As we look out into the future, the July 2018 projections from our third-party forecasting service indicate that North American light vehicle production will show steady to flat production for the next five years. By model year, based on these projections we are expecting a 2018 build of 16.8 million vehicles, 17.4 million vehicles for 2019, 17.3 million vehicles for 2020, 17.4 million vehicles for 2021 and 17.5 million vehicles for 2022. As part of this third party projection, General Motors Company and the Ford Motor Company are expected to experience flat vehicle production volumes in their production levels during this time period. Fiat Chrysler, however, is expected to slightly decrease production as they eliminate or reduce passenger car production on certain models during this time horizon. Of course, all of these forecasts are subject to variability based on what happens in the overall North American and global economies, especially as it relates to potential tariff enactment by the United States Government or other foreign countries, the current levels of employment, availability of consumer credit, home equity values, fluctuating fuel prices, changes in customer vehicle and option preferences, product quality issues, including related to recall and product warranty coverage issues, and other key factors that we believe could determine whether consumers can or will purchase new vehicles or particular brands.

Focus and Strategy Going Forward

STRATTEC’s long-term strategy is focused on maximizing long-term shareholder value by driving profitable growth. Our management believes productivity improvements and cost reductions are critical to our competitiveness, while enhancing the value we deliver to our customers. In order to accomplish this, we have been pursuing, and we intend to continue to pursue over the foreseeable future, the following objectives as summarized below:

 

 

Streamline and standardize processes to increase productivity and improve the quality of our products

 

 

Maintain a disciplined and flexible cost structure to leverage scale and optimize asset utilization and procurement

 

 

Maintain our strong financial position by deploying capital spending targeted for growth and productivity improvement

 

 

Leverage the “VAST Automotive Group Brand” with customer relationships to generate organic growth from global programs

 

 

Offer our customers innovative products and cost savings solutions to meet their changing demands

 

 

Explore and execute targeted mergers and acquisitions with a disciplined due diligence approach and critical financial analysis to drive shareholder value

 

 

2018  STRATTEC  Annual  Report    14


MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

We use several key performance indicators to gauge progress toward achieving these objectives. These indicators include net sales growth, operating margin improvement, return on capital employed and cash flow from operations.

RESULTS OF OPERATIONS

2018 Compared to 2017

 

    Years Ended  

                    

    July 1, 2018                      July 2, 2017

Net Sales (millions of dollars)

          $ 439.2                   $ 417.3    

Net Sales to each of our customers or customer groups in the current year and prior year were as follows (millions of dollars):

 

   

Years Ended

                      
   

July 1, 2018

                     July 2, 2017

Fiat Chrysler Automobiles

      $ 110.7               $ 100.6    

General Motors Company

        85.8                 88.6    

Ford Motor Company

           64.4                 62.3    

Tier 1 Customers

        70.5                           72.4        

Commercial and Other OEM Customers

        82.0                 60.3    

Hyundai / Kia

        25.8                 33.1    
     

 

 

               

 

 

     

Total

      $ 439.2               $ 417.3    
     

 

 

               

 

 

     

Net sales were $439.2 million in 2018 compared to $417.3 million in 2017. Sales to Fiat Chrysler Automobiles in the current year increased over the prior year due to a combination of higher vehicle production volumes and product content on the components we supply, partially offset by reduced sales during the six months ended December 31, 2017 as a result of the discontinuation of the Chrysler 200 in December 2016. The decrease in sales to General Motors Company in the current year compared to the prior year was attributed to lower production volumes and content on products we supplied to Opel Automotive GmbH as part of our General Motors business in the prior year, partially offset by increased sales attributed to higher content sales on models for which we supply components, in particular latches. We now supply products directly to Opel Automotive rather than through General Motors, which are now included under “Commercial and Other OEM Customers” above. Increased sales to Ford Motor Company in the current year as compared to the prior year was due to a combination of higher production volumes and content on components we supply. Sales to Tier 1 Customers decreased in the current year period as compared to the prior year due to lower sales on our driver controls products. Sales to Commercial and Other OEM Customers during the current year increased in comparison to the prior year due to including Opel Automotive in this category as mentioned above and new programs at Honda of America Manufacturing, Inc. and Volkswagen. These customers, along with our Tier 1 Customers, represent purchasers of vehicle access control products, such as latches, fobs, driver controls and door handles and related components, that we have developed in recent years to complement our historic core business of locks and keys. The decreased sales to Hyundai / Kia in the current year as compared to the prior year were due to lower levels of production on vehicles for which we supply components.

 

    Years Ended  

                    

    July 1, 2018                      July 2, 2017

Cost of Goods Sold (millions of dollars)

          $ 384.8                   $ 356.4    

Direct material costs are the most significant component of our cost of goods sold and comprised $245.5 million or 63.8 percent of cost of goods sold in the current year compared to $236.1 million or 66.2 percent of cost of goods sold in the prior year. This dollar value increase in our direct material costs of $9.4 million or 4.0 percent was due to increased sales volumes in the current year as compared to the prior year, partially offset by decreased sorting costs resulting from internal manufacturing process quality issues incurred in the current year as compared to the prior year as well as prior year obsolescence costs related to inventory intended for STRATTEC Advanced Logic, LLC (“SAL LLC”), our biometric joint venture.

The remaining components of cost of goods sold consist of labor and overhead costs which increased $19.0 million or 15.8 percent to $139.3 million in the current year from $120.3 million in the prior year as the variable portion of these costs increased due to the increase in sales volumes between years. Additionally, the current year as compared to the prior year included higher production and expediting costs associated with new product launches occurring in fiscal year 2018, in particular in connection with the start-up of our new door handle paint facility in Leon, Mexico, an unfavorable Mexican peso to U.S. dollar exchange rate affecting our operations in Mexico, a year over year increase in warranty expense provisions of approximately $3.5 million for expected

 

 

2018  STRATTEC  Annual  Report    15


LOGO

MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

warranty payments to be settled in future periods and an increase of approximately $840,000 in expense provisions for the accrual of bonuses between years. The fiscal 2018 bonus expense provisions include the accrual of a discretionary bonus approved by our Board of Directors as well as the accrual of bonuses under our incentive bonus plans. There was no similar discretionary bonus related to fiscal 2017. The U.S. dollar value of our Mexican operations increased approximately $1.5 million in the current year as compared to the prior year due to an unfavorable Mexican peso to U.S. dollar exchange rate between years. The average U.S. dollar / Mexican peso exchange rate decreased to approximately 18.75 pesos to the dollar in the current year from approximately 19.29 pesos to the dollar in the prior year.

 

     Years Ended       
     July 1, 2018      July 2, 2017

Gross Profit (millions of dollars)

       $54.4            $61.0  

Gross Profit as a percentage of net sales

       12.4%            14.6%  

The reduction in gross profit and gross profit as a percentage of net sales in the current year as compared to the prior year were attributed to higher than expected start-up production and expediting costs associated with new product launches occurring during the current year, in particular in connection with the opening of our new paint facility in Leon, Mexico, to meet certain customer schedules as well as an unfavorable Mexican Peso to U.S. Dollar exchange rate affecting the cost of our Mexican operations, a year over year increase in warranty expense provisions and increased expense provisions for the accrual of bonuses, all as discussed above.

Engineering, Selling and Administrative Expenses in the current year and prior year were as follows:

 

     Years Ended       
     July 1, 2018      July 2, 2017

Expenses (millions of dollars)

       $41.2            $46.1  

Expenses as a percentage of net sales

       9.4%            10.0%  

Engineering, selling and administrative expenses decreased approximately $4.9 million between years. The current year as compared to the prior year included a reduction in new product program development costs for which we utilized third party vendors for a portion of the development work. This impact was partially offset by an increase of approximately $265,000 in expense provisions for the accrual of bonuses between years. The fiscal 2018 bonus expense provisions include the accrual of a discretionary bonus approved by our Board of Directors as well as the accrual of bonuses under our incentive bonus plans. There was no similar discretionary bonus related to fiscal 2017.

Income from operations in the current year was $13.3 million compared to $14.8 million in the prior year. This decrease was the result of reduced gross profit margins during 2018 partially offset by a reduction in engineering, selling and administrative expenses in the current year as compared to the prior year, all as discussed above.

The equity earnings (loss) of joint ventures was comprised of the following in the current year and prior year (thousands of dollars):

 

     Years Ended       
     July 1, 2018      July 2, 2017

Vehicle Access Systems Technology LLC

     $ 4,441        $ 2,593

STRATTEC Advanced Logic, LLC

       91          (1,927 )
    

 

 

        

 

 

 
     $ 4,532        $ 666
    

 

 

        

 

 

 

Our Vehicle Access Systems Technology LLC (“VAST LLC”) joint ventures in China and India continue to report profitable operating results while our joint venture in Brazil continues to report losses due to our limited amount of business in that region. STRATTEC is not the primary beneficiary and does not control SAL LLC. Accordingly, our investment in SAL LLC is accounted for using the equity method. Even though we maintain a 51 percent ownership interest in SAL LLC, effective with our fiscal 2015 fourth quarter, 100 percent of the funding for SAL LLC was being made through loans from STRATTEC to SAL LLC. Therefore, STRATTEC began recognizing 100 percent of the losses of SAL LLC up to our committed financial support. During fiscal 2018, we, along with our joint venture partner, reduced operating the business of STRATTEC Advanced Logic to winding down and selling only commercial biometric locks.

 

 

2018  STRATTEC  Annual  Report    16


MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

Included in other income, net in the current year and prior year were the following items (thousands of dollars):

 

     Years Ended       
     July 1, 2018      July 2, 2017

Foreign Currency Transaction Gain

     $ 549        $ 1,128

Unrealized (Loss) Gain on Mexican Peso Forward Contracts

       (1,160 )          2,010

Realized Gain (Loss) on Mexican Peso Forward Contracts

       1,140          (1,650 )

Pension and Postretirement Plans Credit (Cost)

       447          (1,140 )

Rabbi Trust Gain

       193          296

Other

       (149 )          523
    

 

 

        

 

 

 
     $ 1,020        $ 1,167
    

 

 

        

 

 

 

Foreign currency transaction gains and losses resulted from activity associated with foreign denominated assets held by our Mexican subsidiaries. We entered into the Mexican peso currency forward contracts during fiscal 2017 and 2018 to minimize earnings volatility resulting from changes in exchange rates affecting the U.S. dollar cost of our Mexican operations. Unrealized gains and losses recognized as a result of mark-to-market adjustments as of July 1, 2018 may or may not be realized, depending upon the actual Mexican peso to U.S. dollar exchange rates experienced during the balance of the contract period. Pension and postretirement plan impacts include the components of net periodic benefit cost other than the service cost component. The Rabbi Trust assets fund our amended and restated supplemental executive retirement plan. The investments held in the Trust are considered trading securities.

Our income tax provision for the current year was impacted by the Tax Cuts and Jobs Act of 2017 (“the Act”), which was signed into law on December 22, 2017 with an effective date of January 1, 2018. The Act makes broad and complex changes to the U.S. tax code that affected our fiscal year ending July 1, 2018, including but not limited to (1) a reduction in the U.S. statutory tax rate to 21 percent following its effective date and a change in the measurement of our deferred tax assets and deferred tax liabilities resulting from the reduction in the statutory rate, (2) requiring a one-time transition tax on certain deemed repatriated earnings of foreign subsidiaries that is payable over eight years, and (3) bonus depreciation that will allow for full expensing of qualified property. Section 15 of the Internal Revenue Code stipulates that for our fiscal year ending July 1, 2018, we will have a blended statutory corporate tax rate of 28%, which is based on the applicable statutory tax rates before and after the Act and the number of days in our fiscal year.

The SEC staff issued SAB 118, which provides guidance on accounting for the tax effects of the Act. SAB 118 provides a measurement period that should not extend beyond one year from the Act’s enactment date for companies to complete the accounting under ASC 740. In accordance with SAB 118, a company must reflect the income tax effects of those aspects of the Act for which the accounting under ASC 740 is complete. To the extent that a company’s accounting for certain income tax effects of the Act is incomplete but it is still able to determine a reasonable estimate of the tax effect, it must record a provisional estimate in the financial statements. If a company cannot determine a provisional estimate to be included in the financial statements, it should continue to apply ASC 740 on the basis of the provision of the tax laws that were in effect immediately before the enactment of the Act.

In connection with our analysis of the impact of the Act, we have recorded an overall net tax benefit of approximately $3 million during 2018. This net tax benefit primarily consists of (1) the impact of the change in measurement of our deferred tax assets and liabilities, which resulted in a favorable provision impact of $1.6 million, (2) the one-time transition tax on non-previously taxed post-1986 accumulated foreign earnings, which resulted in a net favorable impact of $500,000 and includes transition tax of $1.4 million offset by the reversal of net deferred tax liability balances totaling $1.9 million which related to basis differences in foreign earnings, and (3) the impact of changing our annualized effective tax rate, which resulted in a favorable provision impact of $900,000. For various reasons that are discussed more fully below, we have not completed our accounting for the income tax effects for certain elements of the Act. However, we were able to make reasonable estimates of certain effects and, therefore, we recorded provisional adjustments of these elements in the accompanying consolidated financial statements. We identified these items as provisional since our analysis of the items is not complete.

The Act reduces the corporate tax rate to 21 percent, effective January 1, 2018. For certain of our net deferred tax assets, we have recorded a provisional adjustment to reflect the reduction in the corporate tax rate. While we are able to make a reasonable estimate of the impact of the reduction in the corporate rate, it may be affected by other analyses related to the Act, including, but not limited to, the impact of our calculation of deemed repatriation of deferred foreign income and the impact of full expensing for certain assets.

The Deemed Repatriation Transition Tax (“Transition Tax”) is a tax on previously untaxed accumulated and current earnings and profits (E&P) of certain of our foreign subsidiaries. To determine the amount of the Transition Tax, we must determine, in addition to other factors, the amount of post-1986 E&P of the relevant subsidiaries, as well as the amount of non-U.S.

 

 

2018  STRATTEC  Annual  Report    17


LOGO

MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

income taxes paid on such earnings. We were able to make a reasonable estimate of the Transition Tax and recorded a provisional Transition Tax obligation in the accompanying consolidated financial statements. However, we are continuing to gather additional information to more precisely compute the amount of the Transition Tax.

We must assess whether our valuation allowance analyses are affected by various aspects of the Act (e.g., deemed repatriation of deferred foreign income, Global Intangible Low-Taxed Income (“GILTI”) inclusions, and new categories of Foreign Tax Credits). Since, as discussed herein, we have recorded provisional amounts related to certain portions of the Act, any corresponding determination of the need for, or any change in, a valuation allowance is also provisional.

Our accounting for the following elements of the Act is incomplete, and we were not yet able to make reasonable estimates of the tax effects. Therefore, no provisional adjustments were recorded for the following elements in our accompanying consolidated financial statements.

Because of the complexity of the new GILTI tax rules, we are continuing to evaluate this provision of the Act and the application of ASC 740. Under U.S. GAAP, we are allowed to make an accounting policy choice of either (1) treating taxes due on future U.S. inclusions in taxable income related to GILTI as a current-period expense when incurred (the “period cost method”) or (2) factoring such amounts into a company’s measurement of its deferred taxes (the “deferred method”). Our selection of an accounting policy with respect to the new GILTI tax rules will depend, in part, on analyzing our global income to determine whether we expect to have future U.S. inclusions in taxable income related to GILTI and, if so, what the impact is expected to be. Because whether we expect to have future U.S. inclusions in taxable income related to GILTI depends on not only our current structure and estimated future results of global operations but also our intent and ability to modify our structure and/or our business, we are not yet able to reasonably estimate the effect of this provision of the Act. Therefore, we have not made any adjustments related to potential GILTI tax in our financial statements and have not made a policy decision regarding whether to record deferred taxes on GILTI.

Our income tax provision for 2017 was impacted by the recognition of a $424,000 deferred tax liability resulting from a change in assertion regarding the permanent reinvestment of earnings from two of our Mexican subsidiaries. Prior to our fiscal 2017 second quarter, the accumulated undistributed earnings from such subsidiaries were considered to be permanently reinvested in Mexico. Accordingly, we did not previously record deferred income taxes on these earnings in our financial statements. During our fiscal 2017 second quarter, the strength of the U.S. dollar to the Mexican peso significantly decreased the U.S. tax cost associated with a distribution from the Mexican entities as compared to the U.S. tax cost associated with such a distribution in prior periods. Consequently, we changed our assertion regarding the permanent reinvestment of earnings from these Mexican subsidiaries. Such earnings were no longer considered permanently reinvested as of January 1, 2017. As a result, we repatriated $15.8 million from Mexico to the U.S. during our fiscal 2017, recognized the deferred tax liability resulting from the change in assertion, and concluded that, with some restrictions and tax implications, the remaining current and future accumulated undistributed earnings of these subsidiaries will be available for repatriation in future periods as deemed necessary.

Additionally, our income tax provisions for 2018 and 2017 were affected by the non-controlling interest portion of our pre-tax income. The non-controlling interest impacts the effective tax rate as ADAC-STRATTEC LLC and STRATTEC POWER ACCESS LLC entities are taxed as partnerships for U.S. tax purposes.

2017 Compared to 2016

 

     Years Ended       
     July 2, 2017      July 3, 2016

Net Sales (millions of dollars)

       $417.3            $401.4  

Net Sales to each of our customers or customer groups in 2017 and 2016 were as follows

(millions of dollars):

 

     Years Ended     
     July 2, 2017      July 3, 2016

Fiat Chrysler Automobiles

     $ 100.6        $ 115.9

General Motors Company

       88.6          79.9

Ford Motor Company

       62.3          57.3

Tier 1 Customers

       72.4          67.3

Commercial and Other OEM Customers

       60.3          49.3

Hyundai / Kia

       33.1          31.7
    

 

 

        

 

 

 

Total

     $ 417.3        $ 401.4
    

 

 

        

 

 

 

Net sales were $417.3 million in 2017 compared to $401.4 million in 2016. Our 2017 fiscal year

 

 

2018  STRATTEC  Annual  Report    18


MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

was the typical 52 weeks while our 2016 fiscal year was 53 weeks. The impact of the additional week of customer shipments during 2016 increased 2016 sales by approximately $7.5 million. Sales to Fiat Chrysler Automobiles in 2017 decreased in comparison to 2016 due to lower customer vehicle production volume and lower content on components we supply, in particular on the Chrysler 200, which was discontinued in December 2016, and lower volume during 2017 on the new Chrysler Pacifica Minivan. Increased sales to General Motors Company in 2017 over 2016 was attributed to higher customer production volumes and content on vehicles for which we supply components, partially offset by agreed upon price reductions that became effective as of the start of the 2016 calendar year. Increased sales to Ford Motor Company in 2017 as compared to 2016 were attributed to increased product content on locksets and latches, in particular for the F-150 pick-up truck. Sales to Tier 1 Customers and Commercial and other OEM Customers during 2017 increased in comparison to 2016 as a result of higher electronic content and volume. These customers primarily represent purchasers of vehicle access control products, such as latches, fobs, driver controls, and door handles and related components, that have been developed in recent years to complement our historic core business of locks and keys. The increased sales to Hyundai / Kia in 2017 over 2016 were due to higher levels of production on the Kia Sedona minivan for which we supply components.

 

     Years Ended       
     July 2, 2017      July 3, 2016

Cost of Goods Sold (millions of dollars)

       $356.4          $335.7

Direct material costs are the most significant component of our cost of goods sold and comprised $236.1 million or 66.2 percent of cost of goods sold in 2017 compared to $224.9 million or 67.0 percent of cost of goods sold in 2016. This increase in our direct material costs of $11.2 million or 5.0 percent was due to increased sales volumes in 2017 as compared to 2016 and increased scrap and sorting costs resulting from internal manufacturing process quality issues incurred in 2017 as compared to 2016 as well as 2017 obsolescence costs related to inventory intended for STRATTEC Advanced Logic, LLC (“SAL LLC”), our biometric joint venture.

The remaining components of cost of goods sold consist of labor and overhead costs which increased $9.5 million or 8.6 percent to $120.3 million in 2017 from $110.8 million in 2016 as the variable portion of these costs increased due to the increase in sales volumes between years. Additionally, 2017 as compared to 2016 included higher payroll, benefit, outside service, and maintenance costs related to quality improvement initiatives undertaken during 2017, higher than expected production and expediting costs to meet certain customer schedules, higher royalty costs associated with sales of service parts to aftermarket customers, higher wage costs for our Mexico operations resulting from wage increases implemented to encourage work force retention in consideration of the peso devaluation, and start-up costs related to our new Leon, Mexico facility. These costs were partially offset by a reduction of approximately $5.8 million in the U.S. dollar value of our Mexican operations due to a favorable Mexican peso to U.S. dollar exchange rate between 2016 and 2017 as well as a reduction in warranty expense provisions between these years. The average U.S. dollar/Mexican peso exchange rate increased to approximately 19.29 pesos to the dollar in 2017 from approximately 17.22 pesos to the dollar in 2016. Warranty recoveries and expense provision reversals in 2017 totaled $843,000 compared to expense provisions of $583,000 in 2016.

 

     Years Ended       
     July 2, 2017      July 3, 2016

Gross Profit (millions of dollars)

       $61.0          $65.7

Gross Profit as a percentage of net sales

       14.6%            16.4%  

The reduction in gross profit and gross profit as a percentage of net sales in 2017 as compared to 2016 were the result of agreed upon customer price reductions that became effective at the start of the 2016 calendar year, a less favorable sales mix in 2017 as compared to 2016, which 2017 included a lower percentage of sales in the power access and OEM service product lines as compared to 2016 reducing gross profit margins in 2017, increased costs related to quality improvement initiatives undertaken during 2017, higher than expected production and expediting costs to meet certain customer schedules, higher royalty costs associated with sales of service parts to aftermarket customers, higher wage costs for our Mexican operations, and start-up costs incurred related to our new Leon, Mexico facility, all of which were partially offset by a favorable Mexican peso to U.S. dollar exchange rate affecting the

 

 

2018  STRATTEC  Annual  Report    19


LOGO

MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

cost of our Mexican operations and a reduction in warranty expense provisions during 2017 as compared to 2016, all as discussed above.

Engineering, Selling and Administrative Expenses in 2017 and 2016 were as follows:

 

     Years Ended  

    

     July 2, 2017           July 3, 2016

Expenses (millions of dollars)

   $46.1      $43.5

Expenses as a percentage of net sales

   11.0%      10.8%

Engineering, selling and administrative expenses increased approximately $2.6 million between years while 2016 included an additional week of expense as a result of the 53 week fiscal year. The increase in these costs in 2017 as compared to 2016 was due to higher new product program development costs for which we are utilizing third party vendors for a portion of the development work.

Income from operations in 2017 was $14.8 million compared to $22.2 million in 2016. This decrease was the result of reduced gross profit margins during 2017 as well as an increase in engineering, selling and administrative expenses in 2017 as compared to 2016, all as discussed above.

The equity earnings (loss) of joint ventures was comprised of the following in 2017 and 2016 (thousands of dollars):

 

     Years Ended   

    

     July 2, 2017    July 3, 2016

Vehicle Access Systems Technology LLC

     $ 2,593      $ (639 )

STRATTEC Advanced Logic, LLC

       (1,927 )        (1,596 )
    

 

 

      

 

 

 
     $ 666      $ (2,235 )
    

 

 

      

 

 

 

Our Vehicle Access Systems Technology LLC (“VAST LLC”) joint ventures in China and India reported profitable operating results in 2017 and 2016 while our joint venture in Brazil reported losses in each year due to the weak automotive build in that region. The 2016 equity loss of joint ventures for VAST LLC included a $6 million impairment charge related to its Minda-VAST Access Systems joint venture in India. STRATTEC’s portion of this impairment charge totaled $2 million. STRATTEC is not the primary beneficiary and does not control SAL LLC. Accordingly, our investment in SAL LLC is accounted for using the equity method. Even though we maintain a 51 percent ownership interest in SAL LLC, during 2017 and 2016, 100 percent of the funding for SAL LLC was being made through loans from STRATTEC to SAL LLC. Therefore, STRATTEC recognized 100 percent of the losses of SAL LLC up to our committed financial support. During fiscal 2018, we, along with our joint venture partner, reduced operating the business of STRATTEC Advanced Logic to winding down and selling only commercial biometric locks.

Included in other income (expense), net in 2017 and 2016 were the following items (thousands of dollars):

 

     Years Ended   

    

     July 2, 2017    July 3, 2016

Foreign Currency Transaction Gain

     $ 1,128      $ 2,559

Unrealized Gain (Loss) on Mexican Peso Forward Contracts

       2,010        (889 )

Realized Loss on Mexican Peso Forward Contracts

       (1,650 )        (1,196 )

Pension and Postretirement Plans Cost

       (1,140 )        (1,271 )

Rabbi Trust Gain (Loss)

       296        (41 )

Other

       523        235
    

 

 

      

 

 

 
     $  1,167      $   (603
    

 

 

      

 

 

 

Foreign currency transaction gains and losses resulted from activity associated with foreign denominated assets held by our Mexican subsidiaries. We entered into the Mexican peso currency forward contracts during fiscal 2016 and 2017 to minimize earnings volatility resulting from changes in exchange rates affecting the U.S. dollar cost of our Mexican operations. Unrealized gains and losses recognized as a result of mark-to-market adjustments as of July 2, 2017 may or may not be realized, depending upon the actual Mexican peso to U.S. dollar exchange rates experienced during the balance of the contract period. Pension and postretirement plan impacts include the components of net periodic benefit cost other than the service cost component. The Rabbi Trust assets fund our amended and restated supplemental executive retirement plan. The investments held in the Trust are considered trading securities.

 

 

2018  STRATTEC  Annual  Report    20


MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

Our effective income tax rate for 2017 was 26.1 percent compared to 26.4 percent in 2016. Our income tax provision for each of 2017 and 2016 was affected by the non-controlling interest portion of our pre-tax income. The non-controlling interest impacts the effective tax rate as ADAC-STRATTEC LLC and STRATTEC POWER ACCESS LLC entities are taxed as partnerships for U.S. tax purposes.

LIQUIDITY AND CAPITAL RESOURCES

Outstanding Receivable Balances from Major Customers

Our primary source of cash flow is from our major customers, which include Fiat Chrysler Automobiles LLC, General Motors Company and Ford Motor Company. As of the date of filing this Annual Report with the Securities and Exchange Commission, all of our customers are making payments on their outstanding accounts receivable in accordance with the payment terms included on their purchase orders. A summary of our outstanding receivable balances from our major customers as of July 1, 2018 was as follows (millions of dollars):

 

Fiat Chrysler Automobiles

     $ 19.9

General Motors Company

     $ 16.4

Ford Motor Company

     $ 7.5

Cash Balances in Mexico

We earn a portion of our operating income in Mexico. During 2017, we changed our assertion regarding the permanent reinvestment of earnings from two of our Mexican subsidiaries. Prior to 2017, the accumulated undistributed earnings from such subsidiaries were considered to be permanently reinvested in Mexico. During 2017, the strength of the U.S. dollar to the Mexican peso significantly decreased the U.S. tax cost associated with a distribution from the Mexican subsidiaries as compared to the U.S. tax cost associated with such a distribution in prior periods. Consequently, we changed our assertion regarding the permanent reinvestment of earnings from these Mexican subsidiaries. Such earnings are no longer considered permanently reinvested. We repatriated $15.8 million from Mexico to the U.S. during 2017. As of July 1, 2018, $5.7 of our $8.1 million cash and cash equivalents balance was held in Mexico. These funds are available for repatriation as deemed necessary.

Cash Flow Analysis

 

     Years Ended
    

July 1, 2018

       

July 2, 2017

       

July 3, 2016

Cash Flows from (millions of dollars):

                        

Operating Activities

     $ 6.9           $ 23.1           $ 8.2

Investing Activities

     $ (23.9 )           $ (39.5 )           $ (25.3 )

Financing Activities

     $ 16.4           $ 9.2           $ 7.2

The reduction in cash provided by operating activities between 2017 and 2018 reflected a net increase in working capital requirements between the two years of $21.6 million, with the net increase in our working capital requirements being made up of the following working capital changes (millions of dollars):

 

         Increase (Decrease) in Working Capital Requirements    
     2018         2017         Change     

Accounts Receivable

         $ 9.6                    $ 1.7                    $ 7.9          

Inventories

         $ 11.2                    $ (3.2)                   $ 14.4          

Customer Tooling

         $ 1.0                    $ 4.6                    $ (3.6)         

Other Assets

         $ 3.5                    $ 1.9                    $ 1.6          

Accounts Payable and Other Liabilities

         $ (3.7)                   $ (5.2)                   $ 1.5          

The year over year change in accounts receivable balances reflected a larger increase in accounts receivable balances during 2018 as compared to 2017. Higher sales during the fourth quarter of 2018 as compared to the fourth quarter of 2017 caused receivable balances to increase during 2018. Additionally, an increase in outstanding customer tooling billings increased the 2018 accounts receivable balances by approximately $5.2 million between years. The increase in the receivable balances during 2017 was the result of sales being more heavily weighted to the end of the fourth quarter of 2017 as compared to the fourth quarter of 2016. The year over year change in inventory reflected an increase in inventory balances during 2018, which was the result of ramping up for new customer program launches, compared to a decrease in inventory balances during 2017. Inventory balances decreased during 2017 due to lower sales of parts we supplied for certain customer vehicle programs towards the end of 2016, which increased 2017 beginning balances. The year over year change in customer tooling balances, which consisted of costs incurred for the

 

 

2018  STRATTEC  Annual  Report    21


LOGO

MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

development of tooling that will be directly reimbursed by the customer whose parts are produced from the tool, was the result of the timing of tooling development spending required to meet customer production requirements and related billings for customer reimbursements. The year over year change in other assets was the result of an increase in the income tax recoverable balance in 2018 as compared to a decrease in 2017, which changes were based on the required income tax provision, the timing and amounts of Federal, state and foreign tax payments made, and the timing of the utilization of foreign tax credits and research and development tax credits. The year over year change in the accounts payable and other liability balances, which reflected a smaller reduction in working capital requirements in 2018 as compared to 2017, resulted from increases in accounts payable balances during 2017 partially offset by the year over year change in warranty reserve balances. 2018 accounts payable balances, after adjustment for non-cash items, were relatively consistent with 2017 balances. 2017 included an increase in accounts payable balances of $7.2 million due to obtaining a change in payment terms from 30 days to 45 days with several large vendors and due to the timing of purchases and payments with our vendors based on normal payment terms. 2018 warranty reserve balances increased $2.3 million over 2017 primarily due to expense provisions for expected warranty payments to be settled in future periods while the 2017 warranty reserve balances decreased $3.7 million from 2016 balances due to $2.8 million of customer warranty payments as well as $843,000 of reversals of previously accrued balances.

Other significant cash payments impacting net cash provided by operating activities during both the current year and prior year periods included cash contributions made to our qualified pension plan and cash payments made for Federal, state and foreign income taxes. Cash contributions made to our qualified pension plan totaled $5.0 million during 2017. No cash contributions were made to our qualified pension plan during 2018. Net cash payments and recoveries for Federal, state and foreign income taxes totaled $2.5 million during 2018 compared to $318,000 during 2017.

The increase in cash provided by operating activities between 2016 and 2017 reflected a net decrease in working capital requirements between the two years of $21.7 million, with the net decrease in our working capital requirements being made up of the following working capital changes (millions of dollars):

 

     Increase (Decrease) in Working Capital Requirements
          2017         2016         Change     

Accounts Receivable

          $ 1.7           $ 5.1           $ (3.4 )     

Inventories

          $ (3.2 )           $ 3.9           $ (7.1 )     

Customer Tooling

          $ 4.6           $ 3.5           $ 1.1     

Other Assets

          $ 1.9           $ 6.0           $ (4.1 )     

Accounts Payable and Other Liabilities

          $ (5.2 )           $ 3.0           $ (8.2 )     

The year over year change in the accounts receivable balances reflected a larger increase in accounts receivable balances during 2016 as compared to the increase in 2017. Higher sales during the fourth quarter of 2016 as compared to the fourth quarter of 2015 caused receivable balances to increase during fiscal 2016. The increase in the receivable balance during 2017 was the result of sales being more heavily weighted to the end of the fourth quarter of 2017 as compared to the fourth quarter of 2016. The year over year change in inventory reflected an increase in inventory balances as of July 3, 2016, which was the result of lower sales of parts we supply for certain customer vehicle programs towards the end of fiscal 2016. The year over year change in customer tooling balances, which consisted of costs incurred for the development of tooling that will be directly reimbursed by the customer whose parts are produced from the tool, was the result of the timing of tooling development spending required to meet customer production requirements and related customer reimbursements. The year over year change in other assets was the result of a reduction in the income tax recoverable balance in 2017 as compared to an increase in the income tax recoverable balance in 2016, which changes were based on the required income tax provision and the timing and amounts of Federal and state tax payments made. The year over year change in the accounts payable and other liability balances was impacted by changes in accounts payable balances, accrued salaries and benefits balances and warranty reserve balances. The year over year change in accounts payable and accrued liability balances reflected a decrease in working capital requirements in 2017 compared to an increase in working capital requirements in 2016. 2017 included an increase in accounts payable balances of $7.2 million, due to obtaining a change in payment terms from 30 days to 45 days with several large vendors and the timing of purchases and payments with our vendors based on normal payment terms, and an increase of $1.8 million in accrued payroll and benefit liabilities mostly due to an increase in wages and benefits in Mexico, as discussed above under Analysis of Results of Operations. These impacts were partially offset by $2.8 million of customer warranty payments during 2017, which were previously accrued, as well as $843,000 of reversals during 2017 of previously accrued customer warranty accruals. 2016 included cash payments made under our incentive bonus plans of $5.2 million and $3.2 million of customer warranty payments, which were previously accrued, partially offset by an increase in accounts payable balances of $4.6 million as a result of the timing of purchases and payments with our vendors based on normal payment terms.

 

 

2018  STRATTEC  Annual  Report    22


    

MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

Other significant cash payments impacting net cash provided by operating activities during both 2017 and 2016 included cash contributions made to our qualified pension plan and cash payments made for Federal, state and foreign income taxes. Cash contributions made to our qualified pension plan totaled $5.0 million during 2017 compared to $3.0 million during 2016. Net cash payments and recoveries for Federal, state and foreign income taxes totaled $318,000 during 2017 compared to $4.7 million during 2016.

Net cash used by investing activities of $23.9 million during 2018, $39.5 million during 2017 and $25.3 million during 2016 included capital expenditures of $24.1 million, $37.0 million and $23.5 million, respectively. Capital expenditures during each year were made in support of requirements for new product programs and the upgrade and replacement of existing equipment. Capital expenditures included $2.5 million, $12.8 million and $7.0 million during 2018, 2017 and 2016, respectively for the purchase of land, equipment and the construction of a new facility in Leon, Mexico, which is used primarily to paint and assemble door handle products by ADAC-STRATTEC LLC. See further discussion related to this new facility under Future Capital Expenditures below. Net cash used by investing activities during 2018, 2017 and 2016 also included an investment in our VAST LLC joint venture of $125,000, $400,000 and $220,000, respectively. The investments were made for the purpose of funding general operating expenses for Sistema de Acesso Veicular Ltda (formerly known as VAST do Brasil). Additionally, during 2016, a $1.5 million investment in SAL LLC was made as the result of the payment on a guarantee of their debt facility. Prior to 2016, loans were made by each partner, STRATTEC, WITTE and ADAC to our joint venture, VAST LLC. The loans were made in support of VAST LLC’s purchase of the non-controlling interest in the Brazilian entity and in support of funding general operating expenses of the Brazilian entity. Repayments of outstanding loan balances totaling $300,000, $100,000 and $100,000 were made from VAST LLC to each partner during 2018, 2017 and 2016, respectively. Loans were made from STRATTEC to SAL LLC totaling $2.2 million during 2017 and $225,000 during 2016 in support of operating expenses and working capital needs.

Net cash provided by financing activities of $16.4 million during 2018 included $24.0 million of borrowings under credit facilities and $242,000 of proceeds from stock purchases and option plan exercises, partially offset by $3.0 million for repayments of borrowings under credit facilities, $2.0 million for regular quarterly dividend payments to shareholders and $2.8 million for dividend payments to non-controlling interests in our subsidiaries. Net cash provided by financing activities of $9.2 million during 2017 included $36.0 million of borrowings under credit facilities, $241,000 of proceeds from stock purchases and option plan exercises, $21,000 in excess tax benefits from option plan exercises, and $2.9 million in non-controlling interest contributions to ADAC-STRATTEC LLC in accordance with the ADAC-STRATTEC debt facility provisions, partially offset by $26 million for repayments of borrowings under credit facilities, $2.0 million for regular quarterly dividend payments to shareholders and $2.0 million for dividend payments to non-controlling interests in our subsidiaries. Net cash provided by financing activities of $7.2 million during 2016 included $26.5 million of borrowings under credit facilities, $473,000 of proceeds from stock purchases and option plan exercises and $170,000 in excess tax benefits from option plan exercises, partially offset by $16.5 million for repayments of borrowings under credit facilities, $1.9 million for regular quarterly dividend payments to shareholders and $1.6 million for dividend payments to non-controlling interests in our subsidiaries.

VAST LLC Cash Requirements

We currently anticipate that both VAST China and Minda-VAST Access Systems have adequate debt facilities in place over the next fiscal year to cover the future operating and capital requirements of each business. During 2018, 2017 and 2016, capital contributions totaling $375,000, $1.2 million and $660,000, respectively were made to VAST LLC for purposes of funding operations in Brazil. STRATTEC’s portion of the capital contributions totaled $125,000 in 2018, $400,000 in 2017 and $220,000 in 2016. We anticipate the Brazilian entity will require a capital contribution of approximately $750,000 collectively by all VAST partners to fund operations during fiscal 2019. STRATTEC’s portion of the capital contributions is anticipated to be $250,000.

ADAC-STRATTEC LLC Cash Requirements

ADAC-STRATTEC de Mexico (ASdM), a wholly owned subsidiary of ADAC-STRATTEC LLC, which is a joint venture between STRATTEC SECURITY CORPORATION and ADAC Automotive, completed the construction of a new manufacturing facility in Leon, Mexico during the current year period. Total capital expenditures required for the land, facility, paint system, and assembly equipment totaled approximately $22.5 million. See further discussion under Future Capital Expenditures included herein. In contemplation of this facility construction, effective April 27, 2016, the ADAC-STRATTEC Credit Facility was amended to increase the available borrowings under the credit facility from $10 million to $20 million. Under the terms of the amended credit agreement, a capital contribution to ADAC-STRATTEC LLC of $6 million collectively from STRATTEC and ADAC was completed during the quarter ended October 2, 2016. STRATTEC’s portion of the required capital contribution was $3.06 million. The ADAC-STRATTEC Credit Facility was further amended effective as of June 26, 2017 to increase the borrowing limit to $25 million and effective as of March 27, 2018 to increase the borrowing limit to $30 million until June 30, 2019, at which time the borrowing limit will return to $25 million.

STRATTEC Advanced Logic, LLC Cash Requirements

During all periods presented in this report, STRATTEC provided 100 percent of the financial

 

 

2018  STRATTEC  Annual  Report    23


LOGO

MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

support to fund the start-up operating losses of SAL LLC due to our partner’s inability to contribute capital to this joint venture. During fiscal 2018, we, along with our joint venture partner, reduced operating the business of STRATTEC Advanced Logic to winding down and selling only commercial biometric locks. We anticipate STRATTEC will provide minimal to no funding for SAL LLC in fiscal year 2019.

Future Capital Expenditures

We anticipate capital expenditures will be approximately $15.0 million in fiscal 2019 in support of requirements for new product programs and the upgrade and replacement of existing equipment. On March 17, 2016, ASdM purchased land in Leon, Mexico. ASdM completed the construction of a new manufacturing facility on this land during the current year. This facility is being used primarily to paint and assemble door handle products. During our second quarter of fiscal 2018, the paint system and assembly equipment was fully operational. Currently, the ADAC-STRATTEC LLC joint venture has annual net sales of approximately $88.8 million. With newly awarded customer business, we anticipate annual net sales will increase to approximately $110 million in the next fiscal year. Total capital expenditures required for the land, facility, paint system and assembly equipment totaled approximately $22.5 million. During 2018, capital expenditures for the land, facility and equipment totaled $2.5 million.

Stock Repurchase Program

Our Board of Directors has authorized a stock repurchase program to buy back outstanding shares of our common stock. Shares authorized for buy back under the program totaled 3,839,395 at July 1, 2018. A total of 3,655,322 shares have been repurchased over the life of the program through July 1, 2018, at a cost of approximately $136.4 million. No shares were repurchased during fiscal 2018 or 2017. Additional repurchases may occur from time to time and are expected to continue to be funded by cash flow from operations and current cash balances. At this time, we anticipate minimal or no stock repurchase activity in fiscal year 2019.

Credit Facilities and Guarantees

STRATTEC has a $30 million secured revolving credit facility (the “STRATTEC Credit Facility”) with BMO Harris Bank N.A. ADAC-STRATTEC LLC has a $30 million secured revolving credit facility (the “ADAC-STRATTEC Credit Facility”) with BMO Harris Bank N.A., which is guaranteed by STRATTEC. The ADAC-STRATTEC Credit Facility borrowing limit decreases to $25 million effective July 1, 2019. The credit facilities both expire August 1, 2020. Borrowings under either credit facility are secured by our U.S. cash balances, accounts receivable, inventory and fixed assets located in the U.S. Interest on borrowings under both credit facilities is at varying rates based, at our option, on LIBOR plus 1.0 percent or the bank’s prime rate. Both credit facilities contain a restrictive financial covenant that requires the applicable borrower to maintain a minimum net worth level. The ADAC-STRATTEC Credit Facility includes an additional restrictive financial covenant that requires the maintenance of a minimum fixed charge coverage ratio. The ADAC-STRATTEC Credit Facility also required that a capital contribution to ADAC-STRATTEC LLC of $6 million collectively from STRATTEC and ADAC be completed by September 30, 2016. This capital contribution was completed as required. STRATTEC’s portion of this capital contribution totaled $3.06 million. As of July 1, 2018, we were in compliance with all financial covenants required by these credit facilities. Outstanding borrowings under the STRATTEC Credit Facility totaled $23.0 million at July 1, 2018 and $16.0 million at July 2, 2017. The average outstanding borrowings and weighted average interest rate on the STRATTEC Credit Facility loans were approximately $21.7 million and 2.5 percent, respectively, during 2018. The average outstanding borrowings and weighted average interest rate on the STRATTEC Credit Facility loans were approximately $12.5 million and 1.8 percent, respectively, during 2017. Outstanding borrowings under the ADAC-STRATTEC Credit Facility totaled $28.0 million at July 1, 2018 and $14.0 million at July 2, 2017. The average outstanding borrowings and weighted average interest rate on the ADAC-STRATTEC Credit Facility loans were approximately $22.6 million and 2.5 percent, respectively, during 2018. The average outstanding borrowings and weighted average interest rate on the ADAC-STRATTEC Credit Facility loans were approximately $10.9 million and 1.8 percent, respectively, during 2017. We believe that the credit facilities are adequate, along with existing cash flows from operations, to meet our anticipated capital expenditure, working capital, dividend, and operating expenditure requirements.

Inflation and Other Changes in Prices

Over the past several years, we have been impacted by rising health care costs, which have increased our cost of associate medical coverage. A portion of these increases have been offset by plan design changes and associate wellness initiatives. We have also been impacted by increases in the market price of zinc, nickel silver, and brass and inflation in Mexico, which impacts the U. S. dollar costs of our Mexican operations. We have negotiated raw material price adjustment clauses with certain, but not all, of our customers to offset some of the market price fluctuations in the cost of zinc. We own and operate manufacturing operations in Mexico. As a result, a portion of our manufacturing costs are incurred in Mexican pesos, which causes our earnings and cash flows to fluctuate due to changes in the U.S. dollar/Mexican peso exchange rate. We executed contracts with Bank of Montreal that provided for monthly Mexican peso currency forward contracts for a portion of our estimated peso denominated operating costs.

 

 

2018  STRATTEC  Annual  Report    24


MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

Refer to the discussion of Derivative Instruments under Organization and Summary of Significant Accounting Policies included in the Notes to Financial Statements included within this 2018 Annual Report.

CONTRACTUAL OBLIGATIONS AND COMMITMENTS

Contractual obligations were as follows as of July 1, 2018 (thousands of dollars):

 

     Payments Due By Period
          Less Than              More Than
Contractual Obligation    Total    1 Year    1-3 Years    3-5 Years    5 Years

Operating Leases

     $ 1,645      $ 919      $ 586      $ 97      $ 43

Other Purchase Obligations

       13,124        9,195        3,929        -        -

Pension and Postretirement Obligations(a)

       579        579        -        -        -
    

 

 

      

 

 

      

 

 

      

 

 

      

 

 

 

Total

     $ 15,348      $ 10,693      $   4,515      $       97      $       43
    

 

 

      

 

 

      

 

 

      

 

 

      

 

 

 

(a) As disclosed in our Notes to Financial Statements, estimated cash funding related to our pension and postretirement benefit plans is expected to total $579,000 in 2019. Because the timing of funding related to these plans beyond 2019 is uncertain, and is dependent on future movements in interest rates and investment returns, changes in laws and regulations, and other variables, pension and postretirement outflows beyond 2019 have not been included in the table above.

Refer to the discussion of Commitments and Contingencies included in Notes to Financial Statements included within this 2018 Annual Report for further information related to purchase obligations.

Liabilities recognized for uncertain tax benefits of $796,000 are not presented in the table above due to uncertainty as to amounts and timing regarding future payments.

STRATTEC has a $30 million secured revolving credit facility with BMO Harris Bank N. A. ADAC-STRATTEC LLC has a $30 million secured revolving credit facility with BMO Harris Bank N.A., which is guaranteed by STRATTEC. The ADAC-STRATTEC Credit Facility limit decreases to $25 million effective July 1, 2019. Borrowings under the STRATTEC credit facility totaled $23.0 million at July 1, 2018. Borrowings under the ADAC-STRATTEC credit facility totaled $28.0 million at July 1, 2018. The credit facilities both expire on August 1, 2020.

JOINT VENTURES AND MAJORITY OWNED SUBSIDIARIES

Refer to the discussion of Investment in Joint Ventures and Majority Owned Subsidiaries and discussion of Equity Earnings (Loss) of Joint Ventures included in the Notes to Financial Statements included within this 2018 Annual Report.

OTHER MATTERS

The Affordable Care Act (“ACA”), which was enacted in 2010 and is being phased in over several years, significantly affects the provision of both health care services and benefits in the United States. The ACA may impact our cost of providing our U.S. employees and retirees with health insurance and/or benefits, and may also impact various other aspects of our business. The ACA did not have a material impact on our fiscal 2018, 2017 or 2016 financial results.

CRITICAL ACCOUNTING POLICIES

We believe the following represents our critical accounting policies:

Pension Benefits – Pension obligations and costs are developed from actuarial valuations. The determination of the obligation and expense for pension benefits is dependent on the selection of certain assumptions used by actuaries in calculating such amounts. Those assumptions are described in the accompanying Notes to Financial Statements and include, among others, the discount rate, expected long-term rate of return on plan assets, retirement age and rates of increase in compensation. We evaluate and update all of the assumptions annually on June 30, the measurement date. Refer to the accompanying Notes to Financial Statements for the impact of the pension plans on our financial statements.

We determine the discount rate used to measure plan liabilities using prevailing market rates of a large population of high-quality, non-callable, corporate bonds currently available that, if the obligation was settled at the measurement date, would provide the necessary future cash flows to pay the benefit obligation when due. Using this methodology, we determined a discount rate of 4.3 percent to be appropriate as of June 30, 2018, which is an increase of 39 percentage points from the discount rate of 3.91 percent used at June 30, 2017. The impact of this change decreased our year-end 2018 projected pension benefit obligations by approximately $4.0 million and the year-end 2018 accumulated pension benefit obligations by approximately $4.0 million. This change is also expected to decrease

 

 

2018  STRATTEC  Annual  Report    25


LOGO

MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

our 2019 pension expense by $450,000. Our pension expense increases as the discount rate decreases. Lowering our 2018 discount rate assumption by 50 basis points would have increased our 2018 pension expense by approximately $610,000.

A significant element in determining our pension expense is the expected return on plan assets. Our assumption for the expected return on plan assets is based on historical results for similar allocations among asset classes and was 5.45 percent for 2016, 2017 and 2018. This assumption decreased to 4.05 percent for 2019. The change to this assumption is expected to increase our 2019 pension expense by $1.6 million. Refer to the accompanying Notes to Financial Statements for additional information on how this rate was determined. Pension expense increases as the expected rate of return on plan assets decreases. Lowering the 2018 expected rate of return assumption for our plan assets by 50 basis points would have increased our 2018 pension expense by approximately $560,000.

The difference between the expected return and actual return on plan assets is deferred and, under certain circumstances, amortized over future years of service. Therefore, the deferral of past asset gains and losses ultimately affects future pension expense. This is also the case with changes to actuarial assumptions, including discount rate assumptions, pay rate assumptions, mortality assumptions, turnover assumptions and other demographic assumptions. As of June 30, 2018, we had $26 million of net unrecognized pension actuarial losses, which included deferred asset losses of $2 million and unrecognized postretirement actuarial losses of $1 million. These amounts represent potential future pension and postretirement expenses that would be amortized over average future service periods. The average remaining service period is about 7 years for the pension and postretirement plans.

We made no contributions to our qualified pension plan during 2018. During 2017 and 2016, we contributed $5 million and $3 million, respectively, to our qualified pension plan. As discussed in the accompanying Notes to Financial Statements, our Board of Directors approved a resolution to proceed with the termination of the qualified pension plan. We anticipate settlement to occur by the end of December 2018, which is subject to final board approval. We will contribute to the Trust Fund for the Qualified Pension Plan as necessary to ensure there are sufficient assets to provide all Qualified Pension Plan benefits as required by the PBGC. The amount of future contributions has not yet been determined. We have evaluated the potential impact of the Pension Protection Act (the “PPA”), which was passed into law on August 17, 2006, including funding stabilization relief passed subsequent to the PPA (collectively, the “Acts”), on our future pension plan funding requirements based on current market conditions. The Acts have not had and are not anticipated to have in future periods a material effect on our level of future funding requirements or on our liquidity and capital resources.

While we believe that the assumptions used to determine our pension obligations and expenses are appropriate, significant differences in the actual experience or significant changes in the assumptions may materially affect the amounts of these obligations and our related future expense for these obligations.

Liability for Uncertain Tax Positions – We are subject to income taxation in many jurisdictions around the world. Significant management judgment is required in the accounting for income tax contingencies because the outcomes are often difficult to determine. We are required to measure and recognize uncertain tax positions that we have taken or expect to take in our income tax returns. The benefit of an uncertain tax position can only be recognized in the financial statements if management concludes that it is more likely than not that the position will be sustained with the tax authorities. For a position that is likely to be sustained, the benefit recognized in the financial statements is measured at the largest amount that is greater than 50 percent likely of being realized. A reserve is established for the difference between a position taken in an income tax return and the amount recognized in the financial statements. Refer to the discussion of Income Taxes included in the Notes to Financial Statements included within this 2018 Annual Report.

Other Reserves – We have reserves such as a warranty reserve and an excess and obsolete inventory reserve. These reserves require the use of estimates and judgment with regard to risk exposure, ultimate liability and net realizable value.

Warranty Reserve – We have a warranty liability recorded related to our exposure to warranty claims in the event our products fail to perform as expected, and we may be required to participate in the repair costs incurred by our customers for such products. The recorded warranty liability balance involves judgment and estimates. Our liability estimate is based on an analysis of historical warranty data as well as current trends and information, including our customers’ recent extension or expansion of their warranty programs. Actual warranty costs might differ from estimates due to the level of actual claims varying from our claims experience and estimates and final negotiations and settlements reached with our customers. Therefore, future actual claims experience could result in changes in our estimates of the required liability. Refer to the discussion of Warranty Reserve under Organization and Summary of Significant

 

 

2018  STRATTEC  Annual  Report    26


MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

Accounting Policies included in the Notes to Financial Statements included within this 2018 Annual Report.

Excess and Obsolete Inventory Reserve – We record a reserve for excess and obsolete inventory based on historical and estimated future demand and market conditions. The reserve level is determined by comparing inventory levels of individual materials and parts to historical usage and estimated future sales by analyzing the age of the inventory in order to identify specific material and parts that are unlikely to be sold. Technical obsolescence and other known factors are also considered in evaluating the reserve level. Actual future write-offs of inventory may differ from estimates and calculations used to determine reserve levels due to changes in customer demand, changes in technology and other factors. Refer to the discussion of Inventories under Organization and Summary of Significant Accounting Policies included in the Notes to Financial Statements included within this 2018 Annual Report.

We believe the reserves discussed above are estimated using consistent and appropriate methods. However, changes to the assumptions could materially affect the recorded reserves.

NEW ACCOUNTING STANDARDS

Refer to the discussion of New Accounting Standards under Organization and Summary of Significant Accounting Policies included in the Notes to Financial Statements included within this 2018 Annual Report.

RISK FACTORS

We recognize we are subject to the following risk factors based on our operations and the nature of the automotive industry in which we operate:

Loss of Significant Customers, Vehicle Content, Vehicle Models and Market Share – Sales to General Motors Company, Ford Motor Company and Fiat Chrysler Automobiles represented approximately 57 percent of our annual net sales (based on fiscal 2018 results) and, accordingly, these customers account for a significant percentage of our outstanding accounts receivable. The contracts with these customers provide for supplying the customer’s requirements for a particular model. The contracts do not specify a specific quantity of parts. The contracts typically cover the life of a model, which averages approximately four to five years. Components for certain customer models may also be “market tested” annually. Therefore, the loss of any one of these customers, the loss of a contract for a specific vehicle model, a reduction in vehicle content, the early cancellation of a specific vehicle model, technological changes or a significant reduction in demand for certain key models could occur, and if so, could have a material adverse effect on our existing and future revenues and net income.

Our major customers also have significant under-funded legacy liabilities related to pension and postretirement health care obligations. The loss in our major customers’ North American automotive market share to the New Domestic automotive manufacturers (primarily the Japanese and Korean automotive manufacturers) and/or a significant decline in the overall market demand for new vehicles may ultimately result in severe financial difficulty for these customers, including bankruptcy. If our major customers cannot fund their operations, we may incur significant write-offs of accounts receivable, incur impairment charges or require restructuring actions.

Production Slowdowns by Customers – Our major customers and many of their suppliers were significantly impacted by the recession of 2008/2009. Many of our major customers instituted production cuts during our fiscal 2009 and 2010. While production subsequently increased after the cuts made in 2009, additional economic slowdowns could bring about new production cuts which could have a material adverse effect on our existing and future revenues and net income.

Financial Distress of Automotive Supply Base – During calendar years 2009 and 2010, deteriorating automotive industry conditions adversely affected STRATTEC and our supply base. Lower production levels at our major customers, volatility in certain raw material and energy costs and the global credit market crisis resulted in severe financial distress among many companies within the automotive supply base. During the above time frame, several automotive suppliers filed for bankruptcy protection or ceased operations. The potential continuation or renewal of financial distress within the supply base and suppliers’ inability to obtain credit from lending institutions could lead to commercial disputes and possible supply chain interruptions. In addition, the potential for future adverse industry conditions may require us to provide financial assistance or other measures to ensure uninterrupted production. The continuation or renewal of these industry conditions could have a material adverse effect on our existing and future revenues and net income.

Shortage of Raw Materials or Components Supply – In the event of catastrophic acts of nature such as fires, tsunamis, hurricanes and earthquakes or a rapid increase in production demands, either we or our customers or other suppliers may experience supply shortages of raw

 

 

2018  STRATTEC  Annual  Report    27


LOGO

MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

materials or components. This could be caused by a number of factors, including a lack of production line capacity or manpower or working capital constraints. In order to manage and reduce the costs of purchased goods and services, we and others within our industry have been rationalizing and consolidating our supply base. As a result, there is greater dependence on fewer sources of supply for certain components and materials used in our products, which could increase the possibility of a supply shortage of any particular component. If any of our customers experience a material supply shortage, either directly or as a result of supply shortages at another supplier, that customer may halt or limit the purchase of our products. Similarly, if we or one of our own suppliers experience a supply shortage, we may become unable to produce the affected products if we cannot procure the components from another source. Such production interruptions could impede a ramp-up in vehicle production and could have a material adverse effect on our business, results of operations and financial condition.

We consider the production capacities and financial condition of suppliers in our selection process, and expect that they will meet our delivery requirements. However, there can be no assurance that strong demand, capacity limitations, shortages of raw materials, labor disputes or other problems will not result in any shortages or delays in the supply of components to us.

Cost Reduction – There is continuing pressure from our major customers to reduce the prices we charge for our products. This requires us to generate cost reductions, including reductions in the cost of components purchased from outside suppliers. If we are unable to generate sufficient production cost savings in the future to offset pre-programmed price reductions, our gross margin and profitability will be adversely affected.

Cyclicality and Seasonality in the Automotive Market – The automotive market is cyclical and is dependent on consumer spending, on the availability of consumer credit and to a certain extent, on customer sales incentives. Economic factors adversely affecting consumer demand for automobiles and automotive production, such as rising fuel costs, could adversely impact our net sales and net income. We typically experience decreased sales and operating income during the first fiscal quarter of each year due to the impact of scheduled customer plant shut-downs in July and new model changeovers during that period.

Foreign Operations – We own and operate manufacturing operations in Mexico. As discussed above under “Joint Ventures and Majority Owned Subsidiaries”, we also have joint venture and majority owned investments in Mexico, Brazil, China and India. As these operations continue to expand, their success will depend, in part, on our and our partners’ ability to anticipate and effectively manage certain risks inherent in international operations, including: enforcing agreements and collecting receivables through certain foreign legal systems, payment cycles of foreign customers, compliance with foreign tax laws, general economic and political conditions in these countries and compliance with foreign laws and regulations. The success of these joint venture operations may be impacted by our partners’ ability to influence business decisions and therefore the operating results of the joint ventures could be adversely impacted. These influences, as well as conflicts or disagreements with our joint venture partners, could negatively impact the operations and financial results of our joint venture investments, which could have an adverse impact on our financial results. In addition, failure of our partners to be able to continue to fund their portion of the joint venture operations could have a material adverse effect on the financial condition and financial results of our joint venture investments, which could have a material adverse effect on our financial results. The joint venture investments in China generated losses in 2012 and 2013 due to relocation costs associated with moves to a new facility and start-up costs associated with a new product line. These relocation costs and start-up costs have been financed internally and externally by VAST China. Additionally, our VAST LLC joint venture in Brazil continues to report losses due to the weak automotive build in that region. The impact of any future planned capital expenditures or future expansion by VAST LLC in China, Brazil and India, may result in the need for additional future capital contributions to fund the operations of these joint venture investments.

Cross-border Trade Issues or Tariffs – Our business is impacted by international or cross-border trade, including the import and export of products and goods into and out of the United States and trade tensions among nations. The shipping of goods across national borders is often more expensive and complicated than domestic shipping. Customs and duty procedures and reviews, including duty-free thresholds in various key markets, the application of tariffs, and security related governmental processes at international borders, may increase costs, discourage cross-border purchases, delay transit and create shipping uncertainties. Further, uncertainties stemming from changes in U.S. trade policies, tariffs and the reaction of other countries thereto, could have an adverse effect on our business and may adversely impact our

 

 

2018  STRATTEC  Annual  Report    28


MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

results of operations or financial condition or reduce profitability on certain of our products.

Currency Exchange Rate Fluctuations – Our sales are denominated in U.S. dollars. We have manufacturing operations in Mexico, and as a result, a portion of our manufacturing costs are incurred in Mexican pesos. Therefore, fluctuations in the U.S. dollar/Mexican peso exchange rate may have a material effect on our profitability, cash flows, financial position, and may significantly affect the comparability of our results between financial periods. Any depreciation in the value of the U.S. dollar in relation to the value of the Mexican peso will adversely affect the cost of our Mexican operations when translated into U.S. dollars. Similarly, any appreciation in the value of the U.S. dollar in relation to the value of the Mexican peso will decrease the cost of our Mexican operations when translated into U.S. dollars.

Sources of and Fluctuations in Market Prices of Raw Materials – Our primary raw materials are high-grade zinc, brass, nickel silver, aluminum, steel and plastic resins. These materials are generally available from a limited number of suppliers, but we have chosen to concentrate our sourcing with one primary vendor for each commodity or purchased component. We believe our sources of raw materials are reliable and adequate for our needs. However, the development of future sourcing issues related to using existing or alternative raw materials and the global availability of these materials as well as significant fluctuations in the market prices of these materials may have an adverse effect on our financial results if the increased raw material costs cannot be recovered from our customers.

Given the significant financial impact on us relating to changes in the cost of our primary raw materials, commencing with fiscal 2008 and thereafter, we began quoting quarterly material price adjustments for changes in our zinc costs in our negotiations with our customers. Our success in obtaining these quarterly price adjustments in our customer contracts is dependent on separate negotiations with each customer. It is not a standard practice for our customers to include such price adjustments in their contracts. We have been successful in obtaining quarterly price adjustments in some of our customer contracts. However, we have not been successful in obtaining the adjustments with all of our customers.

Disruptions Due to Work Stoppages and Other Labor Matters – Our major customers and many of their suppliers have unionized work forces. Work stoppages or slow-downs experienced by our customers or their suppliers could result in slow-downs or closures of assembly plants where our products are included in assembled vehicles. For example, strikes by a critical supplier called by the United Auto Workers led to extended shut-downs of most of General Motors’ North American assembly plants in February 2008 and in 1998. A material work stoppage experienced by one or more of our customers could have an adverse effect on our business and our financial results. In addition, all production associates at our Milwaukee facility are unionized. A sixteen-day strike by these associates in June 2001 resulted in increased costs as all salaried associates worked with additional outside resources to produce the components necessary to meet customer requirements. The current contract with our unionized associates is effective through September 17, 2018. We may encounter further labor disruption and we may also encounter unionization efforts in our other plants or other types of labor conflicts, any of which could have an adverse effect on our business and our financial results. Labor contracts between General Motors Company, Ford Motor Company and Fiat Chrysler Automobiles and their unionized associates under the United Auto Workers union expire in October and November 2019. In addition, their respective labor agreements with the Canadian auto workers union expire in September and October 2020. Labor disruptions encountered by our customers during the contract period could have an adverse effect on our business and our financial results.

Compliance Related to Regulations Related to Conflict Minerals – We are required to disclose the use of tin, tantalum, tungsten and gold (collectively, “conflict minerals”) mined from the Democratic Republic of the Congo and adjoining countries (the “covered countries”) if a conflict mineral(s) is necessary to the functionality of a product manufactured, or contracted to be manufactured, by us. We may determine, as part of our compliance efforts, that certain products or components we obtain from our suppliers could contain conflict minerals. If we are unable to conclude that all our products are free from conflict minerals originating from covered countries, this could have a negative

 

 

2018  STRATTEC  Annual  Report    29


LOGO

MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

impact on both our existing and future business, reputation and/or results of operations. We may also encounter challenges to satisfy customers who require that our products be certified as conflict free, which could place us at a competitive disadvantage if we are unable to substantiate such a claim. Compliance with these rules could also affect the sourcing and availability of some of the minerals used in the manufacture of products or components we obtain from our suppliers, including our ability to obtain products or components in sufficient quantities and/or at competitive prices to sell to our customers.

Environmental, Safety and Other Regulations – We are subject to Federal, state, local and foreign laws and other legal requirements related to the generation, storage, transport, treatment and disposal of materials as a result of our manufacturing and assembly operations. These laws include, among others, the Resource Conservation and Recovery Act (as amended), the Clean Air Act (as amended) and the Comprehensive Environmental Response, Compensation and Liability Act (as amended). We have an environmental management system that is ISO-14001 certified. We believe that our existing environmental management system is adequate for current and anticipated operations and we have no current plans for substantial capital expenditures in the environmental area. An environmental reserve was established in 1995 for estimated costs to remediate a site at our Milwaukee facility. The site was contaminated from a former above-ground solvent storage tank, located on the east side of the facility. The contamination occurred in 1985 and is being monitored in accordance with Federal, state and local requirements. We do not currently anticipate any material adverse impact on our results of operations, financial condition or competitive position as a result of compliance with Federal, state, local and foreign environmental laws or other related legal requirements. However, risk of environmental liability and changes associated with maintaining compliance with environmental laws is inherent in the nature of our business and there is no assurance that material liabilities or changes could not arise.

Highly Competitive Automotive Supply Industry – The automotive component supply industry is highly competitive. Some of our competitors are companies, or divisions or subsidiaries of companies, that are larger than STRATTEC and have greater financial, global and technology capabilities. Our products may not be able to compete successfully with the products of these other companies, which could result in loss of customers and, as a result, decreased sales and profitability. Some of our major customers have previously announced that they will be reducing their supply base. This could potentially result in the loss of these customers and consolidation within the supply base. The loss of any of our major customers could have a material adverse effect on our existing and future net sales and net income.

In addition, our competitive position in the North American automotive component supply industry could be adversely affected in the event that we are unsuccessful in making strategic investments, acquisitions or alliances or in establishing joint ventures that would enable us to expand globally, in particular, with the VAST Automotive Group and their ability to fund and service global vehicle platforms. We principally compete for new business at the beginning of the development of new models and upon the redesign of existing models by our major customers. New model development generally begins two to five years prior to the marketing of such new models to the public. The failure to obtain new business on new models or to retain or increase business on redesigned existing models could adversely affect our business and financial results. In addition, as a result of relatively long lead times for many of our components, it may be difficult in the short-term for us to obtain new sales to replace any unexpected decline in the sale of existing products. Finally, we may incur significant product development expense in preparing to meet anticipated customer requirements which may not be recovered.

Program Volume and Pricing Fluctuations – We incur costs and make capital expenditures for new program awards based upon certain estimates of production volumes over the anticipated program life for certain vehicles. While we attempt to establish the price of our products for variances in production volumes, if the actual production of certain vehicle models is significantly less than planned, our net sales and net income may be adversely affected. We cannot predict our customers’ demands for the products we supply either in the aggregate or for particular reporting periods.

Investments in Customer Program Specific Assets – We make investments in machinery and equipment used exclusively to manufacture products for specific customer programs. This machinery and equipment is capitalized and depreciated over the expected useful life of each respective asset. Therefore, the loss of any one of our major customers, the loss of specific vehicle models or the early cancellation of a vehicle model could result in impairment in the value of these assets which may have a material adverse effect on our financial results.

 

 

2018  STRATTEC  Annual  Report    30


MANAGEMENT’S DISCUSSION AND ANALYSIS

 

 

STRATTEC Advanced Logic, LLC Joint Venture – As discussed under Investment in Joint Ventures and Majority Owned Subsidiaries included herein in our Notes to Financial Statements, we maintain a 51 percent ownership interest in a joint venture, STRATTEC Advanced Logic, LLC, which was formed to introduce a new generation of biometric security products based upon the designs of Actuator Systems LLC, our partner and the owner of the remaining ownership interest in SAL LLC. The success of this joint venture operation has been adversely impacted by the failure of our partner to be able to continue to fund their portion of the joint venture operations, which has had an adverse impact on our financial results. Furthermore, conflicts or disagreements with our joint venture partner, could negatively impact the operations and financial results of our joint venture investment, which could have an adverse impact on our financial results. The biometric security business is highly competitive. Some of the companies in the biometric security business are significantly larger than SAL LLC and have greater financial and technology capabilities. Our products may not be able to compete successfully both on price and technology features within our markets. As a result of some of these factors, during fiscal 2018, we, along with our joint venture partner, reduced operating the business of STRATTEC Advanced Logic to winding down and selling only commercial biometric locks.

Warranty Claims – We are exposed to warranty claims in the event that our products fail to perform as expected, and we may be required to participate in the repair costs incurred by our customers for such products. Our largest customers have recently extended and/or expanded their warranty protection for their vehicles. Other automotive OEMs have similarly extended and/or expanded their warranty programs. We are engaged in ongoing discussions with our customers regarding warranty information and potential claims. The results of these discussions could result in additional warranty charges/claims in future periods. Depending on the nature of and the volume of vehicles involved in the potential warranty claims, these charges could be material to our financial statements. The extended and/or expanded warranty trend may also result in higher cost recovery claims by OEMs from suppliers whose products incur a higher rate of warranty claims above an OEM derived nominal level. Prior to fiscal 2010, we had experienced relatively low warranty charges from our customers due to our commercial arrangements and improvements in the quality, reliability and durability of our products. Due to our largest customers’ extension and/or expansion of their warranty protection programs and demands for higher warranty cost sharing arrangements from their suppliers in their terms and conditions of purchase, including from STRATTEC, we increased our provision to cover warranty exposures since fiscal year 2010. In 2015 and 2018, our increased warranty provision was the result of various known or expected customer warranty issues outstanding and estimated future warranty costs to be incurred as of June 2015 and June 2018, respectively, for which amounts were reasonably estimable. As additional information becomes available, actual results may differ from recorded estimates. If our customers demand higher warranty-related cost recoveries, or if our products fail to perform as expected, it could have a material adverse impact on our results of operations and financial condition.

Cyber Vulnerability – Cyber attacks or security breaches could compromise confidential, business critical information, cause a disruption in our operations or harm our reputation. While we have a cyber security monitoring program, a significant cyber attack could result in loss of critical business information and/or could negatively impact our operations, any of which could have a negative impact on our financial results.

Income Taxes – We are a U.S.-based multinational company subject to tax in multiple U.S. and foreign tax jurisdictions. Significant judgement is required in determining our global provision for income taxes, deferred tax assets or liabilities and in evaluating our tax positions on a worldwide basis. While we believe our tax positions are consistent with the tax laws in the jurisdictions in which we conduct our business, it is possible that these positions may be overturned by jurisdictional tax authorities, which may have a significant impact on our global provision for income taxes. Tax laws are dynamic and subject to change as new laws are passed and new interpretations of the law are issued or applied. We are also subject to ongoing tax audits. These audits can involve complex issues, which may require an extended period of time to resolve and can be highly subjective. Tax authorities may disagree with certain tax reporting positions taken by us and, as a result, assess additional taxes against us. We regularly assess the likely outcomes of these audits in order to determine the appropriateness of our tax provision.

 

 

2018  STRATTEC  Annual  Report    31


LOGO

CONSOLIDATED STATEMENTS OF INCOME AND

COMPREHENSIVE INCOME (LOSS) (IN THOUSANDS, EXCEPT PER SHARE AMOUNTS)

 

 

 

                                   Years  Ended                                
     July 1, 2018     July 2, 2017     July 3, 2016  

NET SALES

      $ 439,195        $ 417,325        $ 401,419  

Cost of goods sold

        384,752          356,370          335,693  
     

 

 

      

 

 

      

 

 

 

GROSS PROFIT

                   54,443                     60,955                     65,726  

Engineering, selling, and administrative expenses

        41,168          46,113          43,547  
     

 

 

      

 

 

      

 

 

 

INCOME FROM OPERATIONS

        13,275          14,842          22,179  

Interest income

        8          136          25  

Equity earnings (loss) of joint ventures

        4,532          666          (2,235

Interest expense

        (1,137        (417        (176

Other income (expense), net

        1,020          1,167          (603
     

 

 

      

 

 

      

 

 

 

INCOME BEFORE PROVISION FOR INCOME TAXES AND NON-CONTROLLING INTEREST

        17,698          16,394          19,190  

Provision for income taxes

        2,070          4,284          5,068  
     

 

 

      

 

 

      

 

 

 

NET INCOME

        15,628          12,110          14,122  

Net income attributable to non-controlling interest

        3,345          4,913          4,973  
     

 

 

      

 

 

      

 

 

 

NET INCOME ATTRIBUTABLE TO STRATTEC SECURITY CORPORATION

      $ 12,283        $ 7,197        $ 9,149  
     

 

 

      

 

 

      

 

 

 

COMPREHENSIVE INCOME:

               

NET INCOME

      $ 15,628        $ 12,110        $ 14,122  

Currency translation adjustments, net of tax

        (2,219        (426        (5,248

Pension and postretirement plan funded status adjustment, net of tax

        602          5,768          (5,880
     

 

 

      

 

 

      

 

 

 

TOTAL OTHER COMPREHENSIVE (LOSS) INCOME

        (1,617        5,342          (11,128
     

 

 

      

 

 

      

 

 

 

COMPREHENSIVE INCOME

        14,011          17,452          2,994  

Comprehensive income attributable to non-controlling interest

        2,279          5,470          4,659  
     

 

 

      

 

 

      

 

 

 

COMPREHENSIVE INCOME (LOSS) ATTRIBUTABLE TO STRATTEC SECURITY CORPORATION

      $ 11,732        $ 11,982        $ (1,665
     

 

 

      

 

 

      

 

 

 

EARNINGS PER SHARE ATTRIBUTABLE TO STRATTEC SECURITY CORPORATION:

               

BASIC

      $ 3.39        $ 2.01        $ 2.55  
     

 

 

      

 

 

      

 

 

 

DILUTED

      $ 3.32        $ 1.96        $ 2.51  
     

 

 

      

 

 

      

 

 

 

AVERAGE SHARES OUTSTANDING:

               

BASIC

        3,628          3,588          3,559  

DILUTED

        3,703          3,670          3,621  

 

 

The accompanying Notes to Financial Statements are an integral part of these Consolidated Statements of Income and Comprehensive Income (Loss).

 

 

2018  STRATTEC  Annual  Report    32


CONSOLIDATED BALANCE SHEETS

(IN THOUSANDS, EXCEPT SHARE AMOUNTS AND PER SHARE AMOUNTS)

 

 

    

July 1, 2018

          

July 2, 2017

 

ASSETS

           

CURRENT ASSETS:

           

Cash and cash equivalents

     $ 8,090          $ 8,361  

Receivables, less allowance for doubtful accounts of $500 at July 1, 2018 and July 2, 2017

                73,832                64,933  

Inventories, net

       46,654                     35,476  

Customer tooling in progress, net

       12,514            11,544  

Income taxes recoverable

       3,559            1,987  

Other current assets

       6,454            6,704  
    

 

 

        

 

 

 

Total current assets

       151,103            129,005  

INVESTMENT IN JOINT VENTURES

       22,192            16,840  

DEFERRED INCOME TAXES

       -            256  

OTHER LONG-TERM ASSETS

       17,338            16,022  

PROPERTY, PLANT AND EQUIPMENT, NET

       116,542            111,591  
    

 

 

        

 

 

 
     $ 307,175          $ 273,714  
    

 

 

        

 

 

 

LIABILITIES AND SHAREHOLDERS’ EQUITY

CURRENT LIABILITIES:

           

Accounts payable

     $ 38,439          $ 39,679  

Accrued liabilities:

           

Payroll and benefits

       13,393            13,055  

Environmental

       1,291            1,308  

Warranty

       7,800            5,550  

Other

       7,870            8,303  
    

 

 

        

 

 

 

Total current liabilities

       68,793            67,895  

COMMITMENTS AND CONTINGENCIES – see note beginning on page 50

           

BORROWINGS UNDER CREDIT FACILITIES

       51,000            30,000  

DEFERRED INCOME TAXES

       961            -  

ACCRUED PENSION OBLIGATIONS

       1,553            1,492  

ACCRUED POSTRETIREMENT OBLIGATIONS

       826            1,003  

OTHER LONG-TERM LIABILITIES

       796            610  

SHAREHOLDERS’ EQUITY:

           

Common stock, authorized 12,000,000 shares, $.01 par value, issued 7,251,937 shares at July 1, 2018 and 7,216,103 shares at July 2, 2017

       73            72  

Capital in excess of par value

       95,140            93,813  

Retained earnings

       236,162            225,913  

Accumulated other comprehensive loss

       (33,439          (32,888

Less: Treasury stock at cost (3,616,734 shares at July 1, 2018 and 3,619,487 shares at July 2, 2017)

       (135,778          (135,822
    

 

 

        

 

 

 

Total STRATTEC SECURITY CORPORATION shareholders’ equity

       162,158            151,088  

Non-controlling interest

       21,088            21,626  
    

 

 

        

 

 

 

Total shareholders’ equity

       183,246            172,714  
    

 

 

        

 

 

 
     $ 307,175          $ 273,714  
    

 

 

        

 

 

 

 

The accompanying Notes to Financial Statements are an integral part of these Consolidated Balance Sheets.

 

 

2018  STRATTEC  Annual  Report    33


LOGO

 

CONSOLIDATED STATEMENTS OF

 

SHAREHOLDERS’ EQUITY (IN THOUSANDS, EXCEPT PER SHARE AMOUNTS)

 

 

    Total   Common
Stock
 

Capital in

Excess of
Par Value

  Retained
Earnings
 

Accumulated
Other

Comprehensive
Loss

  Treasury
Stock
  Non-Controlling
Interest

BALANCE June 28, 2015

    $ 152,401     $ 71     $ 89,560     $ 213,442     $ (26,859 )     $ (135,902 )     $ 12,089
   

 

 

     

 

 

     

 

 

     

 

 

     

 

 

     

 

 

     

 

 

 

Net income

      14,122       -       -       9,149       -       -       4,973

Currency translation adjustments

      (5,248 )       -       -       -       (4,934 )       -       (314 )

Pension and postretirement funded status adjustment, net of tax of $3,454

      (5,880 )       -       -       -       (5,880 )       -       -

Cash dividends declared ($0.52 per share)

      (1,863 )       -       -       (1,863 )       -       -       -

Cash dividends paid to non-controlling interests of subsidiaries

      (1,568 )       -       -       -       -       -       (1,568 )

Stock-based compensation and shortfall tax benefit

      2,075       -       2,075       -       -       -       -

Stock option exercises

      364       1       363       -       -       -       -

Employee stock purchases

      109       -       78       -       -       31       -
   

 

 

     

 

 

     

 

 

     

 

 

     

 

 

     

 

 

     

 

 

 

BALANCE July 3, 2016

    $ 154,512     $ 72     $ 92,076     $ 220,728     $ (37,673 )     $ (135,871 )     $ 15,180
   

 

 

     

 

 

     

 

 

     

 

 

     

 

 

     

 

 

     

 

 

 

Net income

      12,110       -       -       7,197       -       -       4,913

Currency translation adjustments

      (426 )       -       -       -       (983 )       -       557

Pension and postretirement funded status adjustment, net of tax of $3,388

      5,768       -       -       -       5,768       -       -

Cash dividends declared ($0.56 per share)

      (2,012 )       -       -       (2,012 )       -       -       -

Cash dividends paid to non-controlling interests of subsidiaries

      (1,964 )       -       -       -       -       -       (1,964 )

Contribution from non-controlling interests of subsidiaries

      2,940       -       -       -       -       -       2,940

Stock-based compensation and shortfall tax benefit

      1,601       -       1,601       -       -       -       -

Stock option exercises

      79       -       79       -       -       -       -

Employee stock purchases

      106       -       57       -       -       49       -
   

 

 

     

 

 

     

 

 

     

 

 

     

 

 

     

 

 

     

 

 

 

BALANCE July 2, 2017

    $ 172,714     $ 72     $ 93,813     $ 225,913     $ (32,888 )     $ (135,822 )     $ 21,626
   

 

 

     

 

 

     

 

 

     

 

 

     

 

 

     

 

 

     

 

 

 

Net income

      15,628       -       -       12,283       -       -       3,345

Currency translation adjustments

      (2,219 )       -       -       -       (1,153 )       -       (1,066 )

Pension and postretirement funded status adjustment, net of tax of $340

      602       -       -       -       602       -       -

Cash dividends declared ($0.56 per share)

      (2,034 )       -       -       (2,034 )       -       -       -

Cash dividends paid to non-controlling interests of subsidiaries

      (2,817 )       -       -       -       -       -       (2,817 )

Stock-based compensation

      1,130       -       1,130       -       -       -       -

Stock option exercises

      140       1       139       -       -       -       -

Employee stock purchases

      102       -       58       -       -       44       -
   

 

 

     

 

 

     

 

 

     

 

 

     

 

 

     

 

 

     

 

 

 

BALANCE July 1, 2018

    $ 183,246     $ 73     $ 95,140     $ 236,162     $ (33,439 )     $ (135,778 )     $ 21,088
   

 

 

     

 

 

     

 

 

     

 

 

     

 

 

     

 

 

     

 

 

 

 

The accompanying Notes to Financial Statements are an integral part of these Consolidated Statements of Shareholders’ Equity.

 

 

2018  STRATTEC  Annual  Report    34


CONSOLIDATED STATEMENTS OF CASH FLOWS

(IN THOUSANDS)

 

 

 

                                    Years Ended                                
    

July 1, 2018

          

July 2, 2017

          

July 3, 2016

 
CASH FLOWS FROM OPERATING ACTIVITIES                                                       

Net Income

      $ 15,628           $ 12,110           $ 14,122  

Adjustments to reconcile net income to net cash provided by operating activities:

                     

Equity (earnings) loss of joint ventures

        (4,532           (666           2,235  

Depreciation and amortization

        14,585             11,418             10,121  

Foreign currency transaction gain

        (549           (1,128           (2,559

Unrealized loss (gain) on peso forward contracts

        1,160             (2,010           889  

(Gain) loss on disposition of property, plant and equipment

        (28           213             (17

Deferred income taxes

        1,029             1,851             3,027  

Stock based compensation expense

        1,130             1,508             1,625  

Change in operating assets and liabilities:

                     

Receivables

        (9,571           (1,707           (5,129

Inventories

        (11,178           3,207             (3,897

Other assets

        (4,457           (6,499           (9,481

Accounts payable and accrued liabilities

        3,749             5,168             (3,003

Other, net

        (26           (323           285  
     

 

 

         

 

 

         

 

 

 

Net cash provided by operating activities

        6,940             23,142             8,218  
     

 

 

         

 

 

         

 

 

 
CASH FLOWS FROM INVESTING ACTIVITIES                      

Investment in joint ventures

        (125           (400           (1,720

Loan to joint ventures

        -             (2,230           (225

Repayments from loan to joint ventures

        300             100             100  

Additions to property, plant and equipment

        (24,134           (37,010           (23,496

Proceeds received on sale of property, plant and equipment

        41             2             76  
     

 

 

         

 

 

         

 

 

 

Net cash used in investing activities

        (23,918           (39,538           (25,265
     

 

 

         

 

 

         

 

 

 

CASH FLOWS FROM FINANCING ACTIVITIES

                     

Borrowings under credit facilities

        24,000             36,000             26,500  

Repayments under credit facilities

        (3,000           (26,000           (16,500

Exercise of stock options and employee stock purchases

        242             241             473  

Excess tax benefits from stock-based compensation

        -             21             170  

Contribution from non-controlling interest of subsidiaries

        -             2,940             -  

Dividends paid to non-controlling interests of subsidiaries

        (2,817           (1,964           (1,568

Dividends paid

        (2,034           (2,012           (1,865
     

 

 

         

 

 

         

 

 

 

Net cash provided by financing activities

        16,391             9,226             7,210  
     

 

 

         

 

 

         

 

 

 

FOREIGN CURRENCY IMPACT ON CASH

        316             54             (381
     

 

 

         

 

 

         

 

 

 
NET DECREASE IN CASH AND CASH EQUIVALENTS         (271           (7,116           (10,218

CASH AND CASH EQUIVALENTS

                     

Beginning of year

        8,361             15,477             25,695  
     

 

 

         

 

 

         

 

 

 

End of year

      $ 8,090           $ 8,361           $ 15,477  
     

 

 

         

 

 

         

 

 

 
SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION                      

CASH PAID DURING THE PERIOD FOR:

                     

Income taxes

      $ 2,503           $ 318           $ 4,699  

Interest

      $ 1,078           $ 350           $ 157  

NON-CASH INVESTING ACTIVITIES:

                     

Change in capital expenditures in accounts payable

      $ (1,702         $ (99         $ 2,625  

Guarantee of joint venture revolving credit facility

      $ -           $ -           $ 505  

The accompanying Notes to Financial Statements are an integral part of these Consolidated Statements of Cash Flows.

 

 

2018  STRATTEC  Annual  Report    35


LOGO

NOTES TO FINANCIAL STATEMENTS

 

 

ORGANIZATION AND SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

STRATTEC SECURITY CORPORATION designs, develops, manufactures and markets automotive access control products including mechanical locks and keys, electronically enhanced locks and keys, steering column and instrument panel ignition lock housings, latches, power sliding side door systems, power lift gate systems, power deck lid systems, door handles and related products for primarily North American automotive customers. We also supply global automotive manufacturers through a unique strategic relationship with WITTE Automotive (“WITTE”) of Velbert, Germany and ADAC Automotive (“ADAC”) of Grand Rapids, Michigan. Under this relationship, STRATTEC, WITTE and ADAC market the products of each company to global customers under the “VAST Automotive Group” brand name (as more fully described herein). STRATTEC products are shipped to customer locations in the United States, Canada, Mexico, Europe, South America, Korea, China and India, and we provide full service and aftermarket support for each VAST Automotive Group partner’s products. We also maintain a 51 percent interest in a joint venture, STRATTEC Advanced Logic, LLC (“SAL LLC”), which exists to introduce a new generation of biometric security products based on the designs of Actuator Systems, our partner and the owner of the remaining ownership interest.

The accompanying consolidated financial statements reflect the consolidated results of STRATTEC SECURITY CORPORATION, its wholly owned Mexican subsidiary, STRATTEC de Mexico, and its majority owned subsidiaries, ADAC-STRATTEC, LLC and STRATTEC POWER ACCESS LLC. STRATTEC SECURITY CORPORATION is located in Milwaukee, Wisconsin. STRATTEC de Mexico is located in Juarez, Mexico. ADAC-STRATTEC, LLC and STRATTEC POWER ACCESS LLC have operations in El Paso, Texas and Juarez and Leon, Mexico. Equity investments in Vehicle Access Systems Technology LLC (“VAST LLC”) and SAL LLC, for which we exercise significant influence but do not control and are not the primary beneficiary, are accounted for using the equity method. VAST LLC consists primarily of three wholly owned subsidiaries in China, one wholly owned subsidiary in Brazil and one joint venture entity in India. The results of the VAST LLC foreign subsidiaries and joint venture are reported on a one-month lag basis. SAL LLC is located in El Paso, Texas. We have only one reporting segment.

The significant accounting policies followed in the preparation of these financial statements, as summarized in the following paragraphs, are in conformity with accounting principles generally accepted in the United States of America (U.S. GAAP).

Principles of Consolidation and Presentation: The accompanying consolidated financial statements include the accounts of STRATTEC SECURITY CORPORATION, its wholly owned Mexican subsidiary and its majority owned subsidiaries. Equity investments for which STRATTEC exercises significant influence but does not control and is not the primary beneficiary are accounted for using the equity method. All significant inter-company transactions and balances have been eliminated.

New Accounting Standards: In May 2014, the FASB issued an update to the accounting guidance for the recognition of revenue arising from contracts with customers. The update supersedes most current revenue recognition guidance and outlines a single comprehensive model for revenue recognition based on the principle that an entity should recognize revenue in an amount that reflects the expected consideration to be received in the exchange of goods and services. The guidance update also requires additional disclosure about the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts. The guidance permits two methods of adoption: the full retrospective method, which requires retrospective restatement of each prior reporting period presented, or the modified retrospective method, which requires the cumulative effect of initially applying the guidance be recognized at the date of initial application. We do not expect the adoption of this standard to have a material impact on our results of operations or financial position; however, we expect to expand disclosures in line with the requirements of the new standard. We currently do not expect any changes to how we account for reimbursable pre-production costs, which are currently accounted for as a cost reduction. We expect revenue related to parts shipped under our production contracts to remain unchanged. We will adopt this standard as of July 2, 2018, the first day of our 2019 fiscal year, using the modified retrospective approach.

In August 2014, the FASB issued an update to the accounting guidance on determining when and how to disclose going-concern uncertainties in the financial statements. The new guidance requires management to perform interim and annual assessments of an entity’s ability to continue as a going concern within one year of the date the financial statements are issued. An entity must provide certain disclosures if conditions or events raise substantial doubt about the entity’s ability to continue as a going concern. This accounting update is effective for annual and interim periods beginning on or after December 15, 2016, with early adoption permitted. The adoption of this pronouncement did not have a material impact on our consolidated financial statements.

In July 2015, the FASB issued an accounting standard to simplify the measurement of inventory by changing the subsequent measurement guidance from the lower of cost or market to the lower of cost and net realizable value for inventory. The standard update is effective for fiscal years beginning after December 15, 2016 and interim periods within those years, and early adoption was permitted. The standard is to be applied prospectively. The adoption of this pronouncement did not have a material impact on our consolidated financial statements.

In February 2016, the FASB issued an update to the accounting guidance for leases. The update increases the transparency and comparability among organizations by requiring lessees to recognize

 

 

2018  STRATTEC  Annual  Report    36


NOTES TO FINANCIAL STATEMENTS

 

 

lease assets and lease liabilities on the balance sheet and to disclose key information about leasing arrangements. The guidance is effective for fiscal years beginning after December 15, 2018 and interim periods within those years. We do not expect that the adoption of this pronouncement will have a material impact on our consolidated financial statements.

In March 2016, the FASB issued an update to the accounting guidance for share-based payments. The update simplifies several aspects of the accounting for employee share-based payment transactions including the accounting for income taxes, forfeitures and statutory tax withholding requirements, as well as classification of such items in the statement of cash flows. The guidance is effective for fiscal years beginning after December 15, 2016 and interim periods within those years. The adoption of this pronouncement did not have a material impact on our consolidated financial statements.

In August 2016, the FASB issued an update to the accounting guidance on the classification of certain cash receipts and cash payments. The update aims to eliminate diversity in practice in how certain cash receipts and cash payments are presented and classified in the statement of cash flows. The guidance is effective for fiscal years beginning after December 15, 2017 and interim periods within those years. We do not expect that the adoption of this pronouncement will have a material impact on our consolidated financial statements.

In March 2017, the FASB issued an update to the accounting guidance for the presentation of net periodic pension cost and net periodic postretirement benefit cost. The update requires the service cost component of net periodic benefit cost be reported in the same line items as other compensation costs arising from services rendered by the pertinent employees during the applicable period. The remaining components of net periodic benefit cost are required to be presented separately from the service cost component outside a subtotal of income from operations. Additionally, the update allows only the service cost component to be eligible for capitalization when applicable. The guidance requires retrospective restatement for each period presented for the presentation of the service cost component and the other components of net periodic benefit cost in the income statement and prospective application for the capitalization of the service cost component of net periodic benefit cost. The guidance is effective for fiscal years beginning after December 15, 2017 and interim periods within those years, with early adoption permitted. We elected early adoption beginning with the interim periods of our fiscal 2018. The adoption of this guidance resulted in the reclassification of expense within our Consolidated Statements of Income and Comprehensive Income (Loss) for the fiscal years ended July 2, 2017 and July 3, 2016 of $793,000 and $901,000, respectively, from cost of goods sold to Other Income, net and $347,000 and $370,000, respectively, from engineering, selling and administrative expenses to Other Income, net.

In February 2018, the FASB issued guidance on the reclassification of certain tax effects from accumulated other comprehensive income. The guidance will permit entities to reclassify tax effects stranded in accumulated other comprehensive income as a result of U.S. tax reform to retained earnings. The guidance is effective for fiscal years beginning after December 15, 2018, and interim periods within these fiscal years. We do not expect that the adoption of this pronouncement will have a material impact on our consolidated financial statements.

Fiscal Year: Our fiscal year ends on the Sunday nearest June 30. The years ended July 1, 2018, July 2, 2017 and July 3, 2016 are comprised of 52, 52 and 53 weeks, respectively.

Use of Estimates: The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues and expenses for the periods presented. These estimates and assumptions could also affect the disclosure of contingencies. Actual results and outcomes may differ from management’s estimates and assumptions.

Cash and Cash Equivalents: Cash and cash equivalents include all short-term investments with an original maturity of three months or less due to the short-term nature of the instruments. Excess cash balances are placed in short-term commercial paper.

Derivative Instruments: We own and operate manufacturing operations in Mexico. As a result, a portion of our manufacturing costs are incurred in Mexican pesos, which causes our earnings and cash flows to fluctuate due to changes in the U.S. dollar/Mexican peso exchange rate. We executed contracts with Bank of Montreal that provide for monthly Mexican peso currency forward contracts for a portion of our estimated peso denominated operating costs. These peso currency forward contracts include settlement dates that began on October 16, 2015 and end on December 17, 2018. Our objective in entering into these currency forward contracts is to minimize our earnings volatility resulting from changes in exchange rates affecting the U.S. dollar cost of our Mexican operations. The Mexican peso forward contracts are not used for speculative purposes and are not designated as hedges. As a result, all currency forward contracts are recognized in our accompanying consolidated financial statements at fair value and changes in the fair value are reported in current earnings as part of Other Income, net.

The following table quantifies the outstanding Mexican peso forward contracts as of July 1, 2018 (thousands of dollars, except average forward contractual exchange rates):

 

                    Average            
    Effective       Notional       Forward Contractual       Fair    
    Dates            Amount            Exchange Rate            Value         

Buy MXP/Sell USD

  July 16, 2018 -

December 17, 2018

      $ 6,000           20.02         $ (39 )    
 

 

2018  STRATTEC  Annual  Report    37


LOGO

NOTES TO FINANCIAL STATEMENTS

 

 

The fair market value of all outstanding Mexican peso forward contracts in the accompanying Consolidated Balance Sheets was as follows (thousands of dollars):

 

       July 1, 2018   July 2, 2017    

Not designated as hedging Instruments:

          

Other current (liabilities) assets:

          

Mexican peso forward contracts

         $ (39)         $1,121  

The pre-tax effects of the Mexican peso forward contracts on the accompanying Consolidated Statements of Income and Comprehensive Income (Loss) consisted of the following (thousands of dollars):

 

     Other Income, net
     Years Ended
     July 1, 2018    July 2, 2017    July 3, 2016

Not Designated as Hedging Instruments:

              

Realized gain (loss)

     $ 1,140      $ (1,650 )      $ (1,196 )

Unrealized (loss) gain

     $ (1,160 )      $ 2,010      $ (889 )

Fair Value of Financial Instruments: The fair value of our cash and cash equivalents, accounts receivable, accounts payable and borrowings under our credit facilities approximated their book value as of July 1, 2018 and July 2, 2017. Fair Value is defined as the exchange price that would be received for an asset or paid for a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. Valuation techniques used to measure fair value must maximize the use of observable inputs and minimize the use of unobservable inputs. There is an established fair value hierarchy based on three levels of inputs, of which the first two are considered observable and the last unobservable. Level 1 – Quoted prices in active markets for identical assets or liabilities. These are typically obtained from real-time quotes for transactions in active exchange markets involving identical assets. Level 2 – Inputs, other than quoted prices included within Level 1, which are observable for the asset or liability, either directly or indirectly. These are typically obtained from readily-available pricing sources for comparable instruments. Level 3 – Unobservable inputs, where there is little or no market activity for the asset or liability. These inputs reflect the reporting entity’s own assumptions of the data that market participants would use in pricing the asset or liability, based on the best information available in the circumstances. The following table summarizes our financial assets and liabilities measured at fair value on a recurring basis as of July 1, 2018 and July 2, 2017 (thousands of dollars):

 

     July 1, 2018    July 2, 2017
     Level 1    Level 2    Level 3    Total    Level 1    Level 2    Level 3    Total

Assets:

                                       

Rabbi Trust Assets:

                                       

Stock index funds:

                                       

Small cap

     $ 298      $ -      $ -      $ 298      $ 382      $ -      $ -      $ 382

Mid cap

       286        -        -        286        391        -        -        391

Large cap

       562        -        -        562        519        -        -        519

International

       793        -        -        793        541        -        -        541

Fixed income funds

       850        -        -        850        763        -        -        763

Cash and cash equivalents

       -        3        -        3        -        3        -        3

Mexican peso forward contracts

       -        -        -        -        -        1,121        -        1,121
    

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

 

Total assets at fair value

     $ 2,789      $ 3      $ -      $ 2,792      $ 2,596      $ 1,124      $ -      $ 3,720
    

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

 

Liabilities:

                                       

Mexican peso forward contracts

     $ -      $ 39      $ -      $ 39      $ -      $ -      $ -      $ -
    

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

 

The Rabbi Trust assets fund our supplemental executive retirement plan and are included in Other Long-Term Assets in the accompanying Consolidated Balance Sheets. Refer to discussion of Mexican peso forward contracts under Derivative Instruments above. The fair value of the Mexican peso forward contracts considers the remaining term, current exchange rate and interest rate differentials between the two currencies. There were no transfers between Level 1 and Level 2 assets during 2018 or 2017.

Receivables: Receivables consist primarily of trade receivables due from Original Equipment Manufacturers in the automotive industry and locksmith/dealership distributors relating to our service and aftermarket sales. We evaluate the collectability of receivables based on a number of factors. An allowance for doubtful accounts is recorded for significant past due receivable balances based on a review of the past due items, general economic conditions and the industry as a whole. Changes in the allowance for doubtful accounts were as follows (thousands of dollars):

 

 

2018  STRATTEC  Annual  Report    38


NOTES TO FINANCIAL STATEMENTS

 

 

 

     Balance,      Provision             Balance,
     Beginning      for Doubtful      Net      End of
     of Year      Accounts      Write-Offs      Year
    

 

Year ended July 1, 2018

       $500        $     -        $     -          $500

Year ended July 2, 2017

       $500        $     -        $     -          $500

Year ended July 3, 2016

       $500        $     -        $     -          $500

Inventories: Inventories are comprised of material, direct labor and manufacturing overhead, and are stated at the lower of cost or market using the first-in, first-out (“FIFO”) cost method of accounting. Inventories consisted of the following (thousands of dollars):

 

     July 1, 2018      July 2, 2017                           

Finished products

     $ 13,410        $ 9,976

Work in process

       10,059          9,328

Purchased materials

       27,185          20,682
    

 

 

        

 

 

 
       50,654          39,986

Excess and obsolete reserve

       (4,000 )          (4,510 )
    

 

 

        

 

 

 

Inventories, net

     $ 46,654        $ 35,476
    

 

 

        

 

 

 

We record a reserve for excess and obsolete inventory based on historical and estimated future demand and market conditions. The reserve level is determined by comparing inventory levels of individual materials and parts to historical usage and estimated future sales by analyzing the age of the inventory in order to identify specific materials and parts that are unlikely to be sold. Technical obsolescence and other known factors are also considered in evaluating the reserve level. The activity related to the excess and obsolete inventory reserve was as follows (thousands of dollars):

 

     Balance,      Provision             Balance,
     Beginning      Charged to      Amounts      End of
     of Year      Expense      Written Off      Year
    

 

Year ended July 1, 2018

       $4,510          $1,002          $1,512          $4,000

Year ended July 2, 2017

       $2,800          $2,718          $1,008          $4,510

Year ended July 3, 2016

       $2,300          $   844          $   344          $2,800

Customer Tooling in Progress: We incur costs related to tooling used in component production and assembly. Costs for development of certain tooling, which will be directly reimbursed by the customer whose parts are produced from the tool, are accumulated on the balance sheet and are then billed to the customer. The accumulated costs are billed upon formal acceptance by the customer of products produced with the individual tool. Other tooling costs are not directly reimbursed by the customer. These costs are capitalized and amortized over the life of the related product based on the fact that the related tool will be used over the life of the supply arrangement. To the extent that estimated costs exceed expected reimbursement from the customer we recognize a loss.

Repair and Maintenance Supply Parts: We maintain an inventory of repair and maintenance supply parts in support of operations. This inventory includes critical repair parts for all production equipment as well as general maintenance items. The inventory of critical repair parts is required to avoid disruptions in our customers’ just-in-time production schedules due to a lack of spare parts when equipment break-downs occur. All required critical repair parts are on hand when the related production equipment is placed in service and maintained to satisfy the customer model life production and service requirements, which may be 12 to 15 years. As repair parts are used, additional repair parts are purchased to maintain a minimum level of spare parts inventory. Depending on maintenance requirements during the life of the equipment, excess quantities of repair parts arise. Excess quantities are kept on hand and are not disposed of until the equipment is no longer in service. A repair and maintenance supply parts reserve is maintained to recognize the normal adjustment of inventory for obsolete and slow moving supply and maintenance parts. The adequacy of the reserve is reviewed periodically in relation to the repair parts inventory balances. The gross balance of the repair and maintenance supply parts inventory was approximately $3.8 million at July 1, 2018 and $3.7 million at July 2, 2017. The repair and maintenance supply parts inventory balance is included in Other Current Assets in the accompanying Consolidated Balance Sheets. The activity related to the repair and maintenance supply parts reserve was as follows (thousands of dollars):

 

     Balance,      Provision             Balance,
     Beginning      Charged to      Amounts      End of
     of Year      Expense      Written Off      Year
    

 

Year ended July 1, 2018

       $900          $201          $201          $900

Year ended July 2, 2017

       $700          $438          $238          $900

Year ended July 3, 2016

       $620          $366          $286          $700
 

 

2018  STRATTEC  Annual  Report    39


LOGO

NOTES TO FINANCIAL STATEMENTS

 

 

Intangibles: Intangible assets that have defined useful lives were acquired in the purchase of the power sliding door, lift gate and deck lid system access control products from Delphi Corporation in 2009 and consist of patents, engineering drawings and software. The intangible assets balance is included in Other Long-Term Assets in the accompanying Consolidated Balance Sheets. The carrying value and accumulated amortization for these assets were as follows (thousands of dollars):

 

     July 1, 2018    July 2, 2017   

                    

Patents, engineering drawings and software

     $ 890      $ 890

Less: accumulated amortization

       (890 )        (849 )
    

 

 

      

 

 

 
     $ -      $ 41
    

 

 

      

 

 

 

Intangible amortization expense was $41,000 for the year ended July 1, 2018 and $99,000 for each of the years ended July 2, 2017, July 3, 2016. The intangible assets are fully amortized as of July 1, 2018.

Property, Plant and Equipment: Property, plant and equipment are stated at cost. Property, plant and equipment are depreciated on a straight-line basis over the estimated useful lives of the assets as follows:

 

Classification    Expected Useful Lives                                

Land improvements

   20 years    

Buildings and improvements

   15 to 35 years    

Machinery and equipment

   3 to 15 years    

Property, plant and equipment consisted of the following (thousands of dollars):

 

     July 1, 2018        July 2, 2017                             

Land and improvements

               $ 5,545                      $ 4,732  

Buildings and improvements

        34,483               36,046  

Machinery and equipment

        229,688               210,741  
     

 

 

           

 

 

 
        269,716               251,519  

Less: accumulated depreciation

        (153,174             (139,928
     

 

 

           

 

 

 
      $ 116,542             $ 111,591  
     

 

 

           

 

 

 

Depreciation expense was as follows for the periods indicated (thousands of dollars):

 

Fiscal Year    Depreciation Expense                               

 

2018

   $14,544    

2017

   $11,319    

2016

   $10,022    

The gross and net book value of property, plant and equipment located outside of the United States, primarily in Mexico, were as follows (thousands of dollars):

 

     July 1, 2018        July 2, 2017                          

Gross book value

     $140,681          $130,166  

Net book value

     $  74,364          $  69,652  

Long-lived assets are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. Recoverability of assets to be held and used is measured by a comparison of the carrying amount of an asset to future net undiscounted cash flows expected to be generated by the asset. If an asset is considered to be impaired, the impairment recognized is measured by the excess of the carrying amount of the asset over the fair value of the asset. Assets to be disposed of are reported at the lower of the carrying amount or fair value, less estimated costs to sell. There were no impairments recorded in the years ended July 1, 2018, July 2, 2017 or July 3, 2016.

Expenditures for repairs and maintenance are charged to expense as incurred. Expenditures for major renewals and betterments, which significantly extend the useful lives of existing plant and equipment, are capitalized and depreciated. Upon retirement or disposition of plant and equipment, the cost and related accumulated depreciation are removed from the accounts and any resulting gain or loss is recognized in income.

 

 

2018  STRATTEC  Annual  Report    40


NOTES TO FINANCIAL STATEMENTS

 

 

Supplier Concentrations: The following inventory purchases were made from major suppliers during each fiscal year noted:

 

     Percentage of        Number of           
Fiscal Year    Inventory Purchases         Suppliers

      2018

   32%                         5

      2017

   39%      7

      2016

   36%      6

We have long-term contracts or arrangements with most of our suppliers to guarantee the availability of raw materials and component parts.

Labor Concentrations: We had approximately 4,420 full-time associates of which approximately 260 or 5.9 percent were represented by a labor union at July 1, 2018. The associates represented by a labor union account for all production associates at our Milwaukee facility. The current contract with the unionized associates is effective through September 17, 2018.

Revenue Recognition: Revenue is recognized upon the shipment of products, which is when title passes, payment terms are final, we have no remaining obligations and the customer is required to pay. Revenue is recognized net of estimated returns and discounts, which is recognized as a deduction from revenue at the time of the shipment. Price concessions agreed to with customers are recorded as a reduction of sales at the later of when revenue related to the specific sales is recognized or the date at which the price concessions are offered and committed to.

Research and Development Costs: Expenditures relating to the development of new products and processes, including significant improvements and refinements to existing products, are expensed as incurred. Research and development expenditures were approximately $4.8 million in 2018, $4.6 million in 2017 and $430,000 in 2016.

Other Income (Expense), Net: Net other income (expense) included in the accompanying Consolidated Statements of Income and Comprehensive Income (Loss) primarily included foreign currency transaction gains and losses, realized and unrealized gains and losses on our Mexican peso currency forward contracts, the components of net periodic benefit cost other than the service cost component related to our pension and postretirement plans and Rabbi Trust gains. Foreign currency transaction gains and losses resulted from activity associated with foreign denominated assets held by our Mexican subsidiaries. We entered into the Mexican peso currency forward contracts during fiscal 2016, 2017 and 2018 to minimize earnings volatility resulting from changes in exchange rates affecting the U.S. dollar cost of our Mexican operations. The Rabbi Trust assets fund our amended and restated supplemental executive retirement plan. The investments held in the Trust are considered trading securities. The impact of these items for the periods presented was as follows (thousands of dollars):

 

     Years Ended
     July 1, 2018      July 2, 2017      July 3, 2016

Foreign currency transaction gain

     $ 549        $ 1,128        $ 2,559

Rabbi Trust gain (loss)

       193          296          (41 )

Unrealized (loss) gain on Mexican peso forward contracts

       (1,160 )          2,010          (889 )

Realized gain (loss) on Mexican peso forward contracts

       1,140          (1,650 )          (1,196 )

Pension and postretirement plans credit (cost)

       447          (1,140 )          (1,271 )

Other

       (149 )          523          235
    

 

 

        

 

 

        

 

 

 
     $ 1,020        $ 1,167        $ (603 )
    

 

 

        

 

 

        

 

 

 

Self Insurance Plans: We have self-insured medical and dental plans covering all eligible U.S. associates. The claims handling process for the self-insured plans are managed by a third-party administrator. Stop-loss insurance coverage limits our liability on a per individual per calendar year basis. The per individual per calendar year stop-loss limit was $150,000 in each calendar year 2015 through 2018. Effective January 1, 2011, under Health Care Reform, there is no lifetime maximum for overall benefits.

The expected ultimate cost for claims incurred under the self-insured medical and dental plans as of the applicable balance sheet date is not discounted and is recognized as an expense on our Consolidated Statements of Income and Comprehensive Income (Loss). The expected ultimate cost of claims is estimated based upon the aggregate liability for reported claims and an estimated liability for claims incurred but not reported, which is based on an analysis of historical data, current health care trends and information available from the third-party administrator. As additional information becomes available, actual results may differ from recorded estimates, which may require us to adjust the amount of our estimated liability for claims incurred but not reported. The expected ultimate cost for claims incurred under the self-insured medical and dental plans that has not been paid as of the applicable balance sheet date is included in Accrued Liabilities: Payroll and Benefits in our accompanying Consolidated Balance Sheets.

Changes in the balance sheet amounts for self-insured plans were as follows (thousands of dollars):

 

    Balance,      Provision             Balance,
    Beginning      Charged to             End of
    of Year      Expense      Payments      Year
   

 

Year ended July 1, 2018

      $420          $5,784          $5,784          $420

Year ended July 2, 2017

      $420          $5,796          $5,796          $420

Year ended July 3, 2016

      $420          $5,032          $5,032          $420
 

 

2018  STRATTEC  Annual  Report    41


LOGO

NOTES TO FINANCIAL STATEMENTS

 

 

Warranty Reserve: We have a warranty liability recorded related to our known and potential exposure to warranty claims in the event our products fail to perform as expected, and in the event we may be required to participate in the repair costs incurred by our customers for such products. The recorded warranty liability balance involves judgment and estimates. Our liability estimate is based on an analysis of historical warranty data as well as current trends and information, including our customers’ recent extension and/or expansion of their warranty programs. In recent fiscal periods, our largest customers have extended their warranty protection for their vehicles and have since demanded higher warranty cost sharing arrangements from their suppliers in their terms and conditions to purchase, including from STRATTEC. The 2018 warranty provision included costs for various known or expected warranty issues as of June 2018 for which amounts were reasonably estimable. During 2017, the warranty liability was reduced as a result of settlement payments of previously accrued customer warranty issues. As additional information becomes available, actual results may differ from recorded estimates, which may require us to adjust the amount of our warranty provision.

Changes in the warranty reserve were as follows (thousands of dollars):

 

              Provision              
       Balance,      (Recoveries)             Balance
       Beginning      Charged             End of
       of Year      to Expense      Payments      Year
    

 

 

Year ended July 1, 2018

     $  5,550        $ 2,617          $ 367        $ 7,800

Year ended July 2, 2017

     $  9,228        $ (843 )        $ 2,835        $ 5,550

Year ended July 3, 2016

     $11,835        $ 583        $ 3,190        $ 9,228

Foreign Currency Translation: The financial statements of our foreign subsidiaries and equity investees are translated into U.S. dollars using the exchange rate at each balance sheet date for assets and liabilities and the average exchange rate for each applicable period for sales, costs and expenses. Foreign currency translation adjustments are included as a component of accumulated other comprehensive loss. Foreign currency transaction gains and losses are included in other income, net in the accompanying Consolidated Statements of Income and Comprehensive Income (Loss).

Accumulated Other Comprehensive Loss: Accumulated other comprehensive loss (“AOCL”) was comprised of the following (thousands of dollars):

 

     July 1, 2018      July 2, 2017      July 3, 2016

Unrecognized pension and postretirement benefit liabilities, net of tax

     $ 18,148        $ 18,750        $ 24,518

Foreign currency translation, net of tax

       15,291          14,138          13,155
    

 

 

        

 

 

        

 

 

 
     $33,439      $32,888      $37,673
    

 

 

        

 

 

        

 

 

 

The following tables summarize the changes in AOCL for the years ended July 1, 2018 and July 2, 2017 (thousands of dollars):

 

     Year Ended July 1, 2018
     Foreign Currency      Retirement and              
     Translation      Postretirement              
    

Adjustments

    

Plans

    

Total

      

Balance July 2, 2017

       $14,138          $18,750          $32,888       

Other comprehensive loss before reclassifications

       2,370          820          3,190       

Income tax

       (151 )          (193 )          (344 )       
    

 

 

        

 

 

        

 

 

        

Net other comprehensive loss before reclassifications

       2,219          627          2,846       

Reclassifications:

                         

Prior service credits (A)

       -          752          752       

Actuarial gains (A)

       -          (2,514 )          (2,514 )       
    

 

 

        

 

 

        

 

 

        

Total reclassifications before tax

       -          (1,762 )          (1,762 )       

Income Tax

       -          533          533       
    

 

 

        

 

 

        

 

 

        

Net reclassifications

       -          (1,229 )          (1,229 )       
    

 

 

        

 

 

        

 

 

        

Other comprehensive loss (income)

       2,219          (602 )          1,617       

Other comprehensive loss attributable to non-controlling interest

       1,066          -          1,066       
    

 

 

        

 

 

        

 

 

        

Balance July 1, 2018

       $15,291          $18,148          $33,439       
    

 

 

        

 

 

        

 

 

        
 

 

2018  STRATTEC  Annual  Report    42


NOTES TO FINANCIAL STATEMENTS

 

 

 

     Year Ended July 2, 2017
     Foreign Currency      Retirement and              
     Translation      Postretirement              
    

Adjustments

    

Plans

    

Total

      

Balance July 3, 2016

       $13,155          $24,518          $37,673       

Other comprehensive loss before reclassifications

       534          (6,142 )          (5,608 )       

Income Tax

       (108 )          2,272          2,164       
    

 

 

        

 

 

        

 

 

        

Net other comprehensive loss before reclassifications

       426          (3,870 )          (3,444 )       

Reclassifications:

                         

Prior service credits (A)

       -          753          753       

Actuarial gains (A)

       -          (3,766 )          (3,766 )       
    

 

 

        

 

 

        

 

 

        

Total reclassifications before tax

       -          (3,013 )          (3,013 )       

Income Tax

       -          1,115          1,115       
    

 

 

        

 

 

        

 

 

        

Net reclassifications

       -          (1,898 )          (1,898 )       
    

 

 

        

 

 

        

 

 

        

Other comprehensive loss (income)

       426          (5,768 )          (5,342 )       

Other comprehensive income attributable to non-controlling interest

       (557 )          -          (557 )       
    

 

 

        

 

 

        

 

 

        

Balance July 2, 2017

       $14,138          $18,750          $32,888       
    

 

 

        

 

 

        

 

 

        

(A) Amounts reclassified are included in the computation of net periodic benefit cost, which is included in Other Income, net in the accompanying Condensed Consolidated Statements of Income and Comprehensive Income (Loss). See Retirement Plans and Postretirement Costs note to these Notes to Financial Statements below.

Accounting For Stock-Based Compensation: We maintain an omnibus stock incentive plan. This plan provides for the granting of stock options, shares of restricted stock and stock appreciation rights. The Board of Directors has designated 1,850,000 shares of common stock available for the grant of awards under the plan. Remaining shares available to be granted under the plan as of July 1, 2018 were 133,074. Awards that expire or are cancelled without delivery of shares become available for re-issuance under the plan. We issue new shares of common stock to satisfy stock option exercises.

Nonqualified and incentive stock options and shares of restricted stock have been granted to our officers, outside directors and specified associates under the stock incentive plan. Stock options granted under the plan may not be issued with an exercise price less than the fair market value of the common stock on the date the option is granted. Stock options become exercisable as determined at the date of grant by the Compensation Committee of our Board of Directors. The options expire 10 years after the grant date unless an earlier expiration date is set at the time of grant. The options vest 1 to 4 years after the date of grant. Shares of restricted stock granted under the plan are subject to vesting criteria determined by the Compensation Committee of our Board of Directors at the time the shares are granted and have a minimum vesting period of one year from the date of grant. Restricted shares granted prior to August 2014 have voting and dividend rights, regardless of whether the shares are vested or unvested. Restricted shares granted during August 2014 and thereafter have voting rights, regardless of whether the shares are vested or unvested, but only have the right to receive cash dividends after such shares become vested. Prior to August 2016, the restricted stock grants issued vest or vested 3 to 5 years after the date of grant. As of August 2016, restricted stock grants issued vest 1 to 5 years after the date of grant.

The fair value of each stock option grant was estimated as of the date of grant using the Black-Scholes pricing model. The resulting compensation cost for fixed awards with graded vesting schedules is amortized on a straight-line basis over the vesting period for the entire award. The expected term of awards granted is determined based on historical experience with similar awards, giving consideration to the contractual terms and vesting schedules. The expected volatility is determined based on our historical stock prices over the most recent period commensurate with the expected term of the award. The risk-free interest rate is based on U.S. Treasury zero-coupon issues with a remaining term commensurate with the expected term of the award. Expected pre-vesting option forfeitures are based primarily on historical data. The fair value of each restricted stock grant was based on the market price of the underlying common stock as of the date of grant. The resulting compensation cost is amortized on a straight line basis over the vesting period. We record stock based compensation only for those awards that are expected to vest.

All compensation cost related to stock options granted under the plan has been recognized as of July 1, 2018. Unrecognized compensation cost as of July 1, 2018 related to restricted stock granted under the plan was as follows (thousands of dollars):

 

               Weighted Average Period
     Compensation              over which Cost is to be
     Cost          Recognized (in years)

Restricted stock granted

     $ 1,092             0.9

Unrecognized compensation cost will be adjusted for any future changes in estimated and actual forfeitures.

 

 

2018  STRATTEC  Annual  Report    43


LOGO

NOTES TO FINANCIAL STATEMENTS

 

 

Cash received from stock option exercises and the related income tax benefit were as follows (thousands of dollars):

 

     Cash Received from      Income Tax              
Fiscal Year    Stock Option Exercises      Benefit

2018

   $  139      $      -

2017

   $  136      $    25

2016

   $  364      $  196

The intrinsic value of stock options exercised and the fair value of options vested were as follows (thousands of dollars):

 

     Years Ended
     July 1, 2018      July 2, 2017      July 3, 2016

Intrinsic value of options exercised

   $    110      $    115      $   529

Fair value of stock options vested

   $    315      $    566      $   331

No options were granted during the fiscal years ended July 1, 2018, July 2, 2017 or July 3, 2016.

The range of options outstanding as of July 2, 2017 was as follows:

 

      Weighted Average Remaining
  Number of Options   Weighted Average Exercise   Contractual Life Outstanding
  Outstanding/Exercisable       Price Outstanding/Exercisable       (In Years)
 

 

  $10.92-$18.49

  42,214/42,214   $15.36/$15.36   1.2

  $26.53-$38.71

  81,850/81,850   $31.06/$31.06   4.2

  $79.73

  9,010/9,010   $79.73/$79.73   6.1
    $29.37/$29.37  

Income Taxes: Income taxes are accounted for under the asset and liability method. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of assets and liabilities and their respective tax bases and operating loss carry-forwards. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences and operating loss carry-forwards are expected to be recovered, settled or utilized. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date. Valuation allowances are recorded to reduce deferred tax assets when it is more likely than not that a tax benefit will not be realized. We recognize the benefit of an income tax position only if it is more likely than not (greater than 50 percent) that the tax position will be sustained upon tax examination, based solely on the technical merits of the tax position. Otherwise, no benefit is recognized. The tax benefits recognized are measured based on the largest benefit that has a greater than 50 percent likelihood of being realized upon ultimate settlement. Additionally, we accrue interest and related penalties, if applicable, on all tax exposures for which reserves have been established consistent with jurisdictional tax laws. Interest and penalties on uncertain tax positions are classified in the Provision for Income Taxes in the accompanying Consolidated Statements of Income and Comprehensive Income (Loss).

Our income tax provision for the current year was impacted by the Tax Cuts and Jobs Act of 2017 (“the Act”), which was signed into law on December 22, 2017 with an effective date of January 1, 2018. The Act makes broad and complex changes to the U.S. tax code that affected our fiscal year ending July 1, 2018, including but not limited to (1) a reduction in the U.S. statutory tax rate to 21 percent following its effective date and a change in the measurement of our deferred tax assets and deferred tax liabilities resulting from the reduction in the statutory rate, (2) requiring a one-time transition tax on certain deemed repatriated earnings of foreign subsidiaries that is payable over eight years, and (3) bonus depreciation that will allow for full expensing of qualified property. Section 15 of the Internal Revenue Code stipulates that for our fiscal year ending July 1, 2018, we will have a blended statutory corporate tax rate of 28%, which is based on the applicable statutory tax rates before and after the Act and the number of days in our fiscal year.

The SEC staff issued SAB 118, which provides guidance on accounting for the tax effects of the Act. SAB 118 provides a measurement period that should not extend beyond one year from the Act’s enactment date for companies to complete the accounting under ASC 740. In accordance with SAB 118, a company must reflect the income tax effects of those aspects of the Act for which the accounting under ASC 740 is complete. To the extent that a company’s accounting for certain income tax effects of the Act is incomplete but it is still able to determine a reasonable estimate of the tax effect, it must record a provisional estimate in the financial statements. If a company cannot determine a provisional estimate to be included in the financial statements, it should continue to apply ASC 740 on the basis of the provision of the tax laws that were in effect immediately before the enactment of the Act.

In connection with our analysis of the impact of the Act, we have recorded an overall net tax benefit of approximately $3 million during 2018. This net tax benefit primarily consists of (1) the impact of

 

 

2018  STRATTEC  Annual  Report    44


NOTES TO FINANCIAL STATEMENTS

 

 

the change in measurement of our deferred tax assets and liabilities, which resulted in a favorable provision impact of $1.6 million, (2) the one-time transition tax on non-previously taxed post-1986 accumulated foreign earnings, which resulted in a net favorable impact of $500,000 and includes transition tax of $1.4 million offset by the reversal of net deferred tax liability balances totaling $1.9 million, which related to basis differences in foreign earnings, and (3) the impact of changing our annualized effective tax rate, which resulted in a favorable provision impact of $900,000. Measurement period adjustments recorded in the three and six month periods ended July 1, 2018 totaled $1.6 million and $2.0 million, respectively. For various reasons that are discussed more fully below, we have not completed our accounting for the income tax effects for certain elements of the Act. However, we were able to make reasonable estimates of certain effects and, therefore, we recorded provisional adjustments of these elements in the accompanying consolidated financial statements. We identified these items as provisional since our analysis of the items is not complete.

The Act reduces the corporate tax rate to 21 percent, effective January 1, 2018. For certain of our net deferred tax assets, we have recorded a provisional adjustment to reflect the reduction in the corporate tax rate. While we are able to make a reasonable estimate of the impact of the reduction in the corporate rate, it may be affected by other analyses related to the Act, including, but not limited to, the impact of our calculation of deemed repatriation of deferred foreign income and the impact of full expensing for certain assets.

The Deemed Repatriation Transition Tax (“Transition Tax”) is a tax on previously untaxed accumulated and current earnings and profits (E&P) of certain of our foreign subsidiaries. To determine the amount of the Transition Tax, we must determine, in addition to other factors, the amount of post-1986 E&P of the relevant subsidiaries, as well as the amount of non-U.S. income taxes paid on such earnings. We were able to make a reasonable estimate of the Transition Tax and recorded a provisional Transition Tax obligation in these consolidated financial statements. However, we are continuing to gather additional information to more precisely compute the amount of the Transition Tax.

We must assess whether our valuation allowance analyses are affected by various aspects of the Act (e.g., deemed repatriation of deferred foreign income, Global Intangible Low-Taxed Income (“GILTI”) inclusions, and new categories of Foreign Tax Credits). Since, as discussed herein, we have recorded provisional amounts related to certain portions of the Act, any corresponding determination of the need for, or any change in, a valuation allowance is also provisional.

Our accounting for the following elements of the Act is incomplete, and we were not yet able to make reasonable estimates of the effects. Therefore, no provisional adjustments were recorded for the following elements in these consolidated financial statements.

Because of the complexity of the new GILTI tax rules, we are continuing to evaluate this provision of the Act and the application of ASC 740. Under U.S. GAAP, we are allowed to make an accounting policy choice of either (1) treating taxes due on future U.S. inclusions in taxable income related to GILTI as a current-period expense when incurred (the “period cost method”) or (2) factoring such amounts into a company’s measurement of its deferred taxes (the “deferred method”). Our selection of an accounting policy with respect to the new GILTI tax rules will depend, in part, on analyzing our global income to determine whether we expect to have future U.S. inclusions in taxable income related to GILTI and, if so, what the impact is expected to be. Because whether we expect to have future U.S. inclusions in taxable income related to GILTI depends on not only our current structure and estimated future results of global operations but also our intent and ability to modify our structure and/or our business, we are not yet able to reasonably estimate the effect of this provision of the Act. Therefore, we have not made any adjustments related to potential GILTI tax in our financial statements and have not made a policy decision regarding whether to record deferred taxes on GILTI.

Our income tax provision for 2017 was impacted by the recognition of a $424,000 deferred tax liability resulting from a change in assertion regarding the permanent reinvestment of earnings from two of our Mexican subsidiaries. Prior to our fiscal 2017 second quarter, the accumulated undistributed earnings from such subsidiaries were considered to be permanently reinvested in Mexico. Accordingly, we did not previously record deferred income taxes on these earnings in our financial statements. During our fiscal 2017 second quarter, the strength of the U.S. dollar to the Mexican peso significantly decreased the U.S. tax cost associated with a distribution from the Mexican entities as compared to the U.S. tax cost associated with such a distribution in prior periods. Consequently, we changed our assertion regarding the permanent reinvestment of earnings from these Mexican subsidiaries. Such earnings were no longer considered permanently reinvested as of January 1, 2017. As a result, we repatriated $15.8 million from Mexico to the U.S. during our fiscal 2017, recognized the deferred tax liability resulting from the change in assertion, and concluded that, with some restrictions and tax implications, the remaining current and future accumulated undistributed earnings of these subsidiaries will be available for repatriation in future periods as deemed necessary.

Additionally, our income tax provisions for 2018 and 2017 were affected by the non-controlling interest portion of our pre-tax income. The non-controlling interest impacts the effective tax rate as ADAC-STRATTEC LLC and STRATTEC POWER ACCESS LLC entities are taxed as partnerships for U.S. tax purposes.

 

 

2018  STRATTEC  Annual  Report    45


LOGO

NOTES TO FINANCIAL STATEMENTS

 

 

INVESTMENT IN JOINT VENTURES AND MAJORITY OWNED SUBSIDIARIES

We participate in certain Alliance Agreements with WITTE Automotive (“WITTE”) and ADAC Automotive (“ADAC”). WITTE, of Velbert, Germany, is a privately held automotive supplier. WITTE designs, manufactures and markets automotive components, including locks and keys, hood latches, rear compartment latches, seat back latches, door handles and specialty fasteners. WITTE’s primary market for these products has been Europe. ADAC, of Grand Rapids, Michigan, is a privately held automotive supplier and manufactures engineered products, including door handles and other automotive trim parts, utilizing plastic injection molding, automated painting and various assembly processes.

The Alliance Agreements include a set of cross-licensing agreements for the manufacture, distribution and sale of WITTE products by STRATTEC and ADAC in North America, and the manufacture, distribution and sale of STRATTEC and ADAC products by WITTE in Europe. Additionally, a joint venture company, Vehicle Access Systems Technology LLC (“VAST LLC”), in which WITTE, STRATTEC and ADAC each hold a one-third equity interest, exists to seek opportunities to manufacture and sell each company’s products in areas of the world outside of North America and Europe.

VAST LLC has investments in Sistema de Veicular Ltda, VAST Fuzhou, VAST Great Shanghai, VAST Shanghai Co. and Minda-VAST Access Systems. Sistema de Acesso Veicular Ltda is located in Brazil and services customers in South America. VAST Fuzhou, VAST Great Shanghai and VAST Shanghai Co. (collectively known as VAST China), provide a base of operations to service each partner’s automotive customers in the Asian market. VAST LLC also maintains branch offices in South Korea and Japan in support of customer sales and engineering requirements.

Effective April 30, 2015, VAST LLC executed an agreement with Minda Management Services Limited to become a 50:50 joint venture partner in the former Minda-Valeo Security Systems joint venture entity, based in Pune, India. This joint venture entity was renamed Minda-VAST Access Systems (“Minda-VAST”). Minda Management Services Limited is an affiliate of both Minda Corporation Limited and Spark Minda, Ashok Minda Group of New Delhi, India (collectively “Minda”). Minda and its affiliates cater to the needs of all major car, motorcycle, commercial vehicle, tractor and off-road vehicle manufacturers in India. They are a leading manufacturer in the Indian marketplace of security and access products, handles, automotive safety, restraint systems, driver information and telematics systems for both OEMs and the aftermarket.

The VAST LLC investments are accounted for using the equity method of accounting and the results of the VAST LLC foreign subsidiaries and joint venture are reported on a one-month lag basis. The activities related to the VAST LLC joint ventures resulted in equity earnings of joint ventures to STRATTEC of approximately $4.4 million during 2018, equity earnings of joint ventures to STRATTEC of approximately $2.6 million during 2017 and equity loss of joint ventures to STRATTEC of approximately $639,000 during 2016. The 2016 equity loss of joint ventures for VAST LLC included a $6 million impairment charge related to its Minda-VAST Access Systems joint venture in India. STRATTEC’s portion of this impairment charge for 2016 totaled $2 million. During 2018, 2017 and 2016, capital contributions totaling $375,000, $1.2 million and $660,000, respectively, were made to VAST LLC for purposes of funding operations in Brazil. STRATTEC’s portion of the capital contributions totaled $125,000 in 2018, $400,000 in 2017 and $220,000 in 2016.

ADAC-STRATTEC LLC, a Delaware limited liability company, was formed in fiscal year 2007 to support injection molding and door handle assembly operations in Mexico. ADAC-STRATTEC LLC was 51 percent owned by STRATTEC and 49 percent owned by ADAC for all periods presented in this report. An additional Mexican entity, ADAC-STRATTEC de Mexico, is wholly owned by ADAC-STRATTEC LLC. ADAC-STRATTEC LLC’s financial results are consolidated with the financial results of STRATTEC and resulted in increased net income to STRATTEC of approximately $1.8 million in 2018, $3.1 million in 2017 and $2.9 million in 2016. In accordance with the provisions of the ADAC-STRATTEC Credit Facility a capital contribution to ADAC-STRATTEC LLC of $6 million collectively from STRATTEC and ADAC was completed during 2017. STRATTEC’s portion of this capital contribution totaled $3.06 million. No capital contributions to ADAC-STRATTEC LLC were made during 2018 or 2016.

STRATTEC POWER ACCESS LLC (“SPA”) was formed in fiscal year 2009 to supply the North American portion of the power sliding door, lift gate and deck lid system access control products which were acquired from Delphi Corporation. SPA was 80 percent owned by STRATTEC and 20 percent owned by WITTE for all periods presented in this report. An additional Mexican entity, STRATTEC POWER ACCESS de Mexico, is wholly owned by SPA. The financial results of SPA are consolidated with the financial results of STRATTEC and resulted in increased net income to STRATTEC of approximately $2.2 million in 2018, approximately $2.6 million in 2017 and approximately $2.0 million in 2016.

SAL LLC was formed in fiscal 2013 to introduce a new generation of biometric security products based upon the designs of Actuator Systems LLC, our partner and the owner of the remaining ownership interest. SAL LLC was 51 percent owned by STRATTEC for all periods presented in this report. Our investment in SAL LLC, for which we exercise significant influence but

 

 

2018  STRATTEC  Annual  Report    46


NOTES TO FINANCIAL STATEMENTS

 

 

do not control and are not the primary beneficiary, is accounted for using the equity method. The activities related to SAL LLC resulted in an equity earnings of joint ventures to STRATTEC of approximately $91,000 in 2018, and equity loss of joint ventures to STRATTEC of approximately $1.9 million in 2017 and $1.6 million in 2016. During all periods presented in this report, 100 percent of the funding for SAL LLC was being made through loans from STRATTEC to SAL LLC and through STRATTEC’s guarantee of the SAL Credit Facility which is discussed herein. Therefore, for all periods presented in this report, even though STRATTEC maintains a 51 percent ownership interest in SAL LLC, STRATTEC recognized 100 percent of the losses of SAL LLC up to our committed financial support through Equity Earnings (Loss) of Joint Ventures in the accompanying Consolidated Statements of Income and Comprehensive Income (Loss). In addition, the equity loss of joint ventures for SAL LLC included the following for the periods presented (thousands of dollars):

 

     Years Ended
     July 1, 2018    July 2, 2017    July 3, 2016

Loss on Loan to SAL LLC

     $         -      $         -      $   225

Loss on Guarantee of SAL LLC

              

Credit Facility

     $         -      $         -      $   247

During fiscal 2018, we, along with our joint venture partner, reduced operating the business of SAL LLC to winding down and selling only commercial biometric locks.

STRATTEC’s joint venture investments are included in the accompanying Consolidated Balance Sheets as follows (thousands of dollars):

 

     July 1, 2018    July 2, 2017    

Investment in Joint Ventures:

         

Investment in VAST LLC

     $ 22,192      $ 16,840
    

 

 

      

 

 

 
         

Other Current Liabilities:

         

Investment in SAL LLC

     $ 458      $ 463
    

 

 

      

 

 

   

See further discussion under Equity Earnings (Loss) of Joint Ventures included in Notes to Financial Statements herein.

EQUITY EARNINGS (LOSS) OF JOINT VENTURES

As discussed above under the note Investment in Joint Ventures and Majority Owned Subsidiaries, we hold a one-third ownership interest in VAST LLC, for which we exercise significant influence but do not control and are not the primary beneficiary. Our investment in VAST LLC is accounted for using the equity method. The following are summarized statements of operations and summarized balance sheet data for VAST LLC (thousands of dollars):

 

     Years Ended
     July 1, 2018   July 2, 2017    July 3, 2016

Net sales

     $ 174,896     $ 128,963      $ 114,338

Cost of goods sold

       134,185       101,910        94,060
    

 

 

     

 

 

      

 

 

 

Gross profit

       40,711       27,053        20,278

Engineering, selling and administrative expense

       26,450       19,710        15,866

Impairment charge

       -       -        6,000
    

 

 

     

 

 

      

 

 

 

Income (loss) from operations

       14,261       7,343        (1,588 )

Other income (expense), net

       1,757       1,662        (115 )
    

 

 

     

 

 

      

 

 

 

Income (loss) before provision for income taxes

       16,018       9,005        (1,703 )

Provision for income taxes

       2,632       1,235        168
    

 

 

     

 

 

      

 

 

 

Net income (loss)

     $ 13,386     $ 7,770      $ (1,871 )
    

 

 

     

 

 

      

 

 

 

STRATTEC’s share of VAST LLC net income (loss)

     $ 4,463     $ 2,590      $ (624 )

Intercompany profit eliminations

       (22 )       3        (15 )
    

 

 

     

 

 

      

 

 

 

STRATTEC’s equity earnings (loss) of VAST LLC

     $ 4,441     $ 2,593      $ (639 )
    

 

 

     

 

 

      

 

 

 
 

 

2018  STRATTEC  Annual  Report    47


LOGO

NOTES TO FINANCIAL STATEMENTS

 

 

 

     July 1, 2018    July 2, 2017

Cash and cash equivalents

     $ 8,959      $ 11,757

Receivables, net

       43,930        41,942

Inventories, net

       20,510        15,185

Other current assets

       16,020        11,782
    

 

 

      

 

 

 

Total current assets

       89,419        80,666

Property, plant and equipment, net

       42,923        31,017

Other long-term assets

       14,974        12,850
    

 

 

      

 

 

 

Total assets

     $ 147,316      $ 124,533
    

 

 

      

 

 

 

Current liabilities

     $ 74,721      $ 70,753

Long-term liabilities

       5,654        2,960
    

 

 

      

 

 

 

Total liabilities

     $ 80,375      $ 73,713
    

 

 

      

 

 

 

Net assets

     $ 66,941      $ 50,820
    

 

 

      

 

 

 

STRATTEC’s share of VAST LLC net assets

     $ 22,314      $ 16,940
    

 

 

      

 

 

 

The 2016 equity loss of joint ventures for VAST LLC included a $6 million impairment charge related to its Minda-VAST Access Systems joint venture in India. STRATTEC’s portion of this impairment charge in 2016 totaled $2 million.

As discussed above under the note Investment in Joint Ventures and Majority Owned Subsidiaries, we hold a 51 percent ownership interest in a joint venture company, SAL LLC, which exists to introduce a new generation of biometric security products based upon the designs of Actuator Systems LLC, our partner. SAL LLC had a $1.5 million revolving credit facility with BMO Harris Bank N.A. with a maturity date of February 16, 2016, which was fully guaranteed by STRATTEC. Outstanding borrowings under the SAL Credit Facility as of February 16, 2016 totaled $1.5 million. SAL LLC did not have cash available to pay the outstanding debt balance as of the maturity date. Therefore, STRATTEC made a payment of $1.5 million on its guarantee on February 16, 2016. Prior to making the guarantee payment, STRATTEC had recorded a liability related to the guarantee of $1.5 million at February 16, 2016. STRATTEC’s proportionate share of the guarantee based on our ownership percentage in SAL LLC totaled $765,000 as of February 16, 2016, and accordingly, our investment in SAL LLC included this amount as of this date. Our joint venture partner did not guarantee their proportionate share of the SAL Credit Facility. As a result, we recorded a loss equal to our partner’s proportionate share of the fair value of the STRATTEC guarantee based upon our partner’s ownership interest in the joint venture of $488,000 during fiscal 2015 and $247,000 during 2016. This loss is included in Equity Earnings (Loss) of Joint Ventures for 2016, as applicable, in the accompanying Consolidated Statements of Income and Comprehensive Income (Loss). SAL LLC is considered a variable interest entity based on the STRATTEC guarantee and additional loans from STRATTEC as discussed below. STRATTEC is not the primary beneficiary and does not control the entity. Accordingly, our investment in SAL LLC is accounted for using the equity method.

SAL LLC maintains a license agreement with Westinghouse allowing SAL LLC to do business as Westinghouse Security. This license agreement expired August 16, 2018. Payments due to Westinghouse under the license agreement were guaranteed by STRATTEC. As of July 2, 2017, STRATTEC had recorded a liability equal to the estimated fair value of the future payments due under this guarantee of $250,000. This liability is included in the accompanying Consolidated Balance Sheets in Accrued Liabilities: Other as of July 2, 2017. STRATTEC made a payment to Westinghouse of $250,000 on this guarantee during 2018. STRATTEC’s proportionate share of the guarantee of this payment based on our ownership percentage in SAL LLC totaled $127,000, and accordingly, our investment in SAL LLC was increased by this amount as of July 1, 2018 and July 2, 2017.

Loans were made from STRATTEC to SAL LLC in support of operating expenses and working capital needs. The outstanding loan amounts totaled $2.6 million as of July 2, 2017 and July 3, 2016, respectively. As of July 2, 2017, the outstanding loan amount was eliminated against STRATTEC’s negative Investment in SAL LLC in the preparation of the consolidated financial statements.

Even though we maintain a 51 percent ownership interest in SAL LLC, effective with our fiscal 2015 fourth quarter, 100 percent of the funding for SAL LLC was being made by loans from STRATTEC to SAL LLC. Therefore, STRATTEC began recognizing 100 percent of the losses of SAL LLC up to our committed

 

 

2018  STRATTEC  Annual  Report    48


NOTES TO FINANCIAL STATEMENTS

 

 

financial support through Equity Earnings (Loss) of Joint Ventures in the accompanying Consolidated Statements of Income and Comprehensive Income (Loss) effective with our fiscal 2015 fourth quarter.

The following are summarized statements of operations and summarized balance sheet data for SAL LLC (thousands of dollars):

 

     Years Ended
     July 1, 2018   July 2, 2017   July 3, 2016

Net sales

     $ 89     $ 369     $ 603

Cost of goods sold

       67       610       382
    

 

 

     

 

 

     

 

 

 

Gross profit (loss)

       22       (241 )       221

Engineering, selling and administrative expense

       17       1,534       1,311
    

 

 

     

 

 

     

 

 

 

Earnings (Loss) from operations

       5       (1,775 )       (1,090 )

Other expense, net

       (258 )       (155 )       (34 )
    

 

 

     

 

 

     

 

 

 

Net loss

     $ (253 )     $ (1,930 )     $ (1,124 )
    

 

 

     

 

 

     

 

 

 

STRATTEC’s share of SAL LLC earnings (loss)

     $ 91     $ (1,927 )     $ (1,124 )

Loss on loan to SAL LLC

       -       -       (225 )

Loss on guarantee of SAL LLC credit facility

       -       -       (247 )
    

 

 

     

 

 

     

 

 

 

STRATTEC’s equity earnings (loss) of SAL LLC

     $ 91     $ (1,927 )     $ (1,596 )
    

 

 

     

 

 

     

 

 

 

 

     July 1, 2018   July 2, 2017

Cash and cash equivalents

     $ 5     $ 11

Receivables, net

       40       11

Inventories, net

       87       345
    

 

 

     

 

 

 

Total assets

     $ 132     $ 367
    

 

 

     

 

 

 

Current liabilities

     $ 3,208     $ 3,189
    

 

 

     

 

 

 

Net liabilities

     $ (3,076 )     $ (2,822 )
    

 

 

     

 

 

 

STRATTEC’s share of SAL LLC net liabilities

     $ (1,569 )     $ (1,439 )
    

 

 

     

 

 

 

During fiscal 2018, we, along with our joint venture partner, reduced operating the business of SAL LLC to winding down and selling only commercial biometric locks.

We have sales of component parts to VAST LLC and SAL LLC, purchases of component parts from VAST LLC, expenses charged to VAST LLC for engineering and accounting services and expenses charged from VAST LLC to STRATTEC for general headquarter expenses. The following tables summarize the related party transactions with VAST LLC and SAL LLC for the periods indicated (thousands of dollars):

 

     Years Ended
     July 1, 2018    July 2, 2017    July 3, 2016

Sales to VAST LLC

     $ 3,151      $ 1,966      $ 304

Sales to SAL LLC

     $ 98      $ 234      $ 363

Purchases from VAST LLC

     $ 183      $ 245      $ 149

Expenses charged to VAST LLC

     $ 984      $ 843      $ 1,034

Expenses charged from VAST LLC

     $ 886      $ 1,134      $ 1,526
     July 1, 2018    July 2, 2017     

Accounts receivable from VAST LLC

     $ 53      $ -     

Accounts receivable from SAL LLC(A)

     $ -      $ -     

Current loan receivable from SAL LLC(A)

     $ -      $ -     

Long-term loan receivable from VAST LLC

     $ -      $ 300     

Accounts payable to VAST LLC

     $ 87      $ -     

(A) As of July 1, 2018, outstanding loan and accounts receivable balances due from SAL LLC to STRATTEC totaled $2.6 million and $82,000, respectively. As of July 2, 2017, outstanding loan and accounts receivable balances due from SAL LLC to STRATTEC totaled $2.6 million and $185,000, respectively. As of July 1, 2018 and July 2, 2017, these outstanding balances have been offset against our investment in SAL LLC, which is included in Other Current Liabilities in the Consolidated Balance Sheet.

CREDIT FACILITIES

STRATTEC has a $30 million secured revolving credit facility (the “STRATTEC Credit Facility”) with BMO Harris Bank N.A. ADAC-STRATTEC LLC has a $30 million secured revolving credit facility (the “ADAC-STRATTEC Credit Facility”) with BMO Harris Bank N.A., which is guaranteed by STRATTEC. The ADAC-STRATTEC Credit Facility borrowing limit decreases to $25 million effective July 1, 2019. The

 

 

2018  STRATTEC  Annual  Report    49


LOGO

NOTES TO FINANCIAL STATEMENTS

 

 

credit facilities both expire on August 1, 2020. Borrowings under either credit facility are secured by our U.S. cash balances, accounts receivable, inventory and fixed assets located in the U.S. Interest on borrowings under both credit facilities is at varying rates based at our option, on the LIBOR plus 1.0 percent or the bank’s prime rate. Both credit facilities contain a restrictive financial covenant that requires the applicable borrower to maintain a minimum net worth level. The ADAC-STRATTEC Credit Facility includes an additional restrictive financial covenant that requires the maintenance of a minimum fixed charge coverage ratio. The ADAC-STRATTEC Credit Facility also required that a capital contribution to ADAC-STRATTEC LLC of $6 million collectively from STRATTEC and ADAC be completed by September 30, 2016. This capital contribution was completed as required. STRATTEC’s portion of the capital contribution totaled $3.06 million. As of July 1, 2018, we were in compliance with all financial covenants required by these credit facilities.

Outstanding borrowings under the credit facilities referenced in the above paragraph as of the end of 2018 and 2017 were as follows (thousands of dollars):

 

     July 1, 2018    July 2, 2017    

STRATTEC Credit Facility

     $ 23,000      $ 16,000

ADAC-STRATTEC Credit Facility

     $ 28,000      $ 14,000

Average outstanding borrowings and the weighted average interest rate under each such credit facility during 2018 and 2017 were as follows (thousands of dollars):

 

       Average Outstanding      Weighted Average
       Borrowings      Interest Rate
       Years Ended      Years Ended
       July 1, 2018      July 2, 2017      July 1, 2018      July 2, 2017

STRATTEC Credit Facility

       $ 21,668        $ 12,490          2.5 %          1.8 %

ADAC-STRATTEC Credit Facility

       $ 22,621        $ 10,865          2.5 %          1.8 %

We believe that the credit facilities referenced above are adequate, along with existing cash balances and cash flow from operations, to meet our anticipated capital expenditure, working capital, dividend and operating expenditure requirements.

COMMITMENTS AND CONTINGENCIES

We are from time to time subject to various legal actions and claims incidental to our business, including those arising out of alleged defects, alleged breaches of contracts, product warranties, intellectual property matters and employment related matters. It is our opinion that the outcome of such matters will not have a material adverse impact on the consolidated financial position, results of operations or cash flows of STRATTEC. With respect to warranty matters, although we cannot ensure that the future costs of warranty claims by customers will not be material, we believe our established reserves are adequate to cover potential warranty settlements.

We have a reserve for estimated costs to remediate an environmental contamination site at our Milwaukee facility. The site was contaminated by a solvent spill, which occurred in 1985, from a former above ground solvent storage tank located on the east side of the facility. The reserve was initially established in 1995. Due to changing technology and related costs associated with active remediation of the site, in fiscal 2010 the reserve was adjusted based on updated third party estimates to adequately cover the cost for active remediation of the contamination. Additionally, in fiscal 2016, STRATTEC obtained updated third party estimates for adequately covering the cost of active remediation of this contamination. Based upon the updated estimates, no further adjustment to the reserve was required. From 1995 through July 1, 2018, costs of approximately $584,000 have been incurred related to the installation of monitoring wells on the property and ongoing monitoring costs. We monitor and evaluate the site with the use of groundwater monitoring wells that are installed on the property. An environmental consultant samples these wells one or two times a year to determine the status of the contamination and the potential for remediation of the contamination by natural attenuation, the dissipation of the contamination over time to concentrations below applicable standards. If such sampling evidences a sufficient degree of and trend toward natural attenuation of the contamination, we may be able to obtain a closure letter from the regulatory authorities resolving the issue without the need for active remediation. If a sufficient degree and trend toward natural attenuation is not evidenced by sampling, a more active form of remediation beyond natural attenuation may be required. The sampling has not yet satisfied all of the requirements for closure by natural attenuation. As a result, sampling continues and the reserve remains at an amount to reflect the estimated cost of active remediation. The reserve is not measured on a discounted basis. We believe, based on findings-to-date and known environmental regulations, that the environmental reserve of $1.3 million at July 1, 2018, is adequate.

At July 1, 2018, we had purchase commitments related to zinc, other purchased parts and natural gas.

 

 

2018  STRATTEC  Annual  Report    50


NOTES TO FINANCIAL STATEMENTS

 

 

We also had minimum rental commitments under non-cancelable operating leases with a term in excess of one year. The purchase and minimum rental commitments are payable as follows (thousands of dollars):

 

     Purchase    Minimum Rental     
Fiscal Year    Commitments    Commitments

 

2019

   $ 9,195    $ 919

2020

   $ 3,929    $ 361

2021

   $         -    $ 134

2022

   $         -    $   91

2023-2024

   $         -    $ 140

Rental expense under all non-cancelable operating leases was as follows (thousands of dollars):

 

Fiscal Year    Rental Expense     

 

2018

   $    731

2017

   $    704

2016

   $    691

INCOME TAXES

The provision for income taxes consisted of the following (thousands of dollars):

 

     Years Ended
     July 1, 2018    July 2, 2017    July 3, 2016

Currently payable:

              

Federal

     $ 156      $ 228      $ 18

State

       73        3        130

Foreign

       812        2,202        1,893
    

 

 

      

 

 

      

 

 

 
       1,041        2,433        2,041

Deferred tax provision

       1,029        1,851        3,027
    

 

 

      

 

 

      

 

 

 
     $ 2,070      $ 4,284      $ 5,068
    

 

 

      

 

 

      

 

 

 

The items accounting for the difference between income taxes computed at the Federal statutory tax rate and the provision for income taxes were as follows:

 

     Years Ended
     July 1, 2018   July 2, 2017   July 3, 2016

U.S. statutory rate

       28.0 %       35.0 %       34.0 %

State taxes, net of Federal tax benefit

       1.6       1.2       1.3

Foreign subsidiaries

       (0.7 )       (1.1 )       0.6

U.S. taxation on non-U.S. earnings

       -       3.8       -

U.S. tax reform: transition tax

       (3.0 )       -       -

U.S. tax reform: change in deferred rate

       (9.3 )       -       -

Research and development tax credit

       (2.5 )       (2.7 )       -

Non-controlling interest

       (5.6 )       (9.9 )       (9.3 )

Uncertain tax positions

       2.1       0.8       -

Stock based compensation

       1.7       0.1       0.2

Other

       (0.6 )       (1.1 )       (0.4 )
    

 

 

     

 

 

     

 

 

 
     11.7%   26.1%   26.4%
    

 

 

     

 

 

     

 

 

 

The components of deferred tax (liabilities) assets were as follows (thousands of dollars):

 

     July 1, 2018    July 2, 2017

Unrecognized pension and postretirement benefit plan liabilities

     $ 6,887      $ 11,191

Accrued warranty

       517        925

Payroll-related accruals

       1,959        2,605

Stock-based compensation

       727        1,488

Inventory reserve

       799        1,249

Environmental reserve

       303        484

Repair and maintenance supply parts reserve

       212        333

Allowance for doubtful accounts

       118        185

NOL/credit carry-forwards

       248        1,669

Postretirement obligations

       (375 )        (405 )

Accumulated depreciation

       (4,902 )        (6,034 )

Accrued pension obligations

       (9,235 )        (14,483 )

Joint ventures

       814        808

Other

       967        241
    

 

 

      

 

 

 
     $ (961 )      $ 256
    

 

 

      

 

 

 
 

 

2018  STRATTEC  Annual  Report    51


LOGO

NOTES TO FINANCIAL STATEMENTS

 

 

Deferred income tax balances reflect the effects of temporary differences between the carrying amounts of assets and liabilities and their tax basis and are stated at enacted tax rates expected to be in effect when taxes are actually paid or recovered.

State operating loss and credit carry-forwards at July 1, 2018 resulted in future benefits of approximately $248,000 and expire at varying times between 2024 and 2032. A valuation allowance of $172,000 has been recorded as of July 1, 2018, due to our assessment of the future realization of certain credit carry-forward benefits. We do not currently anticipate having sufficient state taxable income to offset these credit carry-forwards.

Foreign income before the provision for income taxes was $1.1 million in 2018, $5.3 million in 2017 and $6.0 million in 2016. The income tax provision for 2017 included $424,000 related to the recognition of a deferred tax liability resulting from a change in assertion regarding the permanent reinvestment of earnings from two of our Mexican subsidiaries. Prior to 2017, the accumulated undistributed earnings from such subsidiaries were considered to be permanently reinvested in Mexico. Accordingly, we did not previously record deferred income taxes on these earnings in our financial statements. During 2017, the strength of the U.S. dollar to the Mexican peso significantly decreased the U.S. tax cost associated with a distribution from the Mexican entities as compared to the U.S. tax cost associated with such a distribution in prior periods. Consequently, we changed our assertion regarding the permanent reinvestment of earnings from these Mexican subsidiaries. Such earnings are no longer considered permanently reinvested. We repatriated $15.8 million from Mexico to the U.S. during 2017, recognized the deferred tax liability resulting from the change in assertion, and concluded that, with some restrictions and tax implications, the remaining current and future accumulated undistributed earnings of these subsidiaries will be available for repatriation as deemed necessary.

The total liability for unrecognized tax benefits was $796,000 as of July 1, 2018 and $610,000 as of July 2, 2017 and was included in Other Long-term Liabilities in the accompanying Consolidated Balance Sheets. This liability includes approximately $741,000 of unrecognized tax benefits at July 1, 2018 and $571,000 at July 2, 2017 and approximately $55,000 of accrued interest at July 1, 2018 and $39,000 at July 2, 2017. This liability does not include an amount for accrued penalties. The amount of unrecognized tax benefits that, if recognized, would affect the effective tax rate was approximately $375,000 at July 1, 2018 and $143,000 at July 2, 2017. We recognize interest and penalties related to unrecognized tax benefits in the provision for income taxes.

A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows for the years ended July 1, 2018 and July 2, 2017 (thousands of dollars):

 

     Years Ended
     July 1, 2018      July 2, 2017

Unrecognized tax benefits, beginning of year

     $ 571        $ 441

Gross increases – tax positions in prior years

       101          28

Gross decreases – tax positions in prior years

       -          -

Gross increases – current period tax positions

       126          177

Tax years closed

       (57 )          (75 )
    

 

 

        

 

 

 

Unrecognized tax benefits, end of year

     $ 741        $ 571
    

 

 

        

 

 

 

We or one of our subsidiaries files income tax returns in the United States (Federal), Wisconsin (state), Michigan (state) and various other states, Mexico and other foreign jurisdictions. Tax years open to examination by tax authorities under the statute of limitations include fiscal 2015 through 2018 for Federal, fiscal 2011 through 2018 for most states and calendar 2013 through 2017 for foreign jurisdictions.

RETIREMENT PLANS AND POSTRETIREMENT COSTS

We have a qualified, noncontributory defined benefit pension plan (“Qualified Pension Plan”) covering substantially all U.S. associates employed by us prior to January 1, 2010. Benefits under the Qualified Pension Plan are based on credited years of service and final average compensation. Our policy is to fund the Qualified Pension Plan with at least the minimum actuarially computed annual contribution required under the Employee Retirement Income Security Act of 1974 (ERISA). Plan assets consist primarily of listed equity and fixed income securities. Effective December 31, 2009, the Board of Directors amended the Qualified Pension Plan to freeze benefit accruals and future eligibility. The Board of Directors has subsequently approved to proceed with the termination of the Qualified Pension Plan. We submitted a request to and received a response from the IRS for a determination letter that the Qualified Pension Plan is qualified for termination. We intend to distribute substantially all of the Qualified

 

 

2018  STRATTEC  Annual  Report    52


NOTES TO FINANCIAL STATEMENTS

 

 

Pension Plan assets prior to the end of December 2018. Additionally, in connection with preparing for the termination of the Qualified Pension Plan, we have amended the plan to provide that participants are 100 percent vested in their accrued benefits as of the effective date of the plan termination, to adopt a new standard for disability benefits that will apply when the plan’s assets are distributed due to the termination, to add a lump sum distribution for employees and terminated vested participants who are not in payment status when Qualified Pension Plan assets are distributed due to the termination and to make certain other conforming amendments to the Qualified Pension Plan to comply with applicable laws that may be required by the IRS or may be deemed necessary or advisable to improve the administration of the Qualified Pension Plan or facilitate its termination and liquidation. We will contribute to the Trust Fund for the Qualified Pension Plan as necessary to ensure there are sufficient assets to provide all Qualified Pension Plan benefits as required by the PBGC. The financial impact of the Qualified Pension Plan termination will be recognized as a settlement of the Qualified Pension Plan liabilities. The settlement date and related financial impact may occur during fiscal year 2019 but have not yet been determined and is still subject to final Board approval.

We have historically had in place a noncontributory supplemental executive retirement plan (“SERP”), which prior to January 1, 2014 was a nonqualified defined benefit plan that essentially mirrored the Qualified Pension Plan, but provided benefits in excess of certain limits placed on our Qualified Pension Plan by the Internal Revenue Code. As noted above, we froze our Qualified Pension Plan effective as of December 31, 2009 and the SERP provided benefits to participants as if the Qualified Pension Plan had not been frozen. Because the Qualified Pension Plan was frozen and because new employees were not eligible to participate in the Qualified Pension Plan, our Board of Directors adopted amendments to the SERP on October 8, 2013 that were effective as of December 31, 2013 to simplify the SERP calculation. The SERP is funded through a Rabbi Trust with BMO Harris Bank N.A. Under the amended SERP, participants received an accrued lump-sum benefit as of December 31, 2013 which was credited to each participant’s account. Subsequent to December 31, 2013, each eligible participant receives a supplemental retirement benefit equal to the foregoing lump-sum benefit, plus an annual benefit accrual equal to 8 percent of the participant’s base salary and cash bonus, plus annual credited interest on the participant’s account balance. All then current participants as of December 31, 2013 are fully vested in their account balances with any new individuals participating in the SERP effective on or after January 1, 2014 being subject to a five year vesting period. The SERP, which is considered a defined benefit plan under applicable rules and regulations of the Internal Revenue Code, will continue to be funded through use of a Rabbi Trust to hold investment assets to be used in part to fund any future required lump sum benefit payments to participants. The Rabbi Trust assets had a value of $2.8 million at July 1, 2018 and $2.6 million at July 2, 2017, and are included in Other Long-Term Assets in the accompanying Consolidated Balance Sheets. The projected benefit obligation under the amended SERP was $1.9 million at July 1, 2018 and $1.8 million at July 2, 2017. The SERP liabilities are included in the pension tables below. However, the Rabbi Trust assets are excluded from the tables as they do not qualify as plan assets.

We also sponsor a postretirement health care plan for all U.S. associates hired prior to June 1, 2001. The expected cost of retiree health care benefits is recognized during the years the associates who are covered under the plan render service. Effective January 1, 2010, an amendment to the postretirement health care plan limited the benefit for future eligible retirees to $4,000 per plan year and the benefit is further subject to a maximum five year coverage period based on the associate’s retirement date and age. The postretirement health care plan is unfunded.

Amounts included in accumulated other comprehensive loss, net of tax, at July 1, 2018, which have not yet been recognized in net periodic benefit cost were as follows (thousands of dollars):

 

     Pension and SERP    Postretirement

Prior service credit

     $ -      $ (294 )

Net actuarial loss

       16,515        1,927
    

 

 

      

 

 

 
     $ 16,515      $   1,633
    

 

 

      

 

 

 

Prior service cost (credit) and unrecognized net actuarial losses included in accumulated other comprehensive loss at July 1, 2018 which are expected to be recognized in net periodic benefit cost (credit) in fiscal 2019, net of tax, for the pension, SERP and postretirement plans are as follows (thousands of dollars):

 

     Pension and SERP    Postretirement

Prior service credit

     $ -      $   (336

Net actuarial loss

       1,272        329
    

 

 

      

 

 

 
     $ 1,272      $ (7 )
    

 

 

      

 

 

 
 

 

2018  STRATTEC  Annual  Report    53


LOGO

NOTES TO FINANCIAL STATEMENTS

 

 

The following tables summarize the pension, SERP and postretirement plans’ income and expense, funded status and actuarial assumptions for the years indicated (thousands of dollars). We use a June 30 measurement date for our pension and postretirement plans.

 

     Pension and SERP Benefits      Postretirement Benefits
     Years Ended      Years Ended
     July 1,   July 2,   July 3,      July 1,   July 2,   July 3,
    

2018

 

2017

 

2016

    

2018

 

2017

 

2016

COMPONENTS OF NET PERIODIC BENEFIT COST (CREDIT):                            

Service cost

     $      66     $      54     $ 50        $ 13     $ 13     $ 12

Interest cost

       3,857       3,926       4,387          45       55       87

Expected return on plan assets

       (6,111 )       (5,854 )       (5,509 )          -       -       -

Amortization of prior service cost (credit)

       12       11       11          (764 )       (764 )       (764 )

Amortization of unrecognized net loss

       2,035       3,228       2,443            479       538       616
    

 

 

     

 

 

     

 

 

        

 

 

     

 

 

     

 

 

 

Net periodic benefit cost (credit)

     $ (141 )     $ 1,365     $ 1,382        $ (227 )     $ (158 )     $ (49 )
    

 

 

     

 

 

     

 

 

        

 

 

     

 

 

     

 

 

 
    Pension and SERP Benefits      Postretirement Benefits
   

2018

 

2017

    

2018

  

2017

WEIGHTED-AVERAGE ASSUMPTIONS:

 

               

Benefit Obligations:

                   

Discount rate

      4.30%       3.91%          4.30%        3.91%

Rate of compensation increases - SERP

      3.0%       3.0%          n/a        n/a

Net Periodic Benefit Cost:

                   

Discount rate

      3.91%       3.79%          3.91%        3.79%

Expected return on plan assets

      5.45%       5.45%          n/a        n/a

Rate of compensation increases - SERP

      3.0%       3.0%          n/a        n/a
CHANGE IN PROJECTED BENEFIT OBLIGATION:                    

Benefit obligation at beginning of year

    $   101,266     $   106,152        $ 1,268      $ 1,602

Service cost

      66       54          13        13

Interest cost

      3,857       3,926          45        55

Actuarial gain

      (1,392 )       (4,342 )          (8 )        (80 )

Benefits paid

      (4,962 )       (4,524 )          (277 )        (322 )
   

 

 

     

 

 

        

 

 

      

 

 

 

Benefit obligation at end of year

    $ 98,835     $ 101,266        $ 1,041      $ 1,268
   

 

 

     

 

 

        

 

 

      

 

 

 

CHANGE IN PLAN ASSETS:

                   

Fair value of plan assets at beginning of year

    $ 112,524     $ 104,460        $ -      $ -

Actual return on plan assets

      3,890       7,574          -        -

Employer contribution

      14       5,014          277        322

Benefits paid

      (4,962 )       (4,524 )          (277 )        (322 )
   

 

 

     

 

 

        

 

 

      

 

 

 

Fair value of plan assets at end of year

    $ 111,466     $ 112,524        $ -      $ -
   

 

 

     

 

 

        

 

 

      

 

 

 

Funded status – prepaid (accrued) benefit obligations

    $ 12,631     $ 11,258          $ (1,041 )      $ (1,268 )
   

 

 

     

 

 

        

 

 

      

 

 

 
AMOUNTS RECOGNIZED IN CONSOLIDATED BALANCE SHEETS:                    

Other long-term assets

    $ 14,547     $ 13,082        $ -      $ -

Accrued payroll and benefits (current liabilities)

      (363 )       (332 )          (215 )        (265 )

Accrued benefit obligations (long-term liabilities)

      (1,553 )       (1,492 )          (826 )        (1,003 )
   

 

 

     

 

 

        

 

 

      

 

 

 

Net amount recognized

    $ 12,631     $ 11,258          $ (1,041 )      $ (1,268 )
   

 

 

     

 

 

        

 

 

      

 

 

 
CHANGES IN PLAN ASSETS AND BENEFIT OBLIGATIONS RECOGNIZED IN OTHER COMPREHENSIVE INCOME:                    

Net periodic benefit (credit) cost

    $ (141 )     $ 1,365        $ (227 )      $ (158 )
   

 

 

     

 

 

        

 

 

      

 

 

 

Net actuarial loss (gain)

      828       (6,063 )          (8 )        (80 )

Amortization of prior service (cost) credits

      (12 )       (11 )          764        764

Amortization of unrecognized net loss

      (2,035 )       (3,228 )          (479 )        (538 )
   

 

 

     

 

 

        

 

 

      

 

 

 

Total recognized in other comprehensive (income) loss, before tax

      (1,219 )       (9,302 )               277              146
   

 

 

     

 

 

        

 

 

      

 

 

 

Total recognized in net periodic benefit cost and other comprehensive (income) loss, before tax

    $ (1,360 )     $ (7,937 )        $ 50      $ (12 )
   

 

 

     

 

 

        

 

 

      

 

 

 
 

 

2018  STRATTEC  Annual  Report    54


NOTES TO FINANCIAL STATEMENTS

 

 

The pension benefits have a separately determined accumulated benefit obligation, which is the actuarial present value of benefits based on service rendered and current and past compensation levels. This differs from the projected benefit obligation in that it includes no assumptions about future compensation levels. The following table summarizes the accumulated benefit obligations and projected benefit obligations for the pension and SERP (thousands of dollars):

 

     Pension    SERP
     July 1, 2018    July 2, 2017    July 1, 2018    July 2, 2017

Accumulated benefit obligation

       $96,919        $99,442        $1,749        $1,591

Projected benefit obligation

       $96,919        $99,442        $1,916        $1,824

For measurement purposes as it pertains to the estimated obligation associated with retirees prior to January 1,2010, a 7.4 percent annual rate increase in the per capita cost of covered health care benefits was assumed for fiscal 2019; the rate was assumed to decrease gradually to 4.5 percent by the year 2025 and remain at that level thereafter.

The health care cost trend assumption has a minimal effect on our postretirement benefit amounts reported. A1% change in the health care cost trend rates would have the following effects (thousands of dollars):

 

     1% Increase         1% Decrease

Effect on total of service and interest cost components in fiscal 2018

     $ -                  $ -  

Effect on postretirement benefit obligation as of July 1, 2018

     $  5           $  (4)  

We employ a total return investment approach whereby a mix of equities and fixed income investments are used to maximize the long-term return of plan assets for a prudent level of risk. Risk tolerance is established through careful consideration of short and long-term plan liabilities, plan funded status and corporate financial condition. The investment portfolio primarily contains a diversified blend of equity and fixed income investments. Furthermore, equity investments are diversified across U.S. and non-U.S. stocks, as well as growth and value style managers, and small, mid and large market capitalizations. The investment portfolio does not include any real estate holdings. The investment policy of the plan prohibits investment in STRATTEC stock. Investment risk is measured and monitored on an ongoing basis through periodic investment portfolio reviews, annual liability measurements and periodic asset/liability studies. The pension plan weighted-average asset allocations by asset category were as follows for 2018 and 2017:

 

   

Target Allocation

   July 1, 2018    July 2, 2017

Equity investments

      0-50%          13%        38%

Fixed-income investments /cash

      50-100              87            62   
   

 

 

      

 

 

      

 

 

 

Total

      100%        100%        100%
        

 

 

      

 

 

 

The following is a summary, by asset category, of the fair value of pension plan assets at the June 30, 2018 and June 30, 2017 measurement dates (thousands of dollars):

 

     June 30, 2018    June 30, 2017

Asset Category

  

Level 1

  

Level 2

  

Level 3

  

Total

  

Level 1

  

Level 2

  

Level 3

  

Total

Cash and cash equivalents

     $ -      $ 7,617      $ -      $ 7,617      $ -      $ 7,233      $ -      $ 7,233

Equity securities/funds:

                                       

Small cap

       -        -        -        -        1,008        -        -        1,008

Mid cap

       4,953        -        -        4,953        12,414        -        -        12,414

Large cap

       4,945        -        -        4,945        19,961        -        -        19,961

International

       4,443        -        -        4,443        8,941        -        -        8,941

Fixed income:

                                       

Bond funds/bonds

       -        89,508        -        89,508        5,718        57,249        -        62,967
    

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

 

Total

     $ 14,341      $ 97,125      $         -      $ 111,466      $ 48,042      $ 64,482      $         -      $ 112,524
    

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

 

There were no transfers in or out of Level 3 investments during the measurement year ended June 30, 2018.

The expected long-term rate of return on U.S. pension plan assets used to calculate net periodic benefit cost was 4.05 percent for 2019 and 5.45 percent for 2018. In connection with the planned termination of the Qualified Pension Plan, we have shifted the target asset allocation to 0 - 50 percent public equity and 50 - 100 percent fixed income/cash in 2018 from the previous years’ target allocation of 35 percent public equity and 65 percent fixed income/cash. The 4.05 percent is approximated by applying returns of 10 percent on public equity and 3 percent on fixed income/cash to the target allocation. The actual historical returns are also relevant. Annualized returns for periods ended June 30, 2018 were 2.97 percent for 5 years, 3.98 percent for 10 years, 4.28 percent for 15 years, 4.80 percent for 20 years, 5.21 percent for 25 years and 5.97 percent for 30 years.

We do not expect to make contributions to our qualified pension plan in fiscal 2019. We expect to contribute $364,000 to our SERP and $215,000 to our postretirement health care plan in fiscal 2019. The following benefit payments, which reflect expected future service, as appropriate, are expected to be paid during the fiscal years noted below (thousands of dollars):

 

   

Pension and SERP Benefits

  

Postretirement Benefits

2019

  $  5,719     $  215

2020

  $  5,760     $  163

2021

  $  6,360     $  146

2022

  $  6,411     $  135

2023

  $  6,136     $  108

2024-2028

  $31,401     $  254
 

 

2018  STRATTEC  Annual  Report    55


LOGO

NOTES TO FINANCIAL STATEMENTS

 

 

All U.S. associates may participate in our 401(k) Plan. We contribute 100 percent up to the first 5 percent of eligible compensation that a participant contributes to the plan. Our contributions to the 401(k) Plan were as follows (thousands of dollars):

 

     Years Ended
     July 1, 2018    July 2, 2017    July 3, 2016

Company contributions

       $  1,793          $  1,805          $  1,783  

SHAREHOLDERS’ EQUITY

We have 12,000,000 shares of authorized common stock, par value $.01 per share, with 3,635,203 and 3,596,616 shares outstanding at July 1, 2018 and July 2, 2017, respectively. Holders of our common stock are entitled to one vote for each share on all matters voted on by shareholders.

Our Board of Directors authorized a stock repurchase program to buy back up to 3,839,395 outstanding shares of our common stock as of July 1, 2018. As of July 1, 2018, 3,655,322 shares have been repurchased under this program at a cost of approximately $136.4 million. No shares were repurchased under this program during 2018 or 2017.

EARNINGS PER SHARE (“EPS”)

Basic earnings per share is computed on the basis of the weighted average number of shares of common stock outstanding during the applicable period. Diluted earnings per share is computed on the basis of the weighted average number of shares of common stock plus the potential dilutive common shares outstanding during the applicable period using the treasury stock method. Potential dilutive common shares include outstanding stock options and unvested restricted stock awards. A reconciliation of the components of the basic and diluted per share computations follows (in thousands, except per share amounts):

 

     Years Ended
     July 1,
2018
   July 2,
2017
   July 3,
2016

Net income attributable to STRATTEC

     $ 12,283      $ 7,197        $9,149

Less: Income attributable to participating securities

       -        1        58
    

 

 

      

 

 

      

 

 

 

Net income attributable to common shareholders

     $ 12,283      $   7,196        $9,091
    

 

 

      

 

 

      

 

 

 

Weighted average shares of common stock outstanding

       3,628        3,588        3,559

Incremental shares – stock based compensation

       75        82        62
    

 

 

      

 

 

      

 

 

 

Diluted weighted average shares of common stock outstanding

       3,703        3,670        3,621
    

 

 

      

 

 

      

 

 

 

Basic earnings per share

     $ 3.39      $ 2.01        $2.55
    

 

 

      

 

 

      

 

 

 

Diluted earnings per share

     $ 3.32      $ 1.96        $    2.51
    

 

 

      

 

 

      

 

 

 

We consider unvested restricted stock that provides the holder with a non-forfeitable right to receive dividends to be a participating security.

Options to purchase shares of common stock that were excluded from the calculation of diluted earnings per share because their inclusion would have been antidilutive were as follows:

 

Years Ended

   Number of Options Excluded

July 1, 2018

       41,200

July 2, 2017

       9,010

July 3, 2016

       9,010

STOCK OPTION AND PURCHASE PLANS    

A summary of stock option activity under our stock incentive plan was as follows:

 

     Shares   Weighted
Average
Exercise
Price
   Weighted Average
Remaining
Contractual Term
(in years)
   Aggregate
Intrinsic
Value
(in thousands)

Balance at June 28, 2015

       163,907     $ 27.97          
    

 

 

               

Exercised

       (16,909 )     $ 21.55          

Terminated

       (2,000 )     $ 17.59          
    

 

 

               

Balance at July 3, 2016

       144,998     $ 28.86          
    

 

 

               

Exercised

       (6,490 )     $ 20.96          
    

 

 

               

Balance at July 2, 2017

       138,508     $ 29.23          
    

 

 

               

Exercised

       (5,434 )     $ 25.64          
    

 

 

               

Balance at July 1, 2018

       133,074     $ 29.37        3.4      $ 862
    

 

 

               

Exercisable as of:

                  

July 1, 2018

       133,074     $ 29.37        3.4      $ 862

July 2, 2017

       129,498     $ 25.71        4.2      $ 1,361

July 3, 2016

       103,798     $ 21.39        4.6      $ 2,174

No options were granted during fiscal 2018, 2017 or 2016.    

 

 

2018  STRATTEC  Annual  Report    56


NOTES TO FINANCIAL STATEMENTS

 

 

A summary of restricted stock activity under our stock incentive plan was as follows:

     Shares   Weighted Average
Grant Date Fair Value

Nonvested Balance at June 28, 2015

       66,350     $ 45.03
    

 

 

     

Granted

       28,750     $ 69.02

Vested

       (20,300 )     $ 23.69

Forfeited

       (3,050 )     $ 59.92
    

 

 

     

Nonvested Balance at July 3, 2016

       71,750     $ 60.05
    

 

 

     

Granted

       27,150     $ 43.87

Vested

       (21,250 )     $ 37.53

Forfeited

       (1,800 )     $ 58.24
    

 

 

     

Nonvested Balance at July 2, 2017

       75,850     $ 60.61
    

 

 

     

Granted

       27,950     $ 33.30

Vested

       (30,400 )     $ 62.99

Forfeited

       (4,275 )     $ 52.47
    

 

 

     

Nonvested Balance at July 1, 2018

       69,125     $ 49.02
    

 

 

     

We have an Employee Stock Purchase Plan to provide substantially all U.S. full-time associates an opportunity to purchase shares of STRATTEC common stock through payroll deductions. A participant may contribute a maximum of $5,200 per calendar year to the plan. On the last day of each month or if such date is not a trading day on the most recent previous trading day, participant account balances are used to purchase shares of our common stock at the average of the highest and lowest reported sales prices of a share of STRATTEC common stock on the NASDAQ Global Market on such date. A total of 100,000 shares may be issued under the plan. Shares issued from treasury stock under the plan totaled 2,753 at an average price of $37.06 during 2018, 3,019 at an average price of $34.88 during 2017 and 1,948 at an average price of $55.77 during 2016. A total of 61,412 shares remain available for purchase under the plan as of July 1, 2018.

EXPORT SALES

Total export sales, sales from the United States to locations outside of the United States, are summarized as follows (thousands of dollars and percent of total net sales):

 

    Years Ended
    July 1, 2018   July 2, 2017   July 3, 2016
    Net Sales    %   Net Sales    %   Net Sales    %
          

 

 

 

Export sales

  $157,862    36%   $160,275    38%   $152,728    38%

Countries for which customer sales account for ten percent or more of total net sales are summarized as follows (thousands of dollars and percent of total net sales):

 

    Years Ended
    July 1, 2018   July 2, 2017   July 3, 2016
    Net Sales    %   Net Sales    %   Net Sales    %
          

 

 

 

Export sales into Canada

  $70,920    16%   $73,481    18%   $74,310    19%

PRODUCT SALES    

Sales by product group were as follows (thousands of dollars and percent of total net sales):

     Years Ended
     July 1, 2018   July 2, 2017   July 3, 2016
     Net Sales    %   Net Sales    %   Net Sales    %
           

 

 

 

Keys & locksets

     $ 118,256        27 %     $ 114,938        28 %     $ 113,765        28 %

Door handles & exterior trim

       88,788        20       67,722        16       61,376        15

Power access

       86,380        20       84,457        20       83,747        21

Driver controls

       51,817        12       56,983        14       55,955        14

Aftermarket & OE service

       43,311        10       47,216        11       48,200        12

Latches

       42,381        9       35,307        8       28,023        7

Other

       8,262        2       10,702        3       10,353        3
    

 

 

      

 

 

     

 

 

      

 

 

     

 

 

      

 

 

 
     $ 439,195        100 %     $ 417,325        100 %     $ 401,419        100 %
    

 

 

      

 

 

     

 

 

      

 

 

     

 

 

      

 

 

 

SALES AND RECEIVABLE CONCENTRATION    

Sales to our largest customers were as follows (thousands of dollars and percent of total net sales):

 

     Years Ended
     July 1, 2018   July 2, 2017   July 3, 2016
     Net Sales    %   Net Sales    %   Net Sales    %
           

 

 

 

Fiat Chrysler Automobiles

     $ 110,650        25 %     $ 100,575        24 %     $ 115,858        29 %

General Motors Company

       85,827        20       88,624        21       79,893        20

Ford Motor Company

       64,427        14       62,314        15       57,317        14
    

 

 

      

 

 

     

 

 

      

 

 

     

 

 

      

 

 

 
     $ 260,904        59 %     $ 251,513        60 %     $ 253,068        63 %
    

 

 

      

 

 

     

 

 

      

 

 

     

 

 

      

 

 

 

Receivables from our largest customers were as follows (thousands of dollars and percent of gross receivables):

     July 1, 2018   July 2, 2017
     Receivables    %   Receivables    %
       

 

 

 

Fiat Chrysler Automobiles

     $ 19,908        27 %     $ 17,107        26 %

General Motors Company

       16,366        22       13,395        21

Ford Motor Company

       7,537        10       8,644        13
    

 

 

      

 

 

     

 

 

      

 

 

 
     $ 43,811        59 %     $ 39,146        60 %
    

 

 

      

 

 

     

 

 

      

 

 

 
 

 

2018  STRATTEC  Annual  Report    57


LOGO

REPORTS

 

 

REPORT  ON MANAGEMENT’S  ASSESSMENT  OF  INTERNAL

CONTROL  OVER  FINANCIAL  REPORTING

STRATTEC SECURITY CORPORATION is responsible for the preparation, integrity, and fair presentation of the consolidated financial statements included in this annual report. The consolidated financial statements and notes included in this annual report have been prepared in conformity with accounting principles generally accepted in the United States of America and necessarily include some amounts that are based on management’s best estimates and judgments.

We, as management of STRATTEC SECURITY CORPORATION, are responsible for establishing and maintaining effective internal control over financial reporting that is designed to produce reliable financial statements in conformity with United States generally accepted accounting principles. The system of internal control over financial reporting as it relates to the financial statements is evaluated for effectiveness by management and tested for reliability through a program of internal audits. Actions are taken to correct potential deficiencies as they are identified. Any system of internal control, no matter how well designed, has inherent limitations, including the possibility that a control can be circumvented or overridden and misstatements due to error or fraud may occur and not be detected. Also, because of changes in conditions, internal control effectiveness may vary over time. Accordingly, even an effective system of internal control will provide only reasonable assurance with respect to financial statement preparation.

The Audit Committee of the Company’s Board of Directors, consisting entirely of independent directors, meets regularly with management and the independent registered public accounting firm, and reviews audit plans and results, as well as management’s actions taken in discharging responsibilities for accounting, financial reporting, and internal control. Deloitte & Touche LLP, independent registered public accounting firm, has direct and confidential access to the Audit Committee at all times to discuss the results of their examinations.

Management assessed the Corporation’s system of internal control over financial reporting as of July 1, 2018, in relation to criteria for effective internal control over financial reporting as described in Internal Control – Integrated Framework (2013), issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Based on the assessment, management concluded that, as of July 1, 2018, its system of internal control over financial reporting was effective and met the criteria of the Internal Control –Integrated Framework. Deloitte & Touche LLP, independent registered public accounting firm, has issued an attestation report on the Corporation’s internal control over financial reporting, which is included herein.

 

LOGO    LOGO   
Frank J. Krejci    Patrick J. Hansen   
President and    Senior Vice President and   
Chief Executive Officer    Chief Financial Officer   
 

 

2018  STRATTEC  Annual  Report    58


REPORTS

 

 

REPORT  OF  INDEPENDENT  REGISTERED  PUBLIC

ACCOUNTING  FIRM

To the shareholders and the Board of Directors of STRATTEC SECURITY CORPORATION:

Opinion on Internal Control over Financial Reporting

We have audited the internal control over financial reporting of STRATTEC SECURITY CORPORATION and subsidiaries (the “Company”) as of July 1, 2018, based on criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of July 1, 2018, based on criteria established in Internal Control — Integrated Framework (2013) issued by COSO.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated financial statements as of and for the year ended July 1, 2018, of the Company and our report dated September 6, 2018, expressed an unqualified opinion on those financial statements.

Basis for Opinion

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Report on Management’s Assessment of Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

Definition and Limitations of Internal Control over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

LOGO

 

  
Deloitte & Touche LLP   
Milwaukee, Wisconsin   
September 6, 2018   
 

 

2018  STRATTEC  Annual  Report    59


LOGO

REPORTS

 

 

REPORT  OF  INDEPENDENT  REGISTERED

PUBLIC  ACCOUNTING  FIRM

To the shareholders and the Board of Directors of STRATTEC SECURITY CORPORATION:

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of STRATTEC SECURITY CORPORATION and subsidiaries (the “Company”) as of July 1, 2018 and July 2, 2017, the related consolidated statements of income and comprehensive income (loss), shareholders’ equity, and cash flows, for each of the three years in the period ended July 1, 2018, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of July 1, 2018 and July 2, 2017, and the results of its operations and its cash flows for each of the three years in the period ended July 1, 2018, in conformity with accounting principles generally accepted in the United States of America.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company’s internal control over financial reporting as of July 1, 2018, based on criteria established in Internal Control —Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated September 6, 2018, expressed an unqualified opinion on the Company’s internal control over financial reporting.

Basis for Opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

 

LOGO

 

  
Deloitte & Touche LLP   
Milwaukee, Wisconsin   
September 6, 2018   

We have served as the Company’s auditor since 2010.

 

 

2018  STRATTEC  Annual  Report    60


FINANCIAL SUMMARY

 

 

FIVE-YEAR FINANCIAL SUMMARY

The financial data for each period presented below reflects the consolidated results of STRATTEC SECURITY CORPORATION, its wholly owned Mexican subsidiary and its majority owned subsidiaries. Fiscal years 2014 and 2015 have been retrospectively adjusted for the adoption of an update to an accounting standard issued by the FASB which simplifies the presentation of deferred taxes in a classified statement of financial position by requiring that deferred tax assets and liabilities be classified as non-current. Fiscal years 2014 through 2017 have been retrospectively adjusted for the adoption of an update to the accounting guidance for the presentation of net periodic pension cost and net periodic postretirement benefit cost which requires the service cost component of net periodic benefit cost to be reported in the same line items as other compensation costs arising from services rendered by the pertinent employees during the applicable period while remaining components of net periodic benefit cost are required to be presented separately outside a subtotal of income from operations. The information below should be read in conjunction with “Management’s Discussion and Analysis,” and the Financial Statements and Notes thereto included elsewhere herein. The following data are in thousands of dollars except per share amounts.

 

     Fiscal Years  
    

2018

   

2017

   

2016

   

2015

   

2014

       

INCOME STATEMENT DATA

            

Net sales

   $ 439,195     $ 417,325     $ 401,419     $ 411,475     $ 348,419    

Gross profit

     54,443       60,955       65,726       73,230       66,448    

Engineering, selling and administrative expenses

     41,168       46,113       43,547       41,277       39,045    
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

Income from operations

     13,275       14,842       22,179       31,953       27,403    

Interest income

     8       136       25       185       106    

Equity earnings (loss) of joint ventures

     4,532       666       (2,235     (788     957    

Interest expense

     (1,137     (417     (176     (71     (45  

Other income (expense), net

     1,020       1,167       (603     2,654       (607  
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

Income before taxes and non-controlling interest

     17,698       16,394       19,190       33,933       27,814    

Provision for income taxes

     2,070       4,284       5,068       9,382       8,674    
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

Net income

     15,628       12,110       14,122       24,551       19,140    

Net income attributable to non-controlling interest

     3,345       4,913       4,973       3,897       2,716    
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

Net income attributable to

            

STRATTEC SECURITY CORPORATION

   $ 12,283     $ 7,197     $ 9,149     $ 20,654     $ 16,424    
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

Earnings per share attributable to STRATTEC SECURITY CORPORATION:

            

Basic

   $ 3.39     $ 2.01     $ 2.55     $ 5.80     $ 4.70    

Diluted

   $ 3.32     $ 1.96     $ 2.51     $ 5.66     $ 4.59    

Cash dividends declared per share

   $ 0.56     $ 0.56     $ 0.52     $ 0.48     $ 0.44    

BALANCE SHEET DATA

            

Net working capital

   $ 82,310     $ 61,110     $ 70,236     $ 63,871     $ 64,705    

Total assets

   $ 307,175     $ 273,714     $ 242,176     $ 230,834     $ 207,909    

Long-term liabilities

   $ 55,136     $ 33,105     $ 23,449     $ 13,698     $ 7,743    

Total STRATTEC SECURITY CORPORATION Shareholders’ equity

   $ 162,158     $ 151,088     $ 139,332     $ 140,312     $ 125,506    
 

 

2018  STRATTEC  Annual  Report    61


LOGO

FINANCIAL SUMMARY

 

 

QUARTERLY FINANCIAL DATA (UNAUDITED)

Fiscal 2017 quarterly financial data has been retrospectively adjusted for the adoption of an update to the accounting guidance for the presentation of net periodic pension cost and net periodic postretirement benefit cost which requires the service cost component of net periodic benefit cost to be reported in the same line items as other compensation costs arising from services rendered by the pertinent employees during the applicable period while remaining components of net periodic benefit cost are required to be presented separately outside a subtotal of income from operations. The following data are in thousands of dollars except per share amounts.

 

     Quarter    Net Sales    Gross Profit   

Net Income
Attributable to

STRATTEC

   Earnings
Per Share
  

Cash
Dividends
Declared

Per Share

   Market Price Per Share
   Basic    Diluted    High    Low

2018

   First      $ 102,460      $ 13,463      $ 2,456      $ 0.68      $ 0.67      $ 0.14      $ 43.85      $ 30.05
   Second        103,182        12,646        2,882        0.79        0.78        0.14      $ 49.20      $ 39.00
   Third        116,823        15,197        2,969        0.82        0.80        0.14      $ 46.40      $ 33.10
   Fourth        116,730        13,137        3,976        1.09        1.07        0.14      $ 40.40      $ 30.25
       

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

           
   TOTAL      $ 439,195      $ 54,443      $ 12,283      $ 3.39      $ 3.32      $ 0.56          
       

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

           

2017

   First      $ 100,244      $ 14,803      $ 1,542      $ 0.43      $ 0.42      $ 0.14      $ 48.86      $ 34.76
   Second        98,945        13,694        398        0.11        0.11        0.14      $ 44.00      $ 31.05
   Third        109,706        17,601        3,482        0.97        0.95        0.14      $ 44.43      $ 25.65
   Fourth        108,430        14,857        1,775        0.49        0.48        0.14      $ 39.10      $ 23.00
       

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

           
   TOTAL      $ 417,325      $ 60,955      $ 7,197      $ 2.01      $ 1.96      $ 0.56          
       

 

 

      

 

 

      

 

 

      

 

 

      

 

 

      

 

 

           

Registered shareholders of record at July 1, 2018, were 1,174.    

 

 

2018  STRATTEC  Annual  Report    62


PERFORMANCE GRAPH

 

 

The chart below shows a comparison of the cumulative return since June 30, 2013 had $100 been invested at the close of business on June 30, 2013 in STRATTEC Common Stock, the NASDAQ Composite Index (all issuers), and the Dow Jones U.S. Auto Parts Index.

 

LOGO

 

     6/30/13    6/29/14    6/28/15    7/3/16    7/2/17    7/1/18

STRATTEC SECURITY CORPORATION**

       100.00        178.32        190.81        116.04        98.58        86.40

NASDAQ Composite Index

       100.00        132.45        151.00        148.88        189.66        233.12

Dow Jones U.S. Auto Parts Index

       100.00        135.92        146.53        127.68        157.51        177.30

* $100 invested on 6/30/13 in stock or in index, including reinvestment of dividends. Indexes calculated on a month-end basis.

**The Friday fiscal year end closing price (i.e. the last trading day prior to our fiscal year end) of STRATTEC Common Stock on June 28, 2013 was $37.36, the closing price on June 27, 2014 was $66.06, the closing price on June 26, 2015 was $70.26, the closing price on July 1, 2016 was $42.33, the closing price on June 30, 2017 was $35.40 and the closing price on June 29, 2018 was $30.55.

 

 

2018  STRATTEC  Annual  Report    63


LOGO


LOGO

strt-ex21_11.htm

Exhibit 21

 

 

 

 

SUBISIDARIES OF THE COMPANY

 

 

 

Subsidiary

 

Country of Incorporation

 

Percent Owned

 

 

 

 

 

STRATTEC de Mexico S.A. de C.V.

 

Mexico

 

100%

 

 

 

 

 

ADAC-STRATTEC LLC

 

United States

 

51%

 

 

 

 

 

STRATTEC POWER ACCESS LLC

 

United States

 

80%

 

 

strt-ex23_10.htm

Exhibit 23

CONSENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

We consent to the incorporation by reference in Registration Statement Nos. 333-103219, 333-31002, 333-45221, 333-4300, 333-140715 and 333-199906 on Form S-8 of our reports dated September 6, 2018, relating to the consolidated financial statements of STRATTEC SECURITY CORPORATION, and the effectiveness of STRATTEC SECURITY CORPORATION’s internal control over financial reporting, appearing in this Annual Report on Form 10-K of STRATTEC SECURITY CORPORATION for the year ended July 1, 2018.

/s/ Deloitte & Touche LLP

 

Milwaukee, Wisconsin
September 6, 2018

 

 

 

 

strt-ex311_8.htm

Exhibit 31.1

CERTIFICATION OF CHIEF EXECUTIVE OFFICER

PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002

I, Frank J. Krejci, certify that:

1.I have reviewed this annual report on Form 10-K of STRATTEC SECURITY CORPORATION;

2.Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4.The registrant's other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

(a)designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

(b)designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

(c)evaluated the effectiveness of the registrant's disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

(d)disclosed in this report any change in the registrant's internal control over financial reporting that occurred during the registrant's most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant's internal control over financial reporting; and

5.The registrant's other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of registrant's board of directors (or persons performing the equivalent functions):

(a)all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant's ability to record, process, summarize and report financial information; and

(b)any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant's internal control over financial reporting.

 

 

Date:  September 6, 2018

 

 

 

/s/ Frank J. Krejci

 

 

Frank J. Krejci

 

 

Chief Executive Officer

 

strt-ex312_7.htm

Exhibit 31.2

CERTIFICATION OF CHIEF FINANCIAL OFFICER

PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002

I, Patrick J. Hansen, certify that:

1.I have reviewed this annual report on Form 10-K of STRATTEC SECURITY CORPORATION;

2.Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4.The registrant's other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

(a)designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

(b)designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

(c)evaluated the effectiveness of the registrant's disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

(d)disclosed in this report any change in the registrant's internal control over financial reporting that occurred during the registrant's most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant's internal control over financial reporting; and

5.The registrant's other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of registrant's board of directors (or persons performing the equivalent functions):

(a)all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant's ability to record, process, summarize and report financial information; and

(b)any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant's internal control over financial reporting.

 

 

Date:  September 6, 2018

 

 

 

/s/ Patrick J. Hansen

 

 

Patrick J. Hansen,

 

 

Chief Financial Officer

 

strt-ex32_9.htm

Exhibit 32

 

CERTIFICATION OF PERIODIC FINANCIAL REPORT

PURSUANT TO 18 U.S.C. SECTION 1350

 

 

Pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, each of the undersigned officers of STRATTEC SECURITY CORPORATION (the "Company") certifies that the Annual Report on Form 10-K of the Company for the year ended July 1, 2018 fully complies with the requirements of Section 13(a) of the Securities Exchange Act of 1934 and information contained in that Form 10-K fairly presents, in all material respects, the financial condition and results of operations of the Company.

 

 

 

Dated:  September 6, 2018

/s/ Frank J. Krejci

Frank J. Krejci,

Chief Executive Officer

 

 

 

Dated:  September 6, 2018

/s/ Patrick J. Hansen

Patrick J. Hansen,

Chief Financial Officer

 

 

This certification is made solely for purpose of 18 U.S.C. Section 1350, subject to the knowledge standard contained therein, and not for any other purpose.